Why I Can not boot TINIOS on my Board ?
θζδΌ <smallwei-GPb/JpGppDLkQYj/[email protected]> Mon, 14 Jun 2004 09:10:35 +0800
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <002b01c451ac$68207980$c47ba8c0@sky> |
Hi All,
I designed a board using DS80C400.
The TINIOS can not run on my board after a load the tini_400.tbin and Slush_400.tbin correctly and hit E, nothing appear and I can not got any message, why? The board has 512KBytes SRAM on CE0 and 1MBytes flash on CE2, dose it enough for TINIOS to run? The message looks like this below
DS80C400 Silicon Software - Copyright (C) 2002 Maxim Integrated Products
Detailed product information available at http://www.maxim-ic.com
Welcome to the TINI DS80C400 Auto Boot Loader 1.0.1
>
Loading file: C:\tini1.12\bin\tini_400.tbin.
Please wait... (ESC to abort.)
Load complete.
>
Loading file: C:\tini1.12\bin\Slush_400.tbin.
Please wait... (ESC to abort.)
Load complete.
>
DS80C400 Silicon Software - Copyright (C) 2002 Maxim Integrated Products
Detailed product information available at http://www.maxim-ic.com
Welcome to the TINI DS80C400 Auto Boot Loader 1.0.1
>E
Sincerrly,
Smallwei
_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini