Printf with MPC565?

Hello all
     I just have a question regarding printing with MPC565. I use the 
Metrowerks codewarrior BDI environment with the standard library.
I have two serial ports for printing. One port is connected to 
QSMCM_A.TXD1, QSMCM_A.RxD1. The other port is connected to 
QSMCM_B.TxD1,QSMCM_B.RxD1.
I made the initial settings for port1 and 2 as follows
QSMCM_A.SCC1R1.R=0x100C;QSMCM_A.SCC1R0.R=0x0082; 
QSMCM_B.SCC1R1.R=0x100C;QSMCM_B.SCC1R0.R=0x0082; 
which sets it to 9600 kBaud and printed from both the ports. From 
port1 the output was ok but I am unable to print from port2. The 
string to be printed on port2 gets printed on port1. 
My question is, is there a way to configure the printf to enable 
printing in port 2? What are the settings I need to make? 
Thanks in advance.

Regards
Vijay


	




-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MPC500/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/