Re: problem while building cruise control

Hi Again,

So I just went through the steps described here:
http://cruisecontrol.sourceforge.net/gettingstartedsourcedist.html
using CruiseControl 2.8.4 on Ubuntu linux and didn't have any problems.

I re-read your email and it is not clear to me what the exact errors 
where: You mention an error building 'main', yet the error you post 
comes from 'reporting/jsp'.

Is it possible you did not build 'main' first? The order is important, 
you must build 'main' before building 'reporting/jsp' or 
'reporting/dashboard'.

Dan



On 05/23/2011 07:34 PM, Dan Rollo wrote:
>
> Hi,
>
> I know our CI build of CruiseControl itself does not actually exercise
> those build steps from the 'src' jar mentioned here:
> http://cruisecontrol.sourceforge.net/gettingstartedsourcedist.html
> That is probably why these instructions have become out dated.
>
> We should either fix the docs (and/or steps), or we should change the
> docs to suggest building the source from subversion.
>
>
> If you want to build from source, I would suggest you first try checking
> out the project from subversion (see:
> http://cruisecontrol.sourceforge.net/svn.html), and try running either
> the release.bat/.sh or 'ant' from the root directory (eg: from the
> parent directory containing main and reporting, etc).
> If these work, that verifies a baseline for you environment. From there,
> we can work on fixing the build steps if desired.
>
> (I've always been a little unsure that trying to build from the bundled
> 'src' file has any advantage over building from the subversion checkout.)
>
> Dan
>
>
>
> From: "Bal Krishna Shrestha" <[email protected]>
> Subject: [Cruisecontrol-user] problem while building cruise control
> To: <[email protected]>
>
> Hi,
>
> Warm Greetings to you all.
>
>
>
> In my system I have following package install for cruisecontrol
>
>
>
> OS - CentOS 5.5
>
> Php - php5.3.6 (source distribution)
>
> Mysql - mysql-5.0.77 (installed with yum)
>
> Apache - httpd-2.2.3 (installed with yum)
>
> Jdk - java version "1.6.0_25" (download java_ee_sdk-6u2-jdk-linux.sh
> from sun java)
>
> Ant -ant-1.8.0 (Apache Ant version 1.8.0 bin file)
>
> Junit -junit-3.8.2-3jpp.1 (junit install with yum)
>
> Cruisecontrol - cruisecontrol-2.7.1 (src, using src file b/c bin files
> only work with sample file connectfour as it is mention in site as -- This
> Binary Distribution is a trimmed down version of the Source
> Distribution. It
> is fully functional and intended to work with a sample project - the game
> Connect Four - "out of the box". Site :
> http://cruisecontrol.sourceforge.net/gettingstartedbindist.html)
>
>
>
>
>
>
>
> Following is steps I did to build ant with cruisecontrol
>
>
>
> I used latest version (2.8.4) cruise control but it give error when build
> ant in INSTALL_DIR/main . just run 'ant' command in INSTALL_DIR/main it
> give
> error
>
> Following the last lines with build failed while building ant with cruise
> control
>
>
>
> jsp-precompile:
>
> [mkdir] Created dir:
> /opt/cruisecontrol-2.8.4/reporting/jsp/target/jsp-precompile/exploded-war
>
> [unzip] Expanding:
> /opt/cruisecontrol-2.8.4/reporting/jsp/dist/cruisecontrol.war into
> /opt/cruisecontrol-2.8.4/reporting/jsp/target/jsp-precompile/exploded-war
>
> [mkdir] Created dir:
> /opt/cruisecontrol-2.8.4/reporting/jsp/target/jsp-precompile/src
>
>
>
> BUILD FAILED
>
