Re: Newcomer unable to compile a very simple program in ubuntu 13.04.

Hi,
The Linker is looking for the ldscript file memory.x in your system and
cannot find it.. try to find it manually in your mspgcc installation folder
smth. like this folder

msp430\lib\ldscripts.. there should be this ld script file.. and try
to give the phad to your script in compiler options with option -T

-T scriptfile
       --script=scriptfile
           Use scriptfile as the linker script.  This script replaces ld’s
           default linker script (rather than adding to it), so commandfile
           must specify everything necessary to describe the output file.
           If scriptfile does not exist in the current directory, "ld" looks
           for it in the directories specified by any preceding -L options.

Hope it helps,

Regards



On Fri, Aug 9, 2013 at 1:21 PM, Sigmatec Automação e Sistemas <
[email protected]> wrote:

>
> Hello,
>
> I'm just starting to explore this platform and am unable to solve a
> configuration issue (I guess) in the first program I try, very simple,
> below. The set I use is the MSP430 Ultra-Low-Power MCUs eZ430-F2013
> Development Tool with ubuntu v13.04. The installed MSP430 toolchain is
> the default one from its apt-get command.
> include "msp430x22x4.h"
>
> volatile unsigned int i; // volatile to prevent optimization
>
> void main(void)
> {
> WDTCTL = WDTPW + WDTHOLD; // stop watchdog timer
> P1DIR |= 0X01; // set P1.0 to output direction
>
> for(;;) {
> P1OUT ^= 0x01; // toogle P1.0 exclusive-OR
> i = 50000; // delay
> do (i--);
> while (i != 0);
> }
> }
>
> When I try to compile it under ubuntu 13.04 I receive the error message
> below,
>
> sigmatech@sigmatech:~/Desktop/ESL/code/MSP430$ msp430-gcc hello_word.c
> /usr/lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: cannot open linker
> script file memory.x: No such file or directory
> collect2: ld returned 1 exit
> status/usr/lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: cannot open
> linker script file memory.x: No such file or directory
> collect2: ld returned 1 exit status
>
> Could anyone help please?
>
> TIA
>
> Sigmatech
> PS - is there an emacs mode available?
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite!
> It's a free troubleshooting tool designed for production.
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
> _______________________________________________
> Mspgcc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
>

------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead. 
Download for free and get started troubleshooting in minutes. 
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk

_______________________________________________
Mspgcc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mspgcc-users