RE: How to program the UC3FCFIG?
Dobbin Allan-r11834 <[email protected]>
| Newsgroups | gmane.comp.hardware.motorola.microcontrollers |
|---|---|
| Message-ID | <45E41B46B1F8D81183E4000F20D7C40B0B5682F0@az33exm40-bu.am.freescale.net> |
Put your data into an s-record - there are several ways to do that i.e. put your data as a constant at the correct org in an assembly file and assemble it to generate an s-record. With this method, you can use an assembler for ANY cpu since there are no opcodes involved. Allan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of john2turnip Sent: Thursday, May 05, 2005 10:56 PM To: [email protected] Subject: [MPC500] How to program the UC3FCFIG? I use the P&E BDM and Codewarrior's Flash Programmer to Program UC3FCFIG, I choose the "565_AXIOM_SHADOW_A.XML"to config the Programmer, I want to program 0x10002800H to UC3FCFIG,My problem is that how to load 0x10002800H to the programmer. thanks! ----------------------------------------------------------- To learn more about Freescale Microcontrollers, please visit http://www.freescale.com/mcu Yahoo! Groups Links ----------------------------------------------------------- To learn more about Freescale Microcontrollers, please visit http://www.freescale.com/mcu Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/MPC500/ <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/