m5329 evb

Hello:
I was trying to use the nand memory of my board in order to build a
standalone application. First, I  build a jjfs2 filesystem, and I tested, i
Tried to mount this, but I got the error:
* JFFS2 notice: (128) check_node_data : wrong data CRC in data node at
0x00aab400: read 0x72cd6873, calculated 0x8cb809df.
Empty flash at 0x000073f4 ends at 0x00007400

*Ok, after this I used dBUg to set /dev/mtdblock1 as the place to my system
to boot. But I got this:*

VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 76k freed (0x401e9000 - 0x401fb000)
Warning: unable to open an initial console.
Kernel panic - not syncing: No init found.  Try passing init= option to
kernel.
*
What is the matter?
Thanks

-- 
Bruno Rodrigues Nunes
Engenharia Elétrica - UNICAMP