Re: Problems building Konq/e with Qtopia Core
"Piero Pezzin" <[email protected]> Tue, 22 Jan 2008 12:04:02 +0100
| Newsgroups | gmane.comp.kde.devel.konq-e |
|---|---|
| Message-ID | <[email protected]> |
Hello everyone. I saw that the http.cc file has lines like this: #if !defined(QT_NO_DOM) before the sections that cause problems. Do you think I have to recompile qt-embedded forcing the QT_NO_DOM define in qconfig.h? Or is it enough configure Konq/e to use a qconfig.h which defines QT_NO_DOM, even if the qt-embedded library is compiled with dom support? If the second is the right solution, how can I make Konq/e point to a different qconfig.h? Thanks in advance. On Jan 21, 2008 12:45 PM, Piero Pezzin <[email protected]> wrote: > Of course! > Here you are (look for lines 904, 1489, 1520, 1647): > > If /bin/sh ../../../../libtool --silent --tag=CXX --mode=compile > arm-linux-g++ -DHAVE_CONFIG_H -I. -I. -I../../../.. > -I../../../../konq-embed/kdesrc/kdecore -I../../../../konq-embed/kdesrc/kjs > -I../../../../konq-embed/kdesrc/kssl -I../../../../konq-embed/dropin > -I../../../../konq-embed/kdesrc/kdecore > -I../../../../konq-embed/kdesrc/kdecore/network > -I../../../../konq-embed/kdesrc/kssl > -I../../../../konq-embed/kdesrc/interfaces > -I../../../../konq-embed/dropin/kio -I./../.. -I./../ > -I/home/piero/konq-embedded/include -I/home/piero/work/qt- 2.3.10/include > -I/home/piero/work/qtopia-free-2.2.0/qtopia/include/qtopia > -DQT_THREAD_SUPPORT -DQWS -D_REENTRANT -DMAX_CACHE_AGE=300 -Wno-long-long > -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion > -Wchar-subscripts -Wall -W -Wpointer-arith -fno-builtin -g3 -fno-inline > -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor > -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE > -DQT_NO_COMPAT -DQT_NO_ASCII_CAST -MT libkiohttp_la.all_cc.lo -MD -MP -MF > ".deps/libkiohttp_la.all_cc.Tpo" -c -o libkiohttp_la.all_cc.lo > libkiohttp_la.all_cc.cc; \ > then mv -f ".deps/libkiohttp_la.all_cc.Tpo" > ".deps/libkiohttp_la.all_cc.Plo"; else rm -f > ".deps/libkiohttp_la.all_cc.Tpo"; exit 1; fi > In file included from libkiohttp_la.all_cc.cc:2: > http.cc: In constructor `HTTPProtocol::HTTPProtocol(const QCString&, const > QCString&, const QCString&)': > http.cc:215: warning: assignment of negative value `-1' to `filesize_t' > http.cc:215: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc: In member function `void HTTPProtocol::resetResponseSettings()': > http.cc:270: warning: assignment of negative value `-1' to `filesize_t' > http.cc:270: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc: In member function `void HTTPProtocol::davParsePropstats(const > QDomNodeList&, KIO::UDSEntry&)': > http.cc:904: error: `namespaceURI' undeclared (first use this function) > http.cc:904: error: (Each undeclared identifier is reported only once for > each > function it appears in.) > http.cc: In member function `void HTTPProtocol::davLock(const KURL&, const > QString&, const QString&, const QString&)': > http.cc:1489: error: `createElementNS' undeclared (first use this > function) > http.cc:1520: error: no matching function for call to > `QDomDocument::setContent > (QByteArray&, bool)' > /home/piero/work/qt- 2.3.10/include/qdom.h:278: error: candidates are: > bool > QDomDocument::setContent(const QCString&) > /home/piero/work/qt-2.3.10/include/qdom.h:279: error: bool > QDomDocument::setContent(const QByteArray&) > /home/piero/work/qt-2.3.10/include/qdom.h:280: error: bool > QDomDocument::setContent(const QString&) > /home/piero/work/qt-2.3.10/include/qdom.h:281: error: bool > QDomDocument::setContent(QIODevice*) > http.cc: In member function `QString HTTPProtocol::davError(int, > QString)': > http.cc:1647: