Re: Trouble viewing a specific email in Imp

Quoting Jan Schneider <[email protected]>:

> Zitat von John H. Bennett III <[email protected]>:
>
>> Quoting "John H. Bennett III" <[email protected]>:
>>
>>> Quoting Jan Schneider <[email protected]>:
>>>
>>>> Zitat von John H. Bennett III <[email protected]>:
>>>>
>>>>> Hello all,
>>>>>
>>>>> I am having an issue viewing all of the content in a particular  
>>>>> email.  I sent info offlist, as the email had some personal  
>>>>> stuff in it, but the email was viewed fine, so I'm asking the  
>>>>> larger list for any assistance.
>>>>>
>>>>> The email has some text that is not being displayed in horde,  
>>>>> but is showing up on my mobile device.  When I go to open the  
>>>>> email in horde+, I see these errors in my log, which I didn't  
>>>>> bother to check earlier.
>>>>>
>>>>> Oct  10 18:52:59 www HORDE: [imp] Error running command:  
>>>>> /usr/bin/identify -format "%n" /tmp/imgPysnjx Error:  
>>>>> /invalidaccess in --run-- Operand stack:    --dict:9/18(L)--    
>>>>> F2   78.591   --dict:6/6(L)--   --dict:6/6(L)--    
>>>>> ArialNarrow-Italic   --dict:11/12(ro)(G)--   --nostringval--    
>>>>> CIDFontObject   --dict:6/6(L)--   --dict:6/6(L)--   59231    
>>>>> --dict:6/6(L)--   --nostringval--   PDFCIDFontName    
>>>>> ArialNarrow-Italic Execution stack:    %interp_exit   .runexec2   
>>>>>  --nostringval--   --nostringval--   --nostringval--   2    
>>>>> %stopped_push   --nostringval--   --nostringval--    
>>>>> --nostringval--   false   1   %stopped_push   1862   1   3    
>>>>> %oparray_pop   1861   1   3   %oparray_pop   1845   1   3    
>>>>> %oparray_pop   --nostringval--   --nostringval--   2   1   1    
>>>>> --nostringval--   %for_pos_int_continue   --nostringval--    
>>>>> --nostringval--   --nostringval--   --nostringval--    
>>>>> %array_continue   --nostringval--   false   1   %stopped_push    
>>>>> --nostringval--   %loop_continue   --nostringval--    
>>>>> --nostringval--   --nostringval--   --nostringval--    
>>>>> --nostringval--   --nostringval--   %array_continue    
>>>>> --nostringval--   --nostringval--   --nostringval--    
>>>>> --nostringval--   --nostringval-- Dictionary stack:     
>>>>> --dict:1154/1684(ro)(G)--   --dict:1/20(G)--    
>>>>> --dict:75/200(L)--   --dict:75/200(L)--    
>>>>> --dict:106/127(ro)(G)--   --dict:286/300(ro)(G)--    
>>>>> --dict:22/25(L)--   --dict:4/6(L)--   --dict:22/40(L)--    
>>>>> --dict:1/1(ro)(G)-- Current allocation mode is local [pid 20530  
>>>>> on line 814 of "/usr/share/pear/Horde/Image/Im.php"]
>>>>
>>>> This is probably just from creating an attachment preview. The  
>>>> body of the message should still render just fine.
>>>>
>>> Yes sir, I understand that is should render just fine, but it  
>>> isn't for me using edge, chrome, FF, and that is what I am needing  
>>> assistance with.  Mike showed it did on his system, so I'm hopeful  
>>> that it's simply a matter of me having something misconfigured.   
>>> What else could I look at?  mime_driver settings are where I plan  
>>> to start next when I'm able to get back to looking into this.
>>>
>>>
>>>>> Looking at the headers, I see these content-types
>>>>>
>>>>> Content-Type: multipart/mixed; boundary="001a114e27f69963c9055ae41f12"
>>>>>
>>>>> --001a114e27f69963c9055ae41f12
>>>>> Content-Type: multipart/related; boundary="001a114e27f69963c7055ae41f11"
>>>>>
>>>>> --001a114e27f69963c7055ae41f11
>>>>> Content-Type: multipart/alternative;  
>>>>> boundary="001a114e27f69963c3055ae41f10"
>>>>>
>>>>> --001a114e27f69963c3055ae41f10
>>>>> Content-Type: text/plain; charset="UTF-8"
>>>>> Content-Transfer-Encoding: quoted-printable
>>>>>
>>>>>
>>>>> My horde5 installation is up to date. I have this configured in  
>>>>> horde, conf.php
>>>>>
>>>>> $conf['image']['convert'] = '/usr/bin/convert';
>>>>> $conf['image']['identify'] = '/usr/bin/identify';
