Re: Are there any differences between connecting Samba Servers or Windows Servers

Zitat von Andrew Watkins <[email protected]>:

> On 04/25/16 16:50, Andrew Watkins wrote:
>>
>> Hopefully my last question.
>>
>> I have connected to a Samba server but have had no luck connecting  
>> to a Windows Server 2008 R2 Enterprise 6.1.
>>
>> Configuration:
>> $backends['smbi']['disabled'] = true;
>> $backends['smbi']['name'] = 'I drive';
>> $backends['smbi']['driver'] = 'smb';
>> $backends['smbi']['hordeauth'] = true;
>> $backends['smbi']['params']['hostspec'] = 'win2008';
>> $backends['smbi']['params']['domain'] = 'dcsnt';
>> $backends['smbi']['params']['port'] = 139;
>> $backends['smbi']['params']['share'] = 'sdata';
>> $backends['smbi']['params']['smbclient'] = '/usr/bin/smbclient';
>> $backends['smbi']['loginparams'] = array();
>> $backends['smbi']['shares'] = true;
>>
>> If I change host name to a samba system it works:
>>
>> SAMBA setup:
>> % /usr/bin/smbclient -L SambaServer -U andrew
>> Enter andrew's password:
>> Domain=[DCSNT] OS=[Unix] Server=[Samba 3.6]
>>
>>        Sharename       Type      Comment
>>        ---------       ----      -------
>>        andrew          Disk      Home Directories
>> Domain=[DCSNT] OS=[Unix] Server=[Samba 3.6.25]
>>
>>        Server               Comment
>>        ---------            -------
>>
>>        Workgroup            Master
>>        ---------            -------
>>        DCSNT                xxxx
>>
>>
>> Windows Server information:
>>
>> % /usr/bin/smbclient -L w2008 -U andrew
>> Enter andrew's password:
>> Domain=[DCSNT] OS=[Windows Server 2008 R2 Enterprise 7601 Service  
>> Pack 1] Server=[Windows Server 2008 R2 Enterprise 6.1]
>>
>>        Sharename       Type      Comment
>>        ---------       ----      -------
>>        sdata           Disk
>> Connection to bloomsburyfs failed (Error NT_STATUS_UNSUCCESSFUL)
>> NetBIOS over TCP disabled -- no workgroup available
>>
>> As you can tell smbclient does not end nicely so it could be that.
>>
>> Thought I would ask before I look into more.
>>
>> Thanks
>>
>>
>
> No luck so far, but it looks like smbclient has no problem accessing  
> the Windows share, so guess I need to look at PHP or horde
>
> # smbclient //pc-aw1/utils -U wstudent%password
> Domain=[DCSNT] OS=[Windows 7 Enterprise N 7601 Service Pack 1]  
> Server=[Windows 7 Enterprise N 6.1]
> smb: \> ls
>   .                                   D        0  Mon Jan 18 15:29:41 2016
>   ..                                  D        0  Mon Jan 18 15:29:41 2016
>   MyCode                              D        0  Tue Feb 2 13:03:42 2016
>   PQuota2                             D        0  Wed Jan 27 13:52:44 2016
>   tvnjviewer                          D        0  Wed Jan 6 15:19:31 2016
>
>                 59604 blocks of size 8388608. 44087 blocks available
> smb: \> pwd
> Current directory is \\pc-aw1\utils\
>
>
> # smbclient -L //pc-aw1 -U wstudent%password
> Domain=[DCSNT] OS=[Windows 7 Enterprise N 7601 Service Pack 1]  
> Server=[Windows 7 Enterprise N 6.1]
>
>         Sharename       Type      Comment
>         ---------       ----      -------
>         ADMIN$          Disk      Remote Admin
>         C$              Disk      Default share
>         IPC$            IPC       Remote IPC
>         Utils           Disk
> Connection to pc-aw1 failed (Error NT_STATUS_CONNECTION_REFUSED)
> NetBIOS over TCP disabled -- no workgroup available

It still returns an error, that's probably catched by the Smb driver  
for Gollem.

-- 
Jan Schneider
The Horde Project
http://www.horde.org/

-- 
gollem mailing list
Frequently Asked Questions: http://wiki.horde.org/FAQ
To unsubscribe, mail: [email protected]