Targetless data retained for this project differs from tcdata.ini entry.

This starts to annoy me...
 Every time I'm starting the DC 10.72 I get the following dialog message. From the message it seems that tcdata.ini is wrong (Base Frequency: 0) although I looked at it and it does contain "25.0000" for that entry.
 

 Anyone experiencing this?
 I'm using it in a Win7 32bit
 

 It's true that selecting either Yes or No doesn't seem to have eny effect, and everything is working ok after that, but still...
 

 

 ---------------------------
 Board Type 0x3400
 ---------------------------
 Targetless data retained for this project differs from tcdata.ini entry.
 

 

   Project:
 

     Board Type: 0x3400
 

     CPU ID: 1024
 

     RAM: 1024
 

     Primary Flash: 1024
 

     Base Frequency: 25000000
 

     Description: 162MHz, RCM6700, 1M+32K RAM, 1M serial program flash  
 

     Macros: CLK_DBL=0;BRD_OPT0=0x22;SBF=1;MD0=0x1;MD0_ID=0x1F24;MD0_TYPE=0x2;MD0_SIZE=0x100;MD0_SECSIZE=0x108;MD0_SECNUM=0x1000;MD0_SPEED=0x0;MD0_MBC=0x0;MD2=0x1;MD2_ID=0x0;MD2_TYPE=0x0;MD2_SIZE=0x100;MD2_SECSIZE=0x0;MD2_SECNUM=0x0;MD2_SPEED=0x0;MD2_MBC=0xC3;MD3=0x1;MD3_ID=0x0;MD3_TYPE=0x0;MD3_SIZE=0x8;MD3_SECSIZE=0x0;MD3_SECNUM=0x0;MD3_SPEED=0x0;MD3_MBC=0xC7  
 

 

 

   tcdata.ini:
 

     Board Type: 0x3400
 

     CPU ID: 1024 (Rabbit 6000 revision FZD0AA064AA)
 

     RAM: 1024
 

     Primary Flash: 1024
 

     Base Frequency: 0
 

     Description: 162MHz, RCM6700, 1M+32K RAM, 1M serial program flash  
 

     Macros: CLK_DBL=0;BRD_OPT0=0x22;SBF=1;MD0=0x1;MD0_ID=0x1F24;MD0_TYPE=0x2;MD0_SIZE=0x100;MD0_SECSIZE=0x108;MD0_SECNUM=0x1000;MD0_SPEED=0x0;MD0_MBC=0x0;MD2=0x1;MD2_ID=0x0;MD2_TYPE=0x0;MD2_SIZE=0x100;MD2_SECSIZE=0x0;MD2_SECNUM=0x0;MD2_SPEED=0x0;MD2_MBC=0xC3;MD3=0x1;MD3_ID=0x0;MD3_TYPE=0x0;MD3_SIZE=0x8;MD3_SECSIZE=0x0;MD3_SECNUM=0x0;MD3_SPEED=0x0;MD3_MBC=0xC7  
 

 

 

 Update project data from tcdata.ini?
 

 

 ---------------------------
 Yes   No   
 
 ---------------------------