Re: Reducing memory allocation for TINI file system in SRAM possible?
Bryan Armstrong <bryan.armstrong-6tN4nzCoH/[email protected]> Wed, 16 Jun 2004 11:18:21 -0500
| Newsgroups | gmane.comp.hardware.microcontrollers.tini |
|---|---|
| Message-ID | <[email protected]> |
Peter Wein wrote: > I am using a TINIm400 . On each of CE0 and CE1 512kb of SRAM are > installed. So for the TINI filesystem is 1 MB available. > It would be nice, if I could reduce it a little, to have some storage > for the variables of my ISR residing on bank 49. > > So where do I have to made the change to the system? In slush.jar or where? > > For any hints or even detailed solutions :-) I would be very glad! When TINIOS boots, it searches for SRAM on both CE0 and CE1. If you can disable the chip select on the CE1 RAM the OS will not find it. You could then toggle the pin to allow your application access. -- -- Bryan Armstrong bryan.armstrong-6tN4nzCoH/[email protected] _______________________________________________ TINI mailing list TINI-6tN4nzCoH/[email protected] To UNSUBSCRIBE, edit your profile, or see list archives: http://lists.dalsemi.com/mailman/listinfo/tini