RE: serial0 on TINI 400

Hello,

   I forgot to tell you that i had already stopped the
serial server.
   The problem was that I had to take off the DTR from
the serial cable when I connect it to serial0. Now
serial0 is working fine.
   Thanks for your answers to everyone.

Mihaela Tarjoianu



--- Jeremy Kongs <jeremy.kongs-6tN4nzCoH/[email protected]> wrote:
> What is the nature of your problem?
> 
> You may be having a problem successfully getting
> ownership of serial0 due to
> Slush.  Slush uses serial0 for its serial terminal
> server.  Slush will give
> up the port if it is requested but you need to allow
> ~5 seconds for this to
> happen.  Try changing        sP =
> (SerialPort)portId.open(interfaceName,
> 10);  to sP = (SerialPort)portId.open(interfaceName,
> 5000);  This should
> give Slush sufficient time to give up the port.
> 
> Jeremy
> 
> > -----Original Message-----
> > From: tini-admin-6tN4nzCoH/[email protected]
> [mailto:tini-admin-6tN4nzCoH/[email protected]]On Behalf Of
> > Mihaela Tarjoianu
> > Sent: Tuesday, March 02, 2004 9:03 AM
> > To: Tini List
> > Subject: [TINI]serial0 on TINI 400
> >
> >
> >
> > Hello,
> >
> >    I have some trouble with using serial0 on TINI
> 400.
> > I want to read what is comming on serial0.
> >    The following program is working perfect form
> > serial4, but not for serial0.
> >
> > portNum=0;
> > try
> >  {
> >    CommPortIdentifier portId =
> > CommPortIdentifier.getPortIdentifier("serial" +
> > portNum);
> >     try{
> >       sP = (SerialPort)portId.open(interfaceName,
> 10);
> >     }catch (PortInUseException e){
> >         System.out.println("Port in use");
> >         return;
> >     }
> >
> >     sP.setSerialPortParams(4800,
> >                            SerialPort.DATABITS_8,
> >                            SerialPort.STOPBITS_1,
> >                           
> SerialPort.PARITY_NONE);
> >
> >     sP.setFlowControlMode(sP.FLOWCONTROL_NONE);
> >
> >     modemInputStream = sP.getInputStream();
> >
> >     // Clear any old input data
> >     long available = modemInputStream.available();
> >     if (available > 0)
> > modemInputStream.skip(available);
> >  }
> >  catch (Exception e)
> >  {
> >    System.out.println(e.toString());
> >    return;
> >  }
> >
> >  System.out.println("Open serial"+portNum+"
> port");
> >
> > // reading
> >
> > while(true){
> >  try{
> >   int bytesAvailable=modemInputStream.available();
> >   if (bytesAvailable>0){
> >
> >      // Read available data
> >      byte[] readBuffer = new byte[bytesAvailable];
> >      int numBytes =
> modemInputStream.read(readBuffer,
> > 0, bytesAvailable);
> >      System.out.println(new String(readBuffer, 0,
> > numBytes));
> >
> >    }
> >  }catch(IOException ioe){ioe.printStackTrace();}
> >  }
> >
> >    Do you know what the problem migth be?
> >    Thanks for any sugestion.
> >
> > Mihaela
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Search - Find what you're looking for
> faster
> > http://search.yahoo.com
> > _______________________________________________
> > TINI mailing list
> > TINI-6tN4nzCoH/[email protected]
> > To UNSUBSCRIBE, edit your profile, or see list
> archives:
> > http://lists.dalsemi.com/mailman/listinfo/tini
> 


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com
_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini