Re: PB555 and C++

Allan,
The whole purpose of my project is to transfer some code from the 
Axiom CME555 board to the Axiom PB555 board. The PB555 doesn't have 
any external memory like the CME555. I understand that C programs 
doesn't take much memory. It's only the C++ libraries that takes up 
the most space. For instance, the MSL C++ library alone takes up 38 
Kbytes but my code only takes up 3 Kbytes. As you can see, almost all 
of the space is taken up by the C++ library and if I do need to 
compile larger projects, the code itself wouldn't take much space. 
Please let me know if you have had any experience in this area and 
feel free to share some advice.

Thanks,
Lei

--- In [email protected], "Dobbin Allan-r11834" 
<Allan.Dobbin@f...> wrote:
>
> I regularly use the stabdard CW libraries running from internal 
SRAM, so
> they can fit but right now I don't have access to my data base to
> determine if I use any specific settings, althought I don't think I 
done
> anyting special.
> 
> I'm not familiar with the board you're using - doesn't it have 
external
> memory? Even if you do fit the standard CW libraries into 26K, 
you'll
> soon run out of space once you start compiling larger projects.
> 
> Regards,
> Allan
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On 
Behalf
> Of coles555
> Sent: Thursday, October 27, 2005 10:18 PM
> To: [email protected]
> Subject: [MPC500] Re: PB555 and C++
> 
> 
> --- In [email protected], "Liechty Ronald-RAT109" <mwron@m...> 
> wrote:
> Hi Ron,
> Thank you so much for taking the time to answer my question. Please 
> correct me if I am wrong but I believe only the MPC556 supports 
code 
> compression. Also, there are two files (MSL_C++.PPCEABI.BARE.H.a 
and 
> MSL_C.PPCEABI.BARE.H.a) for MSL library. Is it okay for me to take 
> out MSL_C.PPCEABI.BARE.H.a file since it is only the C library? I 
> guess what I am trying to ask is if both MSL library files are 
needed?
> 
> Thanks!
> Lei
> 
> 
> > Hello Lei,
> > 
> > One of our engineers said there are 3 possibilities.
> > 
> > 
> > 1) There are some variants of the 5xx chips that support code 
> > compression which if you enable it (please see the documentation)
> there
> > is a post link phase using a tool called Squeezard which will
> compress
> > the code and the chip has the ability to read the compressed code.
> If
> > you don't have one of those chips or if your copy of CW doesn't
> support
> > it, then it won't work for you.
> > 
> > 
> > 2) Starting about a year or 2 ago, CW EPPC started shipping size
> reduced
> > versions of the C libs. These libs have SZ in the name and we only
> ship
> > them prebuilt for certain processors such as e500 for which the 
lib
> is
> > called MSL_C.PPCEABI.bare.SZ.E.a. You can rebuild the H MSL C lib
> with
> > the prefix file ansi_prefix.PPCEABI.bare.SZ.h. You also need to 
use 
> > ansi_prefix.PPCEABI.bare.SZ.h to build your project. Again if your
> copy
> > of CW doesn't have ansi_prefix.PPCEABI.bare.SZ.h, then it won't
> work for
> > you.
> > 
> > 
> > 3) Change the floating point support to none assuming you do not
> need it
> > and use N libs. If you are using cout or printf, those functions 
can 
> > cause some bloat and you can hack at their implementation to only 
> > support the format characters you need.
> > 
> > Ron
> > 
> > --
> > Ron Liechty  
> > Ombudsman Freescale Developer Technology
> > ron.liechty@f... 
> > 
> > coles555 Wrote:
> >  
> > Hi there,
> > I am working with a PB555 board using Codewarrior for development 
> > purposes. Now all the code that I am using are written in C++ and 
> the 
> > Metrowerks Standard C++ Library (MSL_C++.PPCEABI.BARE.H.a and
> > MSL_C.PPCEABI.BARE.H.a) takes up 38 Kbytes of data space. 
However, 
> the 
> > PB555 board has only a mere 26 Kbytes of SRAM. My question is
> whether 
> > or not it is possible to implement C++ code in the PB555 board? If
> so, 
> > how can those C++ Library data fit within SRAM?
> >
> 
> 
> 
> 
> 
> 
> 
> -----------------------------------------------------------
> To learn more about Freescale Microcontrollers, please visit
> http://www.freescale.com/mcu
> 
> 
>  
> Yahoo! Groups Links
>






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dN_tlB/TM
--------------------------------------------------------------------~-> 

-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MPC500/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/