Re: cross compile error for SSL suport

Hi.

I know, of course the konq/e can open web page with https protocol. But 
although  I added the  configure option : --with-ssl-dir=$(OPENSSL_DIR) 
and --with-ssl-version=0.9.7i,  konq/e on my target board show a dialog 
message "Could not connect to host ****".

If you like, Could you please tell me how  you configured your konq/e on arm 
?

regards

inoue masatoshi
----- Original Message ----- 
From: "Akshay Mishra" <[email protected]>
To: <[email protected]>
Sent: Thursday, March 22, 2007 8:41 PM
Subject: Re: cross compile error for SSL suport


>I am replying using an arm linux and konqueror
> it works. some config problems on your machine
>
>
> On 3/20/07, inoue masatoshi <[email protected]> wrote:
>> Hi,
>>
>> Thanks for your replying.
>> But even I retried to compile the konq/e with OpenSSL-0.9.7i, the message
>> was not changed.
>>
>> well, If I compile the konq/e without option "--disable-dynamic-ssl", 
>> then I
>> could complete the compalition. and I put the libssl and libcrypt to /lib 
>> of
>> target board.
>> then debug message of konq/e when I open the web page with https protocol
>> was follows.
>> 
>> 
>> 
>> debug: KSSL initialize
>> debug: Cipher list:
>> RC4-MD5:RC4-SHA:DES-CBC3-SHA:RC2-CBC-MD5:DES-CBC3-MD5:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DH-RSA-AES256-SHA:DH-DSS-AES256-SHA:AES256-SHA:EDH-RSAA
>> debug: KSSL connected OK
>> debug: KSSL connected OK
>> debug: X509Callback: ok = 0 error = 18
>> debug: X509Callback: ok = 0 error = 18
>> debug: Matching CN=[sodesu-test] to [sodesu-test]
>> debug: X509Callback: ok = 0 error = 18
>> debug: X509Callback: ok = 0 error = 18
>> debug: Matching CN=[sodesu-test] to [sodesu-test]
>> debug: SSL HTTP frame the parent?
>> debug: dcopclient::call(kded, kssld,
>> cacheGetPolicyByCertificate(KSSLCertificate))
>> debug: DCOPDispatcher::slotDispatch() 16
>> debug: SSL HTTP frame the parent?
>> debug: dcopclient::call(kded, kssld,
>> cacheGetPolicyByCertificate(KSSLCertificate))
>> debug: DCOPDispatcher::slotDispatch() 20
>> debug: needs a msg box
>> debug: messageBox 4 The server certificate failed the authenticity test
>> (sodesu-test). - Server Authentication
>> debug: SlaveInterface::messageBox m_progressId=0
>>
>> This is last part of debug messages of konq/e .
>> And here, the konq/e did hung up!
>> Could anyone please tell me how I can solve this?
>>
>> And I have question.
>> I checked configure script about OpenSSL, then output of configure script
>> say:
>> "checking whether OpenSSL uses rsaref... no"
>>
>> rsaref must be needed for konq/e???
>>
>> regards
>>
>> inoue masatoshi
>>
>>
>> ----- Original Message -----
>> From: "Akshay Mishra" <[email protected]>
>> To: "inoue masatoshi" <[email protected]>
>> Sent: Monday, March 19, 2007 7:18 PM
>> Subject: Re: cross compile error for SSL suport
>>
>>
>> > use openssl-0.9.7i. that should hopefully solve the problem.
>> >
>> > Akshay
>> >
>> > On 3/19/07, inoue masatoshi <[email protected]> wrote:
>> >> Hello all
>> >>
>> >> I would like to use konqueror embedded with https protocol suport, so 
>> >> I
>> >> cross compiled openssl-0.9.6c with opetion :
>> >> ./Configure no-idea no-threads shared --prefix=$(pwd)/dist
>> >>
>> >> then, I reconfigure  konqueror3-embedded-0.2-20040524 with option:
>> >>
>> >> ./configure --enable-qt-embedded --enable-embedded
>> --host=i686-pc-linux-gnu
>> >> --target=arm-linux --disable-mt --disable-pcre --disable-threading
>> --includedir=/usr/include/kde,/home/inoue/workspace/openssl/dist/include
>> >>  --prefix=/home/shared/konqe
>> --with-qt-dir=/usr/local/qt-embedded-free-3.3.5
>> >>  --enable-add-ons=felicacard,setting --with-gui=kiosk
>> --with-ssl-dir=/home/inoue/workspace/openssl/dist
>> >>  --with-ssl-version=0.9.6c
>> >>
>> >> and, it compiled fine, but when I open a web page with https protocol,
>> >> then
>> >> I got message "Could not connect host ******"
>> >> I thought this is similar problem to
>> >> http://lists.kde.org/?l=konq-e&m=100807797116559&w=2.
>> >> So I retried configure of konqueror embedded with option:
>> >>
>> >> ./configure --enable-qt-embedded --enable-embedded
>> --host=i686-pc-linux-gnu
>> >> --target=arm-linux --disable-mt --disable-pcre --disable-threading
>> --includedir=/usr/include/kde,/home/inoue/workspace/openssl/dist/include
>> >>  --prefix=/home/shared/konqe
>> --with-qt-dir=/usr/local/qt-embedded-free-3.3.5
>> >>  --enable-add-ons=felicacard,setting --with-gui=kiosk
>> --with-ssl-dir=/home/inoue/workspace/openssl/dist
>> >>  --with-ssl-version=0.9.6c --disable-dynamic-ssl
>> >>
>> >> then I got following message
