RE: Re: Serial Flash AT45DBxx1E as boot flash doesn't work

"'Tom Collins' tom-lnEA/wrDJtNWk0Htik3J/[email protected] [rabbit-semi]" <[email protected]> Wed, 25 Nov 2015 12:23:54 -0800

Newsgroups	gmane.comp.hardware.rabbit-semiconductor
Message-ID	<[email protected]>

Antonio,

 

Digi is migrating to that part on new revisions of their hardware, and released a patch back in May for both DC 9 and DC 10 which adds compatibility for the new flash part.

 

Here’s the Knowledge Base article regarding the change: http://knowledge.digi.com/articles/Knowledge_Base_Article/Serial-Flash-End-Of-Life-Patch-Support

 

And a direct link to the patch for DC 9.62 and 10.72: http://ftp1.digi.com/support/documentation/40002882_A.zip

 

If you’re using any core modules or SBCs with serial flash parts, you might want to install that patch now so any binaries you compile will be compatible with new hardware once it ships.

 

-Tom

 

From: [email protected] [mailto:[email protected]] 
Sent: Wednesday, November 25, 2015 2:16 AM
To: [email protected]
Subject: [rabbit-semi] Re: Serial Flash AT45DBxx1E as boot flash doesn't work

 

  

After long tests we have NOT found a solution !
Someone can help ?