Re: No response from TINI
Bryan Armstrong <bryan.armstrong-6tN4nzCoH/[email protected]>
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <[email protected]> |
Sidi Alaa Eddine Drissi Bakhkhat wrote: > Hello > > I am using E20 socket board and the Tini stick with the ds80c390. After > soldering for the parellel I/O, the 74VHC574M (Octal D-Type Flip-Flop) and > the 74VHC541M (octal line Driver)and semiconductor - both ICs are from > Fairchild by the way - I still get the message (no response from Tini). > I've checked the following: > commapi installation is Ok > DTR Reset is enabled > PC serial port is Ok > > Has anyone an idea what is happening ? The logic is either loading the address/data bus, or driving the outputs at the wrong time. Check the output enables for proper connection. -- -- Bryan Armstrong bryan.armstrong-6tN4nzCoH/[email protected] _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini