Re: SNMP

Hi Tom,

Thanks for your advice. I have early version DC10.64 and SNMP running
normally.
OK i will download DC10.72.
Stev.

On Thu, Nov 26, 2015 at 3:29 AM, 'Tom Collins' tom-lnEA/wrDJtNWk0Htik3J/[email protected]
[rabbit-semi] <[email protected]> wrote:

>
>
> Stev,
>
>
>
> I haven’t done much with SNMP recently, but you might want to try using DC
> 10.72 first, in case there were any SNMP issues fixed in that release.
>
>
>
> There’s also a patch out to address two issues in SNMP.LIB:
> https://github.com/digidotcom/DCRabbit_10/commit/4c649363773f284290f28d694095aea508403bf5
>
>
>
> The commit message says, “bugfix: [DC-130] SNMP: Correctly store
> zero-length octet strings and prevent xmem window wraparound (in all data
> formats).”.
>
>
>
> If you continue to have problems, you might want to run a packet capture
> tool like Wireshark to see if the UDP messages are reaching the PC, and
> also check the Windows firewall settings to ensure the app is allowed to
> receive those messages.
>
>
>
> -Tom
>
>
>
> *From:* [email protected] [mailto:[email protected]]
> *Sent:* Monday, November 23, 2015 11:18 PM
> *To:* [email protected]
> *Subject:* [rabbit-semi] SNMP
>
>
>
>
>
> Dear all,
>
>
>
> I have problem can't send snmp trap. I use RCM4200 and DC10.66. I am
> running sample software SNMP1.C and use iReasoning MIB Browser to detect
> SNMP Trap. On SNMP1.C, define SEND_TRAP already set and MANAGER_IP set to
> my computer but no trap sending.
>
> Can anyone help me, maybe need special setting.
>
> Thank you for helping.
>
> Stev
>
> 
>