RE: Re: Problems are about the MPC566's CLOCK

I'm glad you found your problem. It sounded like VDDSYN was grounded in
your system. This will cause the system clock to run at 1/2 the crystal
frequency. This is not documented because VDDSYN is supposed to be
powered by 2.6 volts during normal operation.
 

	-----Original Message-----
	From: [email protected] [mailto:[email protected]] On
Behalf Of illtll801021
	Sent: Monday, June 12, 2006 3:23 AM
	To: [email protected]
	Subject: [MPC500] Re: Problems are about the MPC566's CLOCK
	
	

	Thanks for your help.I have found the mistake. VDDSYS should
have 
	connected to 2.6V. This is a careless mistake.

	.___ 



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
You can search right from your browser? It's easy and it's free.  See how.
http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/dN_tlB/TM
--------------------------------------------------------------------~-> 

-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MPC500/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/