Re: httptunneling/callback

Yes, Daniel, but you were talking about proxy/firewall. My question is 
more oriented towards the NAT problem. Has this problem been faced, in 
0.7.7-dev?
M.

> Wrong assumption... Tim has said that a new version is quite a long 
> ways off, what I suggested is that the 0.7.7-dev (i.e. head) will make 
> things easier, but I have no idea when the next version will be out.
>
> On Apr 8, 2005, at 5:59 AM, Laszlo Schaffer personal wrote:
>
>> Hello Marco!
>>
>> You can download the 0.7.7-dev source from the openjms sourceforge and
>> compile it.
>> I have made it but I did not tried this new feature yet…
>>
>> As you see in the message chain there will be a new version in few 
>> days that
>> is helping to solve this problem (hopefully)
>>
>> Regards
>> saf
>>
>>
>> -----Original Message-----
>> From: openjms-user-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>> [mailto:openjms-user-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of Marco 
>> Lettere
>> Sent: 2005. április 8. 9:50
>> To: [email protected]
>> Subject: Re: [openjms-user] httptunneling/callback
>>
>> Hello to everyone,
>> I would like to hook up this thread to ask you about NAT-ted clients and
>> Http(s) tunneling.
>> We have serious problems making the Http tunneled connection work in
>> presence of NAT-ted clients.
>> In effect, it doesn't work! ;-)
>> Is there a way (or will it be one) to work around NAT networks? I read
>> something about this new ".war" webapp that would be able to solve this
>> by avoiding server->client connections when implementing tunneling but I
>> couldn't find it. Is it a 0.7.7 feature or could we use it also for 
>> 0.7.6?
>> What is the time for making the 0.7.7 release?
>> Thank you,
>> M.
>>
>> Daniel Otero wrote:
>>
>>> Hi saf, what you need to do (if you are using the 0.7.7-dev version)
>>> is (if you can wait a few days things will be simplified a bit):
>>>
>>> On the server side:
>>>
>>> 1) place the .war in the webapps/ directory.
>>>
>>> 2) define the https connector and it's configuration like this (in the
>>> openjms.xml):
>>>
>>> <Connectors>
>>> <Connector scheme="https">
>>> <ConnectionFactories>
>>> <TopicConnectionFactory name="TopicConnectionFactory" />
>>> <QueueConnectionFactory name="QueueConnectionFactory" />
>>> </ConnectionFactories>
>>> </Connector>
>>> </Connectors>
>>>
>>> <HttpsConfiguration webServerHost="your.webserver.com"
>>> webServerPort="9999"
>>> port="3030"
>>> servlet="/openjms-tunnel/tunnel"
>>> />
>>>
>>> Note: in the next few days the TopicConnectionFactory and
>>> QueueConnectionFactory will be replaced by a single entry like so -
>>> and the examples should be modified accordingly:
>>>
>>> <ConnectionFactory name="ConnectionFactory" />
>>>
>>> On the cliet side...
>>>
>>> 1) You need to set up your keystore and run your java client with the
>>> usual parameters (-Djavax.net.ssl.trustStore="$TSTORE"
>>> -Djavax.net.ssl.keyStore="$KSTORE" -Djavax.net.ssl.keyStoreType="jks"
>>> -Djavax.net.ssl.keyStorePassword="$KPASS" )
>>>
>>> I believe the plan is to make these part of the jndi.properties file
>>> (i.e. look in examples/basic and see 2) below). But that won't happen
>>> for a few days...
>>>
>>> 2) The good news is that if you need to use a proxy-server to get
>>> through the corporate firewall the properties to do this can already
>>> be specified in the jndi.properties file like so (much like the ssl
>>> ones will probably end up):
>>>
>>> org.exolab.jms.net.https.proxyHost=local.proxy.com
>>> org.exolab.jms.net.https.proxyPort=3128
>>>
>>> if user authentication is required you can also use the following:
>>>
>>> org.exolab.jms.net.https.proxyUser=user
>>> org.exolab.jms.net.https.proxyPassword=password
>>>
>>> On Apr 7, 2005, at 11:07 AM, Laszlo Schaffer personal wrote:
>>>
>>>     Hello!
>>>
>>>
>>>
>>>     It is possible to use MessageListener…onMessage() behind a client
>>>     firewall?
>>>
>>>     I have read something about this TunnelServlet but I do not know
>>>     how can I use this?
>>>
>>>     What I need a configuration where a client there is behind a
>>>     firewall (the jms server server also) and the connection is being
>>>     made using https
>>>
>>>     Recently have download and compiled the 0.7.7-dev version but how
>>>     can I use this Tunneling feature?
>>>
>>>
>>>
>>>     Thanks
>>>
>>>     saf
>>>
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>> _______________________________________________
>> openjms-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/openjms-user
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
>> _______________________________________________
>> openjms-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/openjms-user
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
> _______________________________________________
> openjms-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/openjms-user




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click