Re: re: streaming images from the Tini
Bryan Armstrong <bryan.armstrong-6tN4nzCoH/[email protected]>
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <[email protected]> |
Nelson Lai wrote: > Hi, > > I was looking through the NetCam article described here: > > http://lists.dalsemi.com/maillists/tini/2003-February/024344.html > > and was wondering if anyone had actually constructed the unit and tested it > for the max FPS possible. I'm thinking about experimenting with a camera > that does JPEG compression. This would decrease the size of each image and > hopefully allow me to up the FPS for a more fluid look. I did a rough > back-of-the-envelope calculation and found that transferring > 320x240x8bitx15fps MJPEG stream should take only around 56kilobytes/s. Is > this within the range of possible transfer speed from the camera to the c400 > and then out over a network? Yes, the camera was constructed and 6 fps was possible in one configuration. You should be able to transfer 200Kbytes/second at 29MHz. -- -- Bryan Armstrong bryan.armstrong-6tN4nzCoH/[email protected] _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini