MPC8560 MCC interrupts.
"Laxman Bana" <[email protected]>
| Newsgroups | gmane.comp.hardware.motorola.microcontrollers |
|---|---|
| Message-ID | <[email protected]> |
Hi All,
...this is related to Freescale MPC8560 ADS board for MCC interrupts. I
guess I am posting it to the correct user group if not I am sorry for this
noise.
we are having a problem in receiving interrupts in Metrowerks linux
distribution. we are doing MCC for SS7 channel programming and we did pretty
much everything to write data to the device. Before writing we set each
channel BDs to Tx ready and set channel specific parameter ECHAMR to POL
enable. We got the right interrupt for MCC1 which is 36 but we do not see
interrupts incremented in /proc/interrupts for MCC1. The channel is
configured in loop control mode and we never got interrupt for Rx from HW.
If you could tell me how to receive interrupts that would be a great
help...
Thanks in advance
-Laxman Bana
------------------------ Yahoo! Groups Sponsor --------------------~-->
Fair play? Video games influencing politics. Click and talk back!
http://us.click.yahoo.com/T8sf5C/tzNLAA/TtwFAA/dN_tlB/TM
--------------------------------------------------------------------~->
-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/MPC500/
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/