>> >>
>> >> /bin/sh ../../libtool --silent --mode=link --tag=CXX
>> >> rm-linux-g++  -Wnon-virtual-dtor -Wno-long-long -Wundef -ansi
>> -D_XOPEN_SOURCE=500
>> >>  -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W
>> -Wpointer-arith
>> >>  -Wwrite-strings -O2 -fno-exceptions -fno-check-new -fno-common
>> -DQT_NO_ASCII_CAST
>> >>     -o
>> >> konqueror -L/home/inoue/workspace/openssl/dist/lib
>> -R/home/inoue/workspace/openssl/dist/lib
>> >>  -L/usr/local/qt-embedded-free-3.3.5/lib -L/home/shared/konqe/lib
>> -export-dynamic
>> >> main.o mainwindowbase.o mainwindebug.o htmlview.o popuphandler.o 
>> >> view.o
>> >> run.o browseriface.o bookmarks.o preferences.o preferencesimpl.o
>> >> mainwindow_qpe.o mainwindow_x11.o mainwindow_kiosk.o mainwindow_tv.o
>> >> xmltree.o bookmarkeditor.o bookmarkeditorimpl.o bookmarkedit.o
>> >> bookmarkeditimpl.o simpleim.o
>> >> ../../konq-embed/add-ons/felicacard/libfelica_e.la
>> >> ../../konq-embed/add-ons/setting/libsetting_e.la
>> >> ./../dropin/kio/libkiodropin.la
>> >> ../../konq-embed/kdesrc/khtml/ecma/libkjs_html_i.la
>> >> ../../konq-embed/kdesrc/kjs/libkjs.la  ../lib/libkonqe.la
>> >> ./../kdesrc/kparts/libkparts.la ./../dropin/libdropin.la
>> >> ./../dropin/kparts/libkpartsdropin.la
>> >> ../../konq-embed/kdesrc/khtml/libkhtml_i.la
>> >> ../dropin/kssl/libkssldropin.la
>> >> ../kdesrc/kssl/libkssl.la
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_check_purpose(x509_st *, int, int)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::EVP_md5(void)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::ERR_print_errors_fp(_IO_FILE *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::RAND_load_file(char const *, long)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::SSL_peek(ssl_st *, void *, int)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_get_pubkey(x509_st *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_PURPOSE_get_count(void)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_STORE_CTX_set_purpose(x509_store_ctx_st *, int)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_get_serialNumber(x509_st *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_digest(x509_st const *, env_md_st const *, 
>> >> unsigned
>> >> char *, unsigned int *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::i2d_PKCS12(PKCS12 *, unsigned char **)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_PURPOSE_get0(int)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::OBJ_obj2nid(asn1_object_st *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_PURPOSE_get_id(x509_purpose_st *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::i2s_ASN1_INTEGER(v3_ext_method *, asn1_string_st *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::sk_pop(stack_st *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::RAND_write_file(char const *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::BN_bn2hex(bignum_st const *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::ERR_clear_error(void)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::SSL_accept(ssl_st *)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::OBJ_nid2ln(int)'
>> >> ../lib/.libs/libkonqe.so: undefined reference to
>> >> `KOpenSSLProxy::X509_check_private_key(x509_st *, evp_pkey_st *)'
>> >> collect2: ld returned 1 exit status
>> >> make[5]: *** [konqueror]  1
>> >> make[5]: Leaving directory
>> >>
>> `/home/inoue/workspace/konq_arm/konqueror3-embedded-0.2-20040524/konq-embed/src'
>> >> make[4]: *** [all-recursive]  1
>> >> make[4]: Leaving directory
>> >>
>> `/home/inoue/workspace/konq_arm/konqueror3-embedded-0.2-20040524/konq-embed/src'
>> >> make[3]: *** [all]  2
>> >> make[3]: Leaving directory
>> >>
>> `/home/inoue/workspace/konq_arm/konqueror3-embedded-0.2-20040524/konq-embed/src'
>> >> make[2]: *** [all-recursive]  1
>> >> make[2]: Leaving directory
>> >>
>> `/home/inoue/workspace/konq_arm/konqueror3-embedded-0.2-20040524/konq-embed'
>> >> make[1]: *** [all-recursive]  1
>> >> make[1]: Leaving directory
>> >> `/home/inoue/workspace/konq_arm/konqueror3-embedded-0.2-20040524'
>> >> make: *** [all]  2
>> >>
>> >> somewhere you can see "", sorry it is Japanese and it means 
>> >> "error"
>> >> Could anyone please tell me advice to fix this problem?
>> >>
>> >> regards
>> >>
>> >> inoue
>> >>
>> >>
>> >> _______________________________________________
>> >> konq-e mailing list
>> >> [email protected]
>> >> https://mail.kde.org/mailman/listinfo/konq-e
>> >>
>> >
>>
>>
>> _______________________________________________
>> konq-e mailing list
>> [email protected]
>> https://mail.kde.org/mailman/listinfo/konq-e
>>
>
>