Re: statistics show-periodic

I tried that until I was at

    statistics show-periodic

and it still threw that error...


On 22.10.2021 13:34, Timothy Naple wrote:
> Mike,
>
> I am thinking that maybe the issue is in one of the counter names 
> based on the error you are receiving since it is not saying the 
> command is not recognized.
>
> If you run the command without the counters specified (just 
> 'statistics show-periodic') does that work?  If so, there might be 
> something going on with the counter names on that system.
>
> Thank you,
> Tim
>
> ------------------------------------------------------------------------
> *From:* Toasters <[email protected]> on behalf of 
> Sebastian Goetze <[email protected]>
> *Sent:* Friday, October 22, 2021 4:03 AM
> *To:* Potocky Miroslav <[email protected]>; 
> [email protected] <[email protected]>; Mike Thompson 
> <[email protected]>
> *Subject:* Re: statistics show-periodic
>
> Just checked on my 9.7p4 sim:
>
> statistics show-periodic in general seems to be broken. Whatever the 
> counters, whether in Adv or Diag mode it can't find the command and 
> gives the exact error Mike mentioned.
>
> I checked Bugs Online and the only Bug that's show-periodic related was
> https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/1307631 
> <https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/1307631>
>
> (Apparently still in 9.7p10 and fixed in p11)
>
>
> My 2c
>
>
> Sebastian
>
>
> On 22.10.2021 08:40, Potocky Miroslav wrote:
>>
>> Seems to work fine on 9.7P11. Maybe a more recent change?
>>
>> XXXX::> set -privilege advanced
>>
>> Warning: These advanced commands are potentially dangerous; use them 
>> only when directed to do so by NetApp personnel.
>> Do you want to continue? {y|n}: y
>>
>> XXXX::*>  statistics show-periodic -counter 
>> total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
>> XXXX: cluster.cluster: 10/22/2021 08:36:25
>>     total    total     data     data cluster  cluster cluster
>>      recv     sent     recv     sent    busy     recv sent
>>  -------- -------- -------- -------- ------- -------- --------
>>    2.91GB   4.08GB    735MB   2.09GB     51%   2.19GB 1.99GB
>>    3.19GB   4.79GB    836MB   2.34GB     40%   2.37GB 2.44GB
>> XXXX: cluster.cluster: 10/22/2021 08:36:30
>>     total    total     data     data cluster  cluster cluster
>>      recv     sent     recv     sent    busy     recv sent
>>  -------- -------- -------- -------- ------- -------- --------
>> Minimums:
>>    2.91GB   4.08GB    735MB   2.09GB     40%   2.19GB 1.99GB
>> Averages for 2 samples:
>>    3.05GB   4.43GB    786MB   2.22GB     45%   2.28GB 2.22GB
>> Maximums:
>>    3.19GB   4.79GB    836MB   2.34GB     51%   2.37GB 2.44GB
>>
>>
>> XXXX::*> version
>> NetApp Release 9.7P11: Tue Jan 12 23:00:49 UTC 2021
>>
>> Regards,
>> MP
>> On 22. 10. 2021 7:48, Mike Thompson wrote:
>>>
>>> can't seem to get this to work on a 9.7 box. works fine on 9.3
>>>
>>> am I missing something obvious?
>>>
>>> pd-san2::*> set -privilege advanced
>>>
>>> pd-san2::*> statistics show-periodic -counter 
>>> total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
>>>
>>> Error: command failed: entry doesn't exist
>>>
>>> pd-san2::*> set -privilege diag
>>>
>>> Warning: These diagnostic commands are for use by NetApp personnel only.
>>> Do you want to continue? {y|n}: y
>>>
>>> pd-san2::*> statistics show-periodic -counter 
>>> total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
>>>
>>> Error: command failed: entry doesn't exist
>>>
>>> pd-san2::*> version
>>> NetApp Release 9.7P13: Thu Apr 15 02:06:46 UTC 2021
>>>
>>> _______________________________________________
>>> Toasters mailing list
>>> [email protected]  <mailto:[email protected]>
>>> https://www.teaparty.net/mailman/listinfo/toasters  <https://www.teaparty.net/mailman/listinfo/toasters>
>>
>> _______________________________________________
>> Toasters mailing list
>> [email protected]  <mailto:[email protected]>
>> https://www.teaparty.net/mailman/listinfo/toasters  <https://www.teaparty.net/mailman/listinfo/toasters>

_______________________________________________
Toasters mailing list
[email protected]
https://www.teaparty.net/mailman/listinfo/toasters