Re: TPU HELP Please!
"murphynetuk" <[email protected]>
| Newsgroups | gmane.comp.hardware.motorola.microcontrollers |
|---|---|
| Message-ID | <[email protected]> |
> any advice or help. I have connected a serial TX line to TPU B
> channel 0 and a serial RX line to TPU B channel 1. The other board
> that I am trying to interface with sends out normal RS232 data.
The TPU is logic level not RS232 level so you will need a level
converter such as MAX232. As the other posts indicate, the TPU UART
function is no more difficult to use than any other TPU function.
Regards, Ian
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dN_tlB/TM
--------------------------------------------------------------------~->
-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/MPC500/
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/