Netboot problems
Mark Wolforth <[email protected]>
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <[email protected]> |
Hello TINIworld, I've been trying to get netboot to work reliably. What I seem to have found is that netboot works fine when the FLASH is erased and works fine if the contents of the FLASH match what's coming from the tftp server (i.e. you're programming the FLASH with exactly the same info). If the info is different then the netboot fails. This suggests to me that the netboot routines in the B1 DS80C400 ROM don't erase the FLASH properly before trying to program it. Can anyone confirm if this is the case? If so, is there a work around? We'd been planning on using netboot to do firmware upgrades in the field, but there's not much point if you can only program the board with what it's already got. Mark. _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini