RE: bringing ARM CPUs into the RCM modules

We’d be potentially be interested in a replacement RCM3000 module.

Cheers,


Ian Lovatt
Embedded Software Engineer
t-mac Technologies


[footer6 copy]


t-mac Technologies Ltd
Stand Park, Sheffield Road, Chesterfield, Derbyshire, S41 8JT

T. +44 (0)844 287 0007                              F. +44 (0)844 287 0006
Technical Support. +44 (0)203 322 3001
E. [email protected]<mailto:[email protected]>                     W. www.t-mac.co.uk<http://www.t-mac.co.uk/>
B. blog.t-mac.co.uk/<http://blog.t-mac.co.uk/>



From: [email protected] [mailto:[email protected]] On Behalf Of basicnode
Sent: 04 January 2013 15:36
To: [email protected]
Subject: [rabbit-semi] bringing ARM CPUs into the RCM modules




We've used Rabbit based modules in the past, but have moved onto ARM CPUs, and have now done a couple of ports of RCM3xxx based modules to ARM CPUs.

We're wondering if there is enough interest out there to do a RCM3xxx pin compatible module with an ARM processor.

While Dynamic C is not ANSI standard, in many cases it's close enough to move code, and in the ARM the RAM paging is not an issue.




________________________________
http://www.t-mac.co.uk/ Monitor, Meter, Manage, Control. BMS & Energy Management.
Telephone: 0844 287 0007  (International +44 (0)1246 233 632)
Support: 0203 322 3001 (International +44 (0) 203 322 3001 )
Fax: 0844 287 0006 (International +44 (0)1246 201193)

Please consider the environment before printing this email message.

E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. t-mac Technologies therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.

t-mac Technologies Ltd. Registered in England. Company No 5254756. Stand Park. Sheffield Road. Chesterfield. S41 8JT.