Re: Illegal address in DataPort
Shawn Silverman <[email protected]>
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <[email protected]> |
Yes, but isn't there one meg of flash from 0x400000 to 0x4fffff on the m400? I need to use that, and unless it is also connected to 0x600000, then I can't use that address :) I'm going to consult the native documentation again... Thanks, -Shawn On 9-Feb-04, at 4:40 PM, Mark Purcell [MAP] wrote: > Well I see your point. But the expansion flash area on a Tini 390 > module is > not needed by the OS, this is still in CE0* space though. > > With reference to the memory map: > http://www.systronix.com/tinistik/memory_map.html > > My guess is that CE0*, CE1* and CE2* are all protected, which would > mean > from 0x600000 upwards is OK. Try reading there and see what happens. > > Mark. _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini