Re: Interrupts in Codewarrior v8

I suggest you should try to use the quick start r4 from freescale if 
you use the evb from axiom.

--- In [email protected], "csuozzo" <csuozzo@y...> wrote:
> I'm trying to figure out how to get Codewarrior and my program to 
allow 
> my interrupt handler to process an interrupt generated by one of 
the 
> TPU channels (PTA). The "EPPC Exceptions" panel has been changed so 
> that program, external and trace exceptions should not trigger 
debug 
> mode. I've based all my interrupt related code on the programmable 
time 
> accumulator example in AN2365 (setup_ext_int.c).  While the program 
is 
> running, an interrupt is generated by the TPU, and the program 
stops 
> execution at this point (0x0000050c) for debugging.  I do get a 
linker 
> warning upon compiling: "No linker command file input for 
> section '.ext_isr' of type 'CODE' in 
> file 'C:\...\setup_ext_int.o'. '.ext_isr' will be input for the 
output 
> section '.init'."
> Any suggestions on how to handle this?  I greatly appreciate any 
advice 
> anyone could give.
> 
> Thanks!
> 
> Chris





-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MPC500/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/