Re: statistics show-periodic

yeah if you are not in adv or diag, it just says the command is not
recognized. e.g.

pd-san2::> statistics show-periodic

Error: "show-periodic" is not a recognized command

for whatever reason, it was just acting wonky on this cluster the other
day, but works fine now.  strange.



On Fri, Oct 22, 2021 at 5:35 PM Tim McCarthy <[email protected]> wrote:

> If it is not working, make sure you are in advanced mode (prob set
> advanced)
>
> Get Outlook for iOS <https://aka.ms/o0ukef>
> ------------------------------
> *From:* Toasters <[email protected]> on behalf of Mike
> Thompson <[email protected]>
> *Sent:* Friday, October 22, 2021 8:29:18 PM
> *To:* Steve Kirk <[email protected]>
> *Cc:* [email protected] Lists <[email protected]>
> *Subject:* Re: statistics show-periodic
>
> and for completeness, the actual command I was originally having issues
> with, works as well now:
>
> pd-san2::*> statistics show-periodic -counter
> total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
> pd-san2: cluster.cluster: 10/22/2021 17:27:55
>     total    total     data     data cluster  cluster  cluster
>      recv     sent     recv     sent    busy     recv     sent
>  -------- -------- -------- -------- ------- -------- --------
>    75.9KB   24.0KB   50.1KB   1.37KB      0%   22.6KB   22.6KB
>     282KB   28.6KB    258KB   7.21KB      0%   21.4KB   21.4KB
>     479KB    146KB    339KB   8.82KB      0%    137KB    137KB
> pd-san2: cluster.cluster: 10/22/2021 17:28:02
>     total    total     data     data cluster  cluster  cluster
>      recv     sent     recv     sent    busy     recv     sent
>  -------- -------- -------- -------- ------- -------- --------
> Minimums:
>    75.9KB   24.0KB   50.1KB   1.37KB      0%   21.4KB   21.4KB
> Averages for 3 samples:
>     279KB   66.3KB    216KB   5.80KB      0%   60.5KB   60.5KB
> Maximums:
>     479KB    146KB    339KB   8.82KB      0%    137KB    137KB
>
> I dunno.  at least it works now though!
>
>
> On Fri, Oct 22, 2021 at 5:27 PM Mike Thompson <[email protected]>
> wrote:
>
> I tried this again today, and now it magically works.
>
> pd-san2::*> statistics show-periodic
> pd-san2: cluster.cluster: 10/22/2021 17:25:57
>   cpu  cpu    total                     fcache    total    total data
> data     data cluster  cluster  cluster     disk     disk     pkts     pkts
>   avg busy      ops  nfs-ops cifs-ops      ops     recv     sent busy
> recv     sent    busy     recv     sent     read    write     recv     sent
>  ---- ---- -------- -------- -------- -------- -------- -------- ----
> -------- -------- ------- -------- -------- -------- -------- --------
> --------
>    0%   1%       13       13        0        0   71.5KB   17.9KB   0%
> 52.7KB   2.25KB      0%   15.9KB   15.5KB   3.98KB    825KB      218
>  131
>    1%   2%        7        7        0        0    294KB    246KB   0%
> 47.2KB   2.16KB      0%    244KB    244KB   3.69MB   3.23MB      233
>  156
>    0%   1%        0        0        0        0   45.7KB   39.2KB   0%
> 3.03KB      65B      0%   40.0KB   39.1KB   11.9KB       0B      267
>  200
>
> I dunno.  Maybe the filer was having a bad day earlier
>
>
> On Fri, Oct 22, 2021 at 5:56 AM Steve Kirk <[email protected]>
> wrote:
>
> Afternoon,
>
> On Fri, 2021-10-22 at 13:03 +0200, Sebastian Goetze wrote:
> > Seems to work fine on 9.7P11. Maybe a more recent change?
>
> Also works fine for me on 9.7P12 on FAS8200. Could it be hardware
> platform related?
>
> The man page indicates the command is deprecated so perhaps isn't
> getting updated:
>
> >      Note:         This command has been deprecated and may be removed
> > from a future version of Data ONTAP. Use the "statistics show"
> >                    command with the tabular format instead.
> >
>
> Cheers,
> Steve
>
> _______________________________________________
> Toasters mailing list
> [email protected]
> https://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
[email protected]
https://www.teaparty.net/mailman/listinfo/toasters