Re: Problems building Konq/e with Qtopia Core

Hello Max, thank you very much for your help.
It worked!

...but now I have problems with the class http.cc.

First of all, the line

#include <qdom.h>

was commented and there were problems with finding QDomElement and
QDomDocument classes. So I uncommented that line, but now the problem is
that we have calls to the function setContent with a bool parameter passed
(line 746)

multiResponse.setContent( m_bufWebDavData, true );

but qdom.h defines

bool setContent( const QByteArray& text );

Another problem is that at line 902 there is a call to
QDomElement::namespaceURI(), which is not defined in qdom.h.

I recall that I'm using qt-2.3.10. Am I missing something?

Thanks in advance and kind regards.


2008/1/21 Max Andruschenko <[email protected]>:

>  Hello friend!
>
> The solution for your problem is:
>
> open kextsock.h
> comment the lines
> #ifdef Q_OS_UNIX
> and it's #endif
>
> That's all.
>
> Have a nice day!
>
> ----- Original Message -----
> *From:* Piero Pezzin <[email protected]>
> *To:* For discussion of Konqueror/Embedded <[email protected]>
> *Sent:* Friday, January 18, 2008 7:18 PM
> *Subject:* Re: Problems building Konq/e with Qtopia Core
>
> Hello everyone.
> After unnumbered attempts, I got some results: configure works fine and
> make starts correctly. But it blocks at a certain point, complaining about
> the file ftp.h, as you can see from the messages below:
>
> If /bin/sh ../../../libtool --silent --tag=CXX --mode=compile
> arm-linux-g++
> -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../konq-embed/kdesrc/kdecore
> -I../../../konq-embed/kdesrc/kjs -I../../../konq-embed/kdesrc/kssl
> -I../../../konq-embed/dropin -I../../../konq-embed/dropin/kio
> -I../../../konq-embed/dropin/kssl -I../../../konq-embed/kdesrc
> -I../../../konq-embed/kdesrc/kdecore
> -I../../../konq-embed/kdesrc/kdecore/network
> -I../../../konq-embed/kdesrc/kssl
> -I../../../konq-embed/kdesrc/kssl   -I/home/piero/konq-embedded/include
> -I/home/piero/work/qt-2.3.10/include
> -I/home/piero/work/qtopia-free-2.2.0/qtopia/include/qtopia
> -DQT_THREAD_SUPPORT -DQWS -D_REENTRANT  -Wno-long-long -Wundef -ansi
> -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion
> -Wchar-subscripts
> -Wall -W -Wpointer-arith -fno-builtin -g3 -fno-inline -Wformat-security
> -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions
> -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT
> -DQT_NO_ASCII_CAST  -MT ftp.lo -MD -MP -MF ".deps/ftp.Tpo" -c -o ftp.lo
> ftp.cc; \
> then mv -f ".deps/ftp.Tpo" ".deps/ftp.Plo"; else rm -f ".deps/ftp.Tpo";
> exit
> 1; fi
> In file included from ftp.cc:26:
> ftp.h:141: error: parse error before `{' token
> ftp.h:154: error: ISO C++ forbids declaration of `m_server' with no type
> ftp.h:155: error: parse error before `}' token
> ftp.h:157: error: destructors must be member functions
> ftp.h: In function `void FtpSocket()':
> ftp.h:157: error: `closeSocket' undeclared (first use this function)
> ftp.h:157: error: (Each undeclared identifier is reported only once for
> each
>    function it appears in.)
> ftp.h: At global scope:
> ftp.h:162: error: `void closeSocket()' used prior to declaration
> ftp.h:169: error: non-member function `int server()' cannot have `const'
> method
>    qualifier
> ftp.h:179: error: non-member function `int sock()' cannot have `const'
> method
>    qualifier
> ftp.h: In function `int sock()':
> ftp.h:179: error: `fd' undeclared (first use this function)
> ftp.h: At global scope:
> ftp.h:184: error: non-member function `void debugMessage(const char*)'
> cannot
>    have `const' method qualifier
