Re: Mspdebug: "prog" programs vectors, not program code

I see, years ago, I have used a similar "funclets" method on 68HC11.
So, gaps in TCK should not be a problem.

BTW, I also noticed that the supply from the LPT FET box is on the low side
for flashing (2.8V, 2.7 is the minimum required), so I connected an external
3.3V supply, but no difference.
The problem is 100% repeatable, 0xffe0 always gets written, 0x1100 never, as
far as I have tried.

I have a bunch of f149's and some olimex header boards with them, so I'll
just buy the Olimex box.

Thanks for the info,
Marko



--
View this message in context: http://msp430-gcc-users.1086195.n5.nabble.com/Mspdebug-prog-programs-vectors-not-program-code-tp7409p7449.html
Sent from the MSP430 gcc - Users mailing list archive at Nabble.com.

------------------------------------------------------------------------------