Re: KOLAB3.1 fresh install cyrus fail

Manel Gimeno Zaragozá <[email protected]>
Newsgroups gmane.comp.kde.devel.kolab,gmane.comp.kde.kolab.devel
Message-ID <[email protected]> 
Its strange. I've been testing and changing the configuration.

I've replaced the imapd.conf line:
ldap_filter: (|(&(|(uid=cyrus-admin)(uid=cyrus-murder))(uid=%U))(&(|(uid=%U)(mail=%U@%d)(mail=%U@%r))(objectclass=organizationalperson)))

for

ldap_filter: uid=cyrus-admin

and but in the ldap log file I see that it is looking for:

[27/Jun/2013:15:42:09 +0200] conn=28 op=3 SRCH base="dc=kolab,dc=ddol,dc=es" scope=2 filter="(&(|(mail=cyrus.administrator)([email protected])(alias=cyrus.administrator)([email protected])(uid=cyrus.administrator)([email protected]))(objectClass=kolabinetorgperson))" attrs="entrydn"

Manel


> Date: Thu, 27 Jun 2013 13:49:37 +0200
> From: [email protected]
> To: [email protected]
> Subject: Re: [Kolab-devel] KOLAB3.1 fresh install cyrus fail
> 
> I have tried it with the rpms from
> http://mirror.kolabsys.com/pub/redhat/kolab-3.1/el6/development/x86_64/
> as well, and the problem is the same.
> So the reason does not come from the nightly builds itself.
> 
> On 27 June 2013 11:56, Timotheus Pokorra <[email protected]> wrote:
> > Hello Manel,
> >
> > I can confirm this problem.
> > At the moment I cannot think of a solution or a reason for this.
> >
> > Timotheus
> >
> > On 27 June 2013 11:26, Manel Gimeno Zaragozá <[email protected]> wrote:
> >> Hello,
> >>
> >> Today I try to intall a fresh install of kolab3.1, again hoping that a new
> >> nightly build was uploaded. But I'm still getting the same error in cyrus.
> >> Please find the package info:
> >>
> >> $ rpm -qai kolab
> >> Name        : kolab                        Relocations: (not relocatable)
> >> Version     : 3.0.0                             Vendor: Kolab Systems AG
> >> Release     : 1.el6.kolab_3.0               Build Date: Fri 03 Aug 2012
> >> 06:07:50 PM CEST
> >> Install Date: Thu 27 Jun 2013 11:05:47 AM CEST      Build Host:
> >> koji02.kolabsys.com
> >> Group       : Applications/System           Source RPM:
> >> kolab-3.0.0-1.el6.kolab_3.0.src.rpm
> >> Size        : 133                              License: GPL
> >> Signature   : (none)
> >> Packager    : Kolab Systems AG
> >> URL         : http://www.kolab.org
> >> Summary     : The Kolab Groupware Solution
> >> Description :
> >> The Kolab Groupware solution is a fully-featured Free Software groupware
> >> solution,
> >> and this is the meta-package you can use to install it with.
> >>
> >> $ rpm -qai cyrus-imapd
> >> Name        : cyrus-imapd                  Relocations: (not relocatable)
> >> Version     : 2.5                               Vendor: Kolab Systems AG
> >> Release     : 0.1.dev6.git534066.el6.kolab_3.1   Build Date: Mon 17 Jun 2013
> >> 04:58:05 PM CEST
> >> Install Date: Thu 27 Jun 2013 11:05:08 AM CEST      Build Host:
> >> koji04.kolabsys.com
> >> Group       : System Environment/Daemons    Source RPM:
> >> cyrus-imapd-2.5-0.1.dev6.git534066.el6.kolab_3.1.src.rpm
> >> Size        : 4732084                          License: BSD
> >> Signature   : (none)
> >> Packager    : Kolab Systems AG
> >> URL         : http://www.cyrusimap.org
> >> Summary     : A high-performance mail server with IMAP, POP3, NNTP and SIEVE
> >> support
> >>
> >> I'm getting the same error:
> >>
> >>
> >> $ kolab list-mailboxes
> >> Traceback (most recent call last):
> >>   File "/usr/sbin/kolab", line 39, in <module>
> >>     kolab = Cli()
> >>   File "/usr/lib/python2.6/site-packages/pykolab/cli/__init__.py", line 64,
> >> in __init__
> >>     commands.execute('_'.join(to_execute))
> >>   File "/usr/lib/python2.6/site-packages/pykolab/cli/commands.py", line 139,
> >> in execute
> >>     commands[cmd_name]['function'](conf.cli_args, kw)
> >>   File "/usr/lib/python2.6/site-packages/pykolab/cli/cmd_list_mailboxes.py",
> >> line 70, in execute
> >>     imap.connect()
> >>   File "/usr/lib/python2.6/site-packages/pykolab/imap/__init__.py", line
> >> 154, in connect
> >>     self._imap[hostname].login(admin_login, admin_password)
> >>   File "/usr/lib/python2.6/site-packages/pykolab/imap/cyrus.py", line 133,
> >> in login
> >>     cyruslib.CYRUS.login(self, *args, **kw)
> >>   File "/usr/lib/python2.6/site-packages/cyruslib.py", line 416, in login
> >>     self.__doexception("LOGIN", error)
> >>   File "/usr/lib/python2.6/site-packages/cyruslib.py", line 359, in
> >> __doexception
> >>     self.__doraise( function.upper(), msg )
