Re: Welcome to the "Cruisecontrol-user" mailing list

Thank you so much. it worked.  the project name is duplicated twice.  Thank=
s for all your support.

Regards,
Eswari

--------------------------------------------
On Tue, 4/21/15, Kent R. Spillner <[email protected]> wrote:

 Subject: Re: [Cruisecontrol-user] Welcome to the "Cruisecontrol-user"	mail=
ing list
 To: [email protected]
 Date: Tuesday, April 21, 2015, 12:44 PM
 =

 I'm not familiar with
 Synergy, but does the command "ccm
 reconfigure_properties -recurse -refresh
 PROII~HIPE#contbuild_piidev:project:LFPE#1:project:LFPE#1"
 work as expected when you manually run it from the command
 line on the same machine (and logged in as the same user)
 that runs the CruiseControl server?=A0 Is it intentional that
 the substring ":project:LFPE#1" is duplicated
 twice in your project identifier's suffix?
 =

 When CruiseControl runs that
 command it appears the following error messages are sent to
 stderr:
 =

 Warning: Object
 version
 'HIPE#contbuild_piidev:project:LFPE#1:project:LFPE#1'
 too long, use version less than 32 characters long.
 Warning: Could not identify project
 'PROII~HIPE#contbuild_piidev:project:LFPE#1:project:LFPE#1'
 Warning: No valid projects or process rules
 were specified
 =

 =

 Even though those messages are prefixed as
 "Warning" I assume they are identifying the root
 cause of your problem: the configured project identifier
 string is longer than 32 characters.=A0 Start there, try
 running the commands manually until you're sure
 everything works fine at the command line, and then update
 your CruiseControl configuration and try again.
 =

 =

 -----Original
 Message-----
 From: "Eswari" <[email protected]>
 Sent: Tuesday, April 21, 2015 08:45
 To: [email protected]
 Subject: Re: [Cruisecontrol-user] Welcome to
 the "Cruisecontrol-user" mailing list
 =

 Hi,
 =

 I am getting the following error while building
 my synergy project through cruise control.
 =

 2015-04-21 18:35:42,494
 [Thread-67] INFO=A0 Project=A0 =A0 =A0 =A0 =A0 - Project piidev:=A0
 idle
 2015-04-21 18:35:42,494 [Thread-67]
 INFO=A0 ProjectController - piidev Controller: build progress
 event: idle
 2015-04-21 18:35:42,494
 [Thread-67] ERROR ThreadQueue=A0 =A0 =A0 - uncaught exception
 in Thread-67
 net.sourceforge.cruisecontrol.sourcecontrols.CMSynergy$OpperationFailedExc=
eption:
 Could not refresh reconfigure properties for project
 "PROII~HIPE#contbuild_piidev:project:LFPE#1:project:LFPE#1".
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.sourcecontrols.CMSynergy.refreshReconfigureP=
roperties(CMSynergy.java:507)
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.sourcecontrols.CMSynergy.getModifications(CM=
Synergy.java:455)
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.ModificationSet.retrieveModificationsAsEleme=
nt(ModificationSet.java:266)
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.Project.getModifications(Project.java:424)
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.Project.build(Project.java:198)
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.Project.execute(Project.java:147)
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.ProjectConfig.execute(ProjectConfig.java:404)
 =A0=A0=A0 at
 net.sourceforge.cruisecontrol.ProjectWrapper.run(ProjectWrapper.java:69)
 =A0=A0=A0 at
 java.lang.Thread.run(Thread.java:619)
 Caused
 by: net.sourceforge.cruisecontrol.CruiseControlException:
 The command "ccm reconfigure_properties -recurse
 -refresh
 PROII~HIPE#contbuild_piidev:project:LFPE#1:project:LFPE#1"
 returned exit code "1" when "0" was
 expected.
 Stdout: Stderr: Warning: Object
 version
 'HIPE#contbuild_piidev:project:LFPE#1:project:LFPE#1'
 too long, use version less than 32 characters long.
 Warning: Could not identify project
 'PROII~HIPE#contbuild_piidev:project:LFPE#1:project:LFPE#1'
 Warning: No valid projects or process rules
 were specified
 =

 Please do
 let me know what's wrong here.
 =

 Regards,
 Eswari
 --------------------------------------------
 On Tue, 4/21/15, [email protected]
 <[email protected]>
 wrote:
 =

  Subject: Welcome to
 the "Cruisecontrol-user" mailing list
  To: [email protected]
  Date: Tuesday, April 21, 2015, 8:43 AM
  =

  Welcome to the [email protected]
  mailing list!
  =

  To post to this list, send your email to:
  =

  =A0 [email protected]
  =

  General information about
 the mailing list is at:
  =

 =

 =A0 https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user
  =

  If you ever want to
 unsubscribe or change your options (eg,
 =

 switch to
  or from digest mode, change your
 password, etc.), visit
  your
  subscription page at:
  =

  =A0 https://lists.sourceforge.net/lists/options/cruisecontrol-user/sravin=
ut%40yahoo.com
  =

  =

  You can
 also make such adjustments via email by sending a
  message to:
  =

 =

 =A0 [email protected]
  =

  with the word `help' in
 the subject or body (don't include
 =

 the
  quotes), and you will get back a
 message with instructions.
  =

  You must know your password to change your
 options
  (including changing
  the password, itself) or to unsubscribe.=A0 It
 is:
  =

  =A0 pangulur1935
  =

  Normally, Mailman will
 remind you of your
  lists.sourceforge.net
  mailing list passwords once every month,
 although you can
  disable this
  if you prefer.=A0 This reminder will also
 include
  instructions on how to
  unsubscribe or change your account options.=A0
 There is
  also a button on
 =

 your options page that will email your current password
 to
  you.
  =

 =

 --------------------------------------------------------------------------=
----
 BPM Camp - Free Virtual Workshop May 6th at
 10am PDT/1PM EDT
 Develop your own process in
 accordance with the BPMN 2 standard
 Learn
 Process modeling best practices with Bonita BPM through live
 exercises
 http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
 event?utm_
 source=3DSourceforge_BPM_Camp_5_6_15&utm_medium=3Demail&utm_campaign=3DVA_=
SF
 _______________________________________________
 Cruisecontrol-user mailing list
 [email protected]
 https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user
 =

 =

 =

 --------------------------------------------------------------------------=
----
 BPM Camp - Free Virtual Workshop May 6th at
 10am PDT/1PM EDT
 Develop your own process in
 accordance with the BPMN 2 standard
 Learn
 Process modeling best practices with Bonita BPM through live
 exercises
 http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
 event?utm_
 source=3DSourceforge_BPM_Camp_5_6_15&utm_medium=3Demail&utm_campaign=3DVA_=
SF
 _______________________________________________
 Cruisecontrol-user mailing list
 [email protected]
 https://lists.sourceforge.net/lists/listinfo/cruisecontrol-user
 =


---------------------------------------------------------------------------=
---
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=3DSourceforge_BPM_Camp_5_6_15&utm_medium=3Demail&utm_campaign=3DVA_SF