>>>>> $conf['image']['driver'] = 'Im';
>>>>>
>>>>> I'm running a distro based on CentOS 6.
>>>>>
>>>>> PHP 5.3.3 (cli) (built: Mar 22 2017 12:27:09)
>>>>> Copyright (c) 1997-2010 The PHP Group
>>>>> Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies
>>>>>
>>>>>
>>>>> I have this installed, ImageMagick-6.7.2.7-6.el6.x86_64
>>>>>
>>>>> I see on the config page that the pecl version is the preferred  
>>>>> on to use, but it requires at least php 5.4, and I'm not in a  
>>>>> position to try to upgrade php on this system.
>>>>>
>>>>> [root@www RPMS]# pecl install imagick
>>>>> pecl/imagick requires PHP (version >= 5.4.0), installed version is 5.3.3
>>>>>
>>>>> I would appreciate any help.
>>>>>
>>>>> I will try setting this up on CentOS7, and see if the problem  
>>>>> clears, and if so, then know that I need to get there, so I have  
>>>>> more current packages installed.
>>>>>
>>>>> Thank you in advanced,
>>>>>
>>>>> John
>>>>
>>>>
>>>>
>>>> -- 
>>>> Jan Schneider
>>>> The Horde Project
>>>> https://www.horde.org/
>>>>
>>>> -- 
>>>> imp mailing list
>>>> Frequently Asked Questions: http://wiki.horde.org/FAQ
>>>> To unsubscribe, mail: [email protected]
>>>
>>> Thank you again,
>>>
>>> John
>>
>> Finally had a chance to look at this more.  In my  
>> imp/config/mime_drivers.local.php file I have
>> $mime_drivers['html']['inline'] = true;.  If I change that to  
>> false, then I can see the text of the email that I reported having  
>> problems viewing in imp, that displays fine on my mobile device.   
>> But, that presents another issue in that html email now can't be  
>> viewed, because of the changed setting.
>>
>> On some emails, I get the below message.
>>
>> This message part contains HTML data, but inline HTML display is disabled.
>> View HTML data in new window.
>> Convert HTML data to plain text and view in new window.
>>
>> Others I get the text piece, and if they offer a link to view in  
>> browser, I can do that, or I can click on all parts in imp, then  
>> view the HTML.
>>
>> Not really what I want, but that seems to be how horde works, in at  
>> least what I am seeing and trying.
>>
>> I setup OL2013, and the latest thunderbird client, and all mail  
>> items display as I think they should.  The mail I was having an  
>> issue with also has background stationary, and an image in the  
>> signature line, and those also display fine on these 2 clients, but  
>> doesn't in imp.
>>
>> So, it looks like I will need to make a decision on what to do.   
>> Either stay with using imp, and know that in some cases, I'm going  
>> to have to look at all parts in order to see the entire email  
>> contents, minus the possible signature and backgrounds, or not use  
>> imp, switch clients, and train others how to use that particular  
>> client.
>>
>> I'm not knocking imp because I have been using it since since horde  
>> 3, so if I have stated something wrong in how I am seeing and  
>> interpreting horde's behavior, I'll be happy to test/verify some  
>> other settings that may lead to a better solution.
>>
>> I also have a git install of horde, and did a git pull and it  
>> updated a lot of items, and the testing/results are the same with  
>> that version.
>>
>> Again, any additional things to look at are appreciated and welcomed.
>>
>> Thank you,
>>
>> John
>
> Do you have the tidy PHP extension installed?

No, I didn't.  I have now installed php-tidy and libtidy to a test  
server, but that didn't change anything, and I also didn't see that  
there was any specific configuration settings needed for this.

>
> -- 
> Jan Schneider
> The Horde Project
> https://www.horde.org/
>
> -- 
> imp mailing list
> Frequently Asked Questions: http://wiki.horde.org/FAQ
> To unsubscribe, mail: [email protected]

Thank you,

John

-- 
imp mailing list
Frequently Asked Questions: http://wiki.horde.org/FAQ
To unsubscribe, mail: [email protected]