error: no matching function for call to > `QDomDocument::setContent > (QByteArray&, bool)' > /home/piero/work/qt- 2.3.10/include/qdom.h:278: error: candidates are: > bool > QDomDocument::setContent(const QCString&) > /home/piero/work/qt-2.3.10/include/qdom.h:279: error: bool > QDomDocument::setContent(const QByteArray&) > /home/piero/work/qt-2.3.10/include/qdom.h:280: error: bool > QDomDocument::setContent(const QString&) > /home/piero/work/qt-2.3.10/include/qdom.h:281: error: bool > QDomDocument::setContent(QIODevice*) > http.cc: In member function `bool HTTPProtocol::readHeader()': > http.cc:3578: warning: comparison between signed and unsigned integer > expressions > http.cc: In member function `void HTTPProtocol::addEncoding(QString, > QStringList&)': > http.cc:3875: warning: assignment of negative value `-1' to `filesize_t' > http.cc:3875: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc : In member function `int HTTPProtocol::readChunked()': > http.cc:4114: warning: comparison between signed and unsigned integer > expressions > http.cc:4172: warning: assignment of negative value `-1' to `filesize_t' > http.cc:4172: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc: In member function `void HTTPProtocol::slotData(const > QByteArray&)': > http.cc:4228: warning: comparison between signed and unsigned integer > expressions > http.cc:4233: warning: assignment of negative value `-1' to `filesize_t' > http.cc:4233: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc:4249: warning: comparison between signed and unsigned integer > expressions > http.cc: In member function `bool HTTPProtocol::readBody(bool)': > http.cc:4348: warning: comparison between signed and unsigned integer > expressions > http.cc:4368: warning: assignment of negative value `-1' to `filesize_t' > http.cc:4368: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc:4395: warning: comparison between signed and unsigned integer > expressions > http.cc:4398: warning: assignment of negative value `-1' to `filesize_t' > http.cc:4398: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc:4403: warning: assignment of negative value `-1' to `filesize_t' > http.cc:4403: warning: argument of negative value `-1' to `long long > unsigned > int' > http.cc:4469: warning: comparison between signed and unsigned integer > expressions > > I hope it helps. > Thanks in advance. > > > 2008/1/21 Max Andruschenko < [email protected]>: > > > Could you send me log messages about an error? > > > > ----- Original Message ----- > > *From:* Piero Pezzin <[email protected]> > > *To:* For discussion of Konqueror/Embedded <[email protected]> > > *Sent:* Monday, January 21, 2008 1:01 PM > > *Subject:* Re: Problems building Konq/e with Qtopia Core > > > > Hello Max, thank you very much for your help. > > It worked! > > > > ...but now I have problems with the class http.cc. > > > > First of all, the line > > > > #include <qdom.h> > > > > was commented and there were problems with finding QDomElement and > > QDomDocument classes. So I uncommented that line, but now the problem is > > that we have calls to the function setContent with a bool parameter passed > > (line 746) > > > > multiResponse.setContent( m_bufWebDavData, true ); > > > > but qdom.h defines > > > > bool setContent( const QByteArray& text ); > > > > Another problem is that at line 902 there is a call to > > QDomElement::namespaceURI(), which is not defined in qdom.h. > > > > I recall that I'm using qt-2.3.10. Am I missing something? > > > > Thanks in advance and kind regards. > > > > > > 2008/1/21 Max Andruschenko < [email protected]>: > > > > > Hello friend! > > > > > > The solution for your problem is: > > > > > > open kextsock.h > > > comment the lines > > > #ifdef Q_OS_UNIX > > > and it's #endif > > > > > > That's all. > > > > > > Have a nice day! > > > > > > ----- Original Message ----- > > > *From:* Piero Pezzin <[email protected]> > > > *To:* For discussion of Konqueror/Embedded <[email protected]> > > > *Sent:* Friday, January 18, 2008 7:18 PM > > > *Subject:* Re: Problems building Konq/e with Qtopia Core > > > > > > Hello everyone. > > > After unnumbered attempts, I got some results: configure works fine > > > and make starts correctly. But it blocks at a certain point, complaining > > > about the file ftp.h, as you can see from the messages below: > > > > > > If /bin/sh ../../../libtool --silent --tag=CXX --mode=compile > > > arm-linux-g++ > > > -DHAVE_CONFIG_H -I. -I. -I../../.. > > > -I../../../konq-embed/kdesrc/kdecore > > > -I../../../konq-embed/kdesrc/kjs -I../../../konq-embed/kdesrc/kssl > > > -I../../../konq-embed/dropin -I../../../konq-embed/dropin/kio > > > -I../../../konq-embed/dropin/kssl -I../../../konq-embed/kdesrc > > > -I../../../konq-embed/kdesrc/kdecore > > > -I../../../konq-embed/kdesrc/kdecore/network > > > -I../../../konq-embed/kdesrc/kssl > > > -I../../../konq-embed/kdesrc/kssl > > > -I/home/piero/konq-embedded/include > > > -I/home/piero/work/qt-2.3.10/include > > > -I/home/piero/work/qtopia-free-2.2.0/qtopia/include/qtopia > > > -DQT_THREAD_SUPPORT -DQWS -D_REENTRANT -Wno-long-long -Wundef -ansi > > > -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion > > > -Wchar-subscripts > > > -Wall -W -Wpointer-arith -fno-builtin -g3 -fno-inline > > > -Wformat-security > > > -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions > > > -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT > > > -DQT_NO_ASCII_CAST -MT ftp.lo -MD -MP -MF ".deps/ftp.Tpo" -c -o > > > ftp.lo > > > ftp.cc; \ > > > then mv -f ".deps/ftp.Tpo" ".deps/ftp.Plo"; else rm -f > > > ".deps/ftp.Tpo"; exit > > > 1; fi > > > In file included from ftp.cc:26: > > > ftp.h:141: error: parse error before `{' token > > > ftp.h:154: error: ISO C++ forbids declaration of `m_server' with no > > > type > > > ftp.h:155: error: parse error before `}' token > > > ftp.h:157: error: destructors must be member functions > > > ftp.h: In function `void FtpSocket()': > > > ftp.h:157: error: `closeSocket' undeclared (first use this function) > > > ftp.h:157: error: (Each undeclared identifier is reported only once > > > for each > > > function it appears in.) > > > ftp.h: At global scope: > > > ftp.h:162: error: `void closeSocket()' used prior to declaration > > > ftp.h:169: error: non-member function `int server()' cannot have > > > `const' > > > method > > > qualifier > > > ftp.h:179: error: non-member function `int sock()' cannot have `const' > > > method > > > qualifier > > > ftp.h: In function `int sock()': > > > ftp.h:179: error: `fd' undeclared (first use this function) > > > ftp.h: At global scope: > > > ftp.h:184: error: non-member function `void debugMessage(const char*)' > > > cannot > > > have `const' method qualifier > > > ftp.h:189: error: non-member function `int errorMessage(int, const > > > char*)' > > > cannot have `const' method qualifier > > > ftp.h:199: error: non-member function `bool setSocketOption(int, > > > char*, > > > unsigned int)' cannot have `const' method qualifier > > > ftp.h: In function `int textRead()': > > > ftp.h:222: error: invalid use of `this' in non-member function > > > ftp.h: At global scope: > > > ftp.h:225: error: parse error before `private' > > > ftp.h:227: error: redefinition of `int m_server' > > > ftp.h:154: error: `int m_server' previously defined here > > > ftp.h:228: error: parse error before `}' token > > > ftp.h:590: error: syntax error before `*' token > > > ftp.h:595: error: syntax error before `*' token > > > ftp.cc:170: error: `pSock' was not declared in this scope > > > ftp.cc:171: error: `int FtpTextReader::textRead' is not a static > > > member of ` > > > class FtpTextReader' > > > > > > To me the file seems correct, but I can be wrong. I'm using > > > kdenox_snapshot_qt2_20070531, with qt-embedded 2.3.10 and qtopia 2.2.0 > > > . > > > > > > Any clue? > > > > > > Thanks in advance and kind regards. > > > > > > > > > On Jan 15, 2008 2:48 PM, Piero Pezzin <[email protected] > wrote: > > > > > > > Ok, thanks. If I'll fail with the building of Konq/e, I will wait > > > > for the next version of Qtopia. > > > > > > > > > > > > On Jan 15, 2008 2:12 PM, Luciano Montanaro <[email protected] > > > > > wrote: > > > > > > > > > Il Tuesday 15 January 2008 14:00:08 Piero Pezzin ha scritto: > > > > > > Thank you very much. > > > > > > So I can forget about qt and concentrate on qt/embedded and > > > > > qtopia. That's > > > > > > what I wanted to hear. There is a lot of confusion about this > > > > > topic.. > > > > > > > > > > > > Ok, I'm going to try. I suppose it won't be a pleasant work... > > > > > > > > > > Well, not exactly. Qt3 (at least Qt3.3) *used* to work correctly. > > > > > I think > > > > > there are a few issues with Qt3 and current SVN, but those should > > > > > be easy > > > > > enough to fix. What is not going to work is using Qtopia (Or Qt 4, > > > > > for that > > > > > matter). But Qt4.4 should ship with Webkit, so if you can wait (it > > > > > is > > > > > expected in Q1 2008, so within a few months now) that could > > > > > provide you with > > > > > a good browser component to start off. > > > > > > > > > > Luciano > > > > > > > > > > > > > > > > > 2008/1/15 Max Andruschenko <[email protected]>: > > > > > > > Hi dear friend. > > > > > > > > > > > > > > I can say you a definitly wrong. > > > > > > > You can compile Konqueror embedded only for qtopia version > > > > > 2.2.0 or > > > > > > > 2.2.2. So, first you should to do is to get qt embedded > > > > > version 2.3.10 or > > > > > > > 2.3.12. Compile it with your cross compiler, at the end you > > > > > should get > > > > > > > qte-mt multithread library. And you should compile it with > > > > > rtti support, > > > > > > > by default it compiles without rtti. > > > > > > > Then compile qtopia version 2.2.0 with library qte-mt. If > > > > > during the > > > > > > > building you get qte library, remove it from the folder. Also > > > > > you should > > > > > > > compile qtopia with rtti support. > > > > > > > Then compile konqueror. > > > > > > > > > > > > > > Good luck! > > > > > > > > > > > > > > > _______________________________________________ > > > > > konq-e mailing list > > > > > [email protected] > > > > > https://mail.kde.org/mailman/listinfo/konq-e > > > > > > > > > > > > > > > > ------------------------------ > > > > > > _______________________________________________ > > > konq-e mailing list > > > [email protected] > > > https://mail.kde.org/mailman/listinfo/konq-e > > > > > > > > > _______________________________________________ > > > konq-e mailing list > > > [email protected] > > > https://mail.kde.org/mailman/listinfo/konq-e > > > > > > > > ------------------------------ > > > > _______________________________________________ > > konq-e mailing list > > [email protected] > > https://mail.kde.org/mailman/listinfo/konq-e > > > > > > _______________________________________________ > > konq-e mailing list > > [email protected] > > https://mail.kde.org/mailman/listinfo/konq-e > > > > > _______________________________________________ konq-e mailing list [email protected] https://mail.kde.org/mailman/listinfo/konq-e