> /opt/cruisecontrol-2.8.4/build.xml:39: The following error occurred while
> executing this line:
>
> /opt/cruisecontrol-2.8.4/reporting/jsp/build.xml:206: jasper2 doesn't
> support the "listerrors" attribute
>
>
>
>
>
> Moving lower version and building cruisecontrol
>
>
>
> 1. Then I moved to lower version 2.7.1 , ant successfully build with
> cruisecontrol in INSTALL_DIR/main,
>
> Following the last lines with build failed while building ant with cruise
> control
>
>
>
> jar:
>
> [jar] Building jar: /opt/cc/main/dist/cruisecontrol.jar
>
> [jar] Building jar: /opt/cc/main/dist/cruisecontrol-launcher.jar
>
> [jar] Building jar:
> /opt/cc/main/dist/cruisecontrol-antprogresslogger.jar
>
>
>
> all:
>
>
>
> clean-all:
>
>
>
> BUILD SUCCESSFUL
>
> Total time: 55 seconds
>
>
>
>
>
>
>
>
>
>
>
> 2. After this build ant with cruisecontrol in
> INSTALL_DIR/reporting/jsp/ it give error
>
>
>
> While building I give following input as it asked for input path for
> directory
>
>
>
> -set.log.dir:
>
> [input] WARNING! Property user.log.dir not set! Please enter the
> absolute path to the CruiseControl logs directory:
>
> /var/logs/cruisecontrol/
>
>
>
>
>
> -set.status.file:
>
> [input] WARNING! Property user.build.status.file not set! Please enter
> the name of the current build status file:
>
> /opt/cc/reporting/jsp/webcontent/WEB-INF/web.xml
>
>
>
>
> -set.artifacts.dir:
>
> [input] WARNING! Property cruise.build.artifacts.dir not set! Please
> enter the absolute path to the directory where additional build artifacts
> are stored:
>
> /opt/cc/reporting/dashboard/test/data/arbitrary_artifacts/artifacts/
>
>
>
>
>
> After this it show following build message
>
>
>
> jsp-precompile:
>
> [mkdir] Created dir:
> /opt/cc/reporting/jsp/target/jsp-precompile/exploded-war
>
> [unzip] Expanding: /opt/cc/reporting/jsp/dist/cruisecontrol.war into
> /opt/cc/reporting/jsp/target/jsp-precompile/exploded-war
>
> [mkdir] Created dir: /opt/cc/reporting/jsp/target/jsp-precompile/src
>
>
>
> BUILD FAILED
>
> /opt/cc/reporting/jsp/build.xml:236: jasper2 doesn't support the
> "listerrors" attribute
>
>
>
> Then I disable the line of listerrors in file jsp/build.xml as commenting
> following lines
>
>
>
> <jasper2 compile="true" outputdir="${basedir}/target/jsp-precompile/src"
>
> listerrors="false" validatexml="true" verbose="2"
>
> uriroot="${basedir}/target/jsp-precompile/exploded-war"/>
>
>
>
>
>
> again I build with command "ant"
>
> with same input as above while building.
>
>
>
> Following the last lines with build failed while building ant with cruise
> control
>
>
>
>
>
> jsp-precompile:
>
> [mkdir] Created dir:
> /opt/cc/reporting/jsp/target/jsp-precompile/exploded-war
>
> [unzip] Expanding: /opt/cc/reporting/jsp/dist/cruisecontrol.war into
> /opt/cc/reporting/jsp/target/jsp-precompile/exploded-war
>
> [mkdir] Created dir: /opt/cc/reporting/jsp/target/jsp-precompile/src
>
>
>
> all:
>
>
>
> clean-all:
>
>
>
> BUILD SUCCESSFUL
>
> Total time: 1 minute 4 seconds
>
>
>
>
>
>
>
>
>
> 3. Now build ant in INSTALL_DIR/reporting/dashboard directory
>
> Build fail with following last lines message
>
>
>
>
>
>
>
> -unit-tests:
>
> [mkdir] Created dir: /opt/cc/reporting/dashboard/target/reports
>
> [mkdir] Created dir:
> /opt/cc/reporting/dashboard/target/classes/test/build
>
> [junit] WARNING: multiple versions of ant detected in path for junit
>
> [junit]
