RE: Updated version of MusicJukebox (v1.0.2) released

Good point about the non-programmers out there.

Here are more details:

1) telnet to the HD1000's IP address (eg. 10.10.10.2)...  Replace 10.10.10.2 
with the IP address found on the top of the screen in the HD1000's Setup 
screen.

telnet 10.10.10.2

2) place a Compact Flash card into the HD1000

3) mount the CF card so that we can write to it

mount /dev/ide/host0/bus0/target0/lun0/part1 /mnt/flash1 -o remount,rw,sync

4) create a 64Mb file on the CF card

dd if=/dev/zero of=/mnt/flash1/sdk.swapfile bs=1024 count=65536

5) make that file a swap file

mkswap /mnt/flash1/sdk.swapfile

6) turn on the swapfile

swapon /mnt/flash1/sdk.swapfile


Next time you reboot the HD1000, you need to do the following steps: 1, 2, 
3, 6

I hope this helps.


>From: "Jeff Curtin" <[email protected]>
>Reply-To: Roku Tech Mail List and Discussion 
>Group<[email protected]>
>To: "'Roku Tech Mail List and Discussion Group'" 
><[email protected]>
>Subject: RE: [Roku-tech] Updated version of MusicJukebox (v1.0.2) released
>Date: Sat, 29 May 2004 23:54:43 -0400
>
>Roy,
>
>For us non programmers can you walk us through setting up the swap
>file>>>>>> Thanks in advance>
>
>Jeff
>
>I know you have instructions on your site but some of us have never used
>Telnet before.
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Roy Pereira
>Sent: Saturday, May 29, 2004 11:18 PM
>To: [email protected]
>Subject: [Roku-tech] Updated version of MusicJukebox (v1.0.2) released
>
>I've updated MusicJukebox on http://portlover.com/jukebox.roku/.
>
>The new version adds the following:
>
>-Playlists (M3U, PLS, RMP, ASX, B4S)
>-Auto Playlists (rule-based dynamic playlists)
>-MP3's without any ID3 tag will now be loaded with their song title set to
>  their filename
>-Much faster scanning of music files!!
>
>You can download it at http://portlover.com/jukebox.roku/jukebox.roku.zip
>
>For those of you trying MusicJukebox with your thousands of MP3s, please 
>use
>a
>swapfile or the HD1000 will run out of memory and crash.
>
>_______________________________________________
>Roku-tech mailing list
>[email protected]
>http://lists.rokulabs.com/mailman/listinfo/roku-tech
>
>_______________________________________________
>Roku-tech mailing list
>[email protected]
>http://lists.rokulabs.com/mailman/listinfo/roku-tech