> >>   File "/usr/lib/python2.6/site-packages/cyruslib.py", line 368, in
> >> __doraise
> >>     raise CYRUSError( idError[0], mode, msg )
> >> cyruslib.CYRUSError: (10, 'LOGIN', 'authentication failure')
> >>
> >> any help?
> >>
> >> Thanks & Regards.
> >>
> >> Manel
> >>
> >> ________________________________
> >> From: [email protected]
> >> To: [email protected]
> >> Date: Fri, 14 Jun 2013 09:56:34 +0200
> >> Subject: [Kolab-devel] KOLAB3.1 fresh install cyrus fail
> >>
> >>
> >> Hello,
> >>
> >> I'm testesting the last rpm of 3.1 nightly build following the installation
> >> from
> >> http://www.tbits.net/tbits-opensource/install-nightly-build-from-gitkolaborg-master.html
> >>
> >> After setup-kolab I'm able to login into kolab-webadmin and create a user,
> >> but when I try to list cyrus mailboxes I'm getting an authentication failure
> >> error:
> >>
> >> # kolab list-mailboxes
> >> Traceback (most recent call last):
> >>   File "/usr/sbin/kolab", line 39, in <module>
> >>     kolab = Cli()
> >>   File "/usr/lib/python2.6/site-packages/pykolab/cli/__init__.py", line 64,
> >> in __init__
> >>     commands.execute('_'.join(to_execute))
> >>   File "/usr/lib/python2.6/site-packages/pykolab/cli/commands.py", line 139,
> >> in execute
> >>     commands[cmd_name]['function'](conf.cli_args, kw)
> >>   File "/usr/lib/python2.6/site-packages/pykolab/cli/cmd_list_mailboxes.py",
> >> line 70, in execute
> >>     imap.connect()
> >>   File "/usr/lib/python2.6/site-packages/pykolab/imap/__init__.py", line
> >> 154, in connect
> >>     self._imap[hostname].login(admin_login, admin_password)
> >>   File "/usr/lib/python2.6/site-packages/pykolab/imap/cyrus.py", line 133,
> >> in login
> >>     cyruslib.CYRUS.login(self, *args, **kw)
> >>   File "/usr/lib/python2.6/site-packages/cyruslib.py", line 416, in login
> >>     self.__doexception("LOGIN", error)
> >>   File "/usr/lib/python2.6/site-packages/cyruslib.py", line 359, in
> >> __doexception
> >>     self.__doraise( function.upper(), msg )
> >>   File "/usr/lib/python2.6/site-packages/cyruslib.py", line 368, in
> >> __doraise
> >>     raise CYRUSError( idError[0], mode, msg )
> >> cyruslib.CYRUSError: (10, 'LOGIN', 'authentication failure')
> >>
> >> and in maillog:
> >>
> >> Jun 14 09:29:51 host imaps[3900]: starttls: TLSv1 with cipher
> >> DHE-RSA-AES256-SHA (256/256 bits new) no authentication
> >> Jun 14 09:29:51 host imaps[3900]: SASL unable to open Berkeley db
> >> /etc/sasldb2: No such file or directory
> >> Jun 14 09:29:51 host imaps[3900]: SASL unable to open Berkeley db
> >> /etc/sasldb2: No such file or directory
> >> Jun 14 09:29:51 host imaps[3900]: badlogin: localhost.ddol-test.com
> >> [127.0.0.1] plaintext cyrus-admin SASL(-13): authentication failure:
> >> checkpass failed
> >>
> >> neither I'm able to log into cyrus using cyradm.
> >>
> >> I've check imap.conf and I've check the user to bind into LDAP ,
> >>
> >> if I try to search into LDAP with imap.conf options
> >>
> >> # ldapsearch -LLL -x -h localhost -p 389 -D "uid=kolab-service,ou=Special
> >> Users,dc=kolab,dc=ddol,dc=es" -w datadec -z none -s sub -b
> >> "dc=kolab,dc=ddol,dc=es" uid=cyrus-admin
> >> dn: uid=cyrus-admin,ou=Special Users,dc=kolab,dc=ddol,dc=es
> >> sn: Administrator
> >> uid: cyrus-admin
> >> objectClass: top
> >> objectClass: person
> >> objectClass: inetorgperson
> >> objectClass: organizationalperson
> >> givenName: Cyrus
> >> cn: Cyrus Administrator
> >>
> >> But when I try to use the imap.conf filter it fails. I've seen that
> >> imap.conf filter look for "objectclass=kolabinetorgperson" but this object
> >> is not associated to user kolab-service. The object associated is
> >> "objectClass=inetorgperson".
> >>
> >> anyway, I've change filter in imap.conf but it's still not working.
> >>
> >> Can any one help me?
> >>
> >> Manel
> >>
> >> _______________________________________________ Kolab-devel mailing list
> >> [email protected] https://www.intevation.de/mailman/listinfo/kolab-devel
> >>
> >> _______________________________________________
> >> Kolab-devel mailing list
> >> [email protected]
> >> https://www.intevation.de/mailman/listinfo/kolab-devel
> 
> _______________________________________________
> Kolab-devel mailing list
> [email protected]
> https://www.intevation.de/mailman/listinfo/kolab-devel

_______________________________________________
Kolab-devel mailing list
[email protected]
https://www.intevation.de/mailman/listinfo/kolab-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.