Re: RE: HOWTO cross-compile environment ???

A new version of the cross-compile howto is available at: 
http://home.planet.nl/~jpsaman.


Weichun YANG wrote:

>hi
> I am galde to read this in newslist roku-tech.
>  
>
Thank you !

> I have readed how Hacking the Roku HD1000 in the site
>http://home.planet.nl/~jpsaman/, but I have some trouble when I started
>Step 1: Cross-compiler
>Step 7: Cross-development environment
>
>at step 1, I got two file "rokutools-20020423-1.i386.rpm and
>rokutools-mipsel-20020423-1.i386.rpm" aftre I used RPM --rebuild.
> I want to know How I use the two files at step7.
>  
>
They are described now.

>and at step 7, I would work in telnet ROKU consol , or in my PC linux consol
>?
>
>  
>
At step 7 you are setting up a cross-compile environment on your 
workstation.

>there is a "tart -xvf /mnt/flash/roku.tar", whether I would extract roku.tar
>in CF card (/mnt/flash1/ )?
>
>  
>
No, you would do that in your cross-compile environment on your workstation.

>and in the site there is two link
># roku-mount-sdk.sh - Mount the SDK environment in your cross-development
>tree.
># roku-umount-sdk.sh - Unmount the SDK environment from your
>cross-development tree.
>in which they are a same file "roku-mount-sdk.sh".
>
>  
>
The link has been corrected.

-- 

Many greetings,
Jean-Paul Saman

Consultant
--------------------------------------------------------------
VLC iPAQ maintainer                    http://www.videolan.org
RedHat Certified Engineer         RHCE number: 807202745005548
--------------------------------------------------------------