> ftp.h:189: error: non-member function `int errorMessage(int, const char*)'
>
>    cannot have `const' method qualifier
> ftp.h:199: error: non-member function `bool setSocketOption(int, char*,
>    unsigned int)' cannot have `const' method qualifier
> ftp.h: In function `int textRead()':
> ftp.h:222: error: invalid use of `this' in non-member function
> ftp.h: At global scope:
> ftp.h:225: error: parse error before `private'
> ftp.h:227: error: redefinition of `int m_server'
> ftp.h:154: error: `int m_server' previously defined here
> ftp.h:228: error: parse error before `}' token
> ftp.h:590: error: syntax error before `*' token
> ftp.h:595: error: syntax error before `*' token
> ftp.cc:170: error: `pSock' was not declared in this scope
> ftp.cc:171: error: `int FtpTextReader::textRead' is not a static member of
> `
>    class FtpTextReader'
>
> To me the file seems correct, but I can be wrong. I'm using
> kdenox_snapshot_qt2_20070531, with qt-embedded 2.3.10 and qtopia 2.2.0.
>
> Any clue?
>
> Thanks in advance and kind regards.
>
>
> On Jan 15, 2008 2:48 PM, Piero Pezzin <[email protected] > wrote:
>
> > Ok, thanks. If I'll fail with the building of Konq/e, I will wait for
> > the next version of Qtopia.
> >
> >
> > On Jan 15, 2008 2:12 PM, Luciano Montanaro <[email protected] >
> > wrote:
> >
> > > Il Tuesday 15 January 2008 14:00:08 Piero Pezzin ha scritto:
> > > > Thank you very much.
> > > > So I can forget about qt and concentrate on qt/embedded and qtopia.
> > > That's
> > > > what I wanted to hear. There is a lot of confusion about this
> > > topic..
> > > >
> > > > Ok, I'm going to try. I suppose it won't be a pleasant work...
> > >
> > > Well, not exactly. Qt3 (at least Qt3.3) *used* to work correctly. I
> > > think
> > > there are a few issues with Qt3 and current SVN, but those should be
> > > easy
> > > enough to fix. What is not going to work is using Qtopia (Or Qt 4, for
> > > that
> > > matter). But Qt4.4 should ship with Webkit, so if you can wait (it is
> > > expected in Q1 2008, so within a few months now) that could provide
> > > you with
> > > a good browser component to start off.
> > >
> > > Luciano
> > >
> > > >
> > > > 2008/1/15 Max Andruschenko <[email protected]>:
> > > > >  Hi dear friend.
> > > > >
> > > > > I can say you a definitly wrong.
> > > > > You can compile Konqueror embedded only for qtopia version 2.2.0or
> > > > > 2.2.2. So, first you should to do is to get qt embedded version
> > > 2.3.10 or
> > > > > 2.3.12. Compile it with your cross compiler, at the end you should
> > > get
> > > > > qte-mt multithread library. And you should compile it with rtti
> > > support,
> > > > > by default it compiles without rtti.
> > > > > Then compile qtopia version 2.2.0 with library qte-mt. If during
> > > the
> > > > > building you get qte library, remove it from the folder. Also you
> > > should
> > > > > compile qtopia with rtti support.
> > > > > Then compile konqueror.
> > > > >
> > > > > Good luck!
> > >
> > >
> > > _______________________________________________
> > > konq-e mailing list
> > > [email protected]
> > > https://mail.kde.org/mailman/listinfo/konq-e
> > >
> >
> >
>  ------------------------------
>
> _______________________________________________
> konq-e mailing list
> [email protected]
> https://mail.kde.org/mailman/listinfo/konq-e
>
>
> _______________________________________________
> konq-e mailing list
> [email protected]
> https://mail.kde.org/mailman/listinfo/konq-e
>
>

_______________________________________________
konq-e mailing list
[email protected]
https://mail.kde.org/mailman/listinfo/konq-e