> jar:file:/opt/ant/lib/ant.jar!/org/apache/tools/ant/Project.class
>
> [junit] and
> jar:file:/opt/cc/reporting/dashboard/lib/ant.jar!/org/apache/tools/ant/Proje
>
> ct.class
>
> [junit] Running net.sourceforge.cruisecontrol.dashboard.BuildDetailTest
>
> [junit] Testsuite:
> net.sourceforge.cruisecontrol.dashboard.BuildDetailTest
>
> [junit] Tests run: 9, Failures: 1, Errors: 0, Time elapsed: 0.425 sec
>
> [junit] Tests run: 9, Failures: 1, Errors: 0, Time elapsed: 0.425 sec
>
> [junit]
>
> [junit] Testcase:
> testShouldGetArtifactsInSubDirectories(net.sourceforge.cruisecontrol.dashboa
>
> rd.BuildDetailTest): FAILED
>
> [junit] expected:<4> but was:<0>
>
> [junit] junit.framework.AssertionFailedError: expected:<4> but was:<0>
>
> [junit] at
> net.sourceforge.cruisecontrol.dashboard.BuildDetailTest.testShouldGetArtifac
>
> tsInSubDirectories(BuildDetailTest.java:178)
>
> [junit]
>
> [junit]
>
>
>
> BUILD FAILED
>
> /opt/cc/reporting/dashboard/build.xml:160: Tests failed
>
>
>
>
>
>
>
> Then I changed the values 4 to 0 in line "assertEquals(4,
> artifactNames.size());" of class "testShouldGetArtifactsInSubDirectories"
> in file
> test/unit/net/sourceforge/cruisecontrol/dashboard/BuildDetailTest.java
>
>
>
> After changing the value from 4 to 0 it give following build fail error
>
>
>
>
>
> -unit-tests:
>
> [mkdir] Created dir: /opt/cc/reporting/dashboard/target/reports
>
> [mkdir] Created dir:
> /opt/cc/reporting/dashboard/target/classes/test/build
>
> [junit] WARNING: multiple versions of ant detected in path for junit
>
> [junit]
> jar:file:/opt/ant/lib/ant.jar!/org/apache/tools/ant/Project.class
>
> [junit] and
> jar:file:/opt/cc/reporting/dashboard/lib/ant.jar!/org/apache/tools/ant/Proje
>
> ct.class
>
> [junit] Running net.sourceforge.cruisecontrol.dashboard.BuildDetailTest
>
> [junit] Testsuite:
> net.sourceforge.cruisecontrol.dashboard.BuildDetailTest
>
> [junit] Tests run: 9, Failures: 1, Errors: 0, Time elapsed: 0.524 sec
>
> [junit] Tests run: 9, Failures: 1, Errors: 0, Time elapsed: 0.524 sec
>
> [junit]
>
> [junit] Testcase:
> testShouldGetArtifactsInSubDirectories(net.sourceforge.cruisecontrol.dashboa
>
> rd.BuildDetailTest): FAILED
>
> [junit] null
>
> [junit] junit.framework.AssertionFailedError
>
> [junit] at
> net.sourceforge.cruisecontrol.dashboard.BuildDetailTest.testShouldGetArtifac
>
> tsInSubDirectories(BuildDetailTest.java:179)
>
> [junit]
>
> [junit]
>
>
>
> BUILD FAILED
>
> /opt/cc/reporting/dashboard/build.xml:160: Tests failed
>
>
>
>
>
>
>
>
>
> This is my situation and cannot build cruisecontrol
>
>
>
> Can you please suggest me what I am missing in above steps that make build
> failed while build cruise control, If lack of any steps or package, please
> suggest me
>
>
>
> Hoping to get solution from you
>
>
>
> It is very important for me to solve this problem.
>
>
>
> I tried many ways that is found in different sites while googled, but
> results is still same, build failed.
>
> Can you please provide me the right way to build cruisecontrol with source
> package.
>
>
>
>
>
> Thank you
>
>
>
>
>
>
>
> Kindly Regards,
>
> Bal Krishna Shrestha
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>


------------------------------------------------------------------------------
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery, 
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now. 
http://p.sf.net/sfu/quest-d2dcopy1