Fw: Kolab Service Does not Start/No Emails Can be Sent/Received

Skale,

The cyrus-imapd daemon seems to be up but sick:


● cyrus-imapd.service - Cyrus-imapd IMAP/POP3 email server
   Loaded: loaded (/usr/lib/systemd/system/cyrus-imapd.service; enabled; vendor preset: disabled)
   Active: active (running) since Fri 2021-04-30 18:34:43 UTC; 20h ago
  Process: 1151 ExecStartPre=/usr/lib/cyrus-imapd/cyr_systemd_helper start (code=exited, status=0/SUCCESS)
 Main PID: 1191 (cyrus-master)
   CGroup: /system.slice/cyrus-imapd.service
           ├─1191 /usr/lib/cyrus-imapd/cyrus-master
           ├─1206 idled
           ├─1215 lmtpd
           ├─1216 notifyd
           ├─1836 ptloader
           ├─6360 imapd -s
           ├─6614 imapd -s
           ├─6615 imapd -s
           ├─6699 imapd -s
           ├─6705 imapd -s
           ├─6797 imapd -s
           ├─6798 imapd -s
           ├─6799 imapd -s
           └─6806 imapd -s

May 01 15:32:42 xxx imaps[6615]: starttls: TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits reused) no authentication
May 01 15:32:42 xxx ptloader[1836]: ldap_simple_bind() failed 32 (No such object)
May 01 15:32:42 xxx imaps[6615]: ptload(): bad response from ptloader server: ptsmodule_connect() failed
May 01 15:32:42 xxx imaps[6615]: ptload failed: but canonified [email protected] -> [email protected]
May 01 15:32:42 xxx imaps[6615]: badlogin: [127.0.0.1] [email protected] LOGIN+TLS SASL(-13): authentication failure: checkpass failed
May 01 15:32:45 xxx imaps[6360]: starttls: TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits reused) no authentication
May 01 15:32:45 xxx ptloader[1836]: ldap_simple_bind() failed 32 (No such object)
May 01 15:32:45 xxx imaps[6360]: ptload(): bad response from ptloader server: ptsmodule_connect() failed
May 01 15:32:45 xxx imaps[6360]: ptload failed: but canonified [email protected] -> [email protected]
May 01 15:32:45 xxx imaps[6360]: badlogin: [127.0.0.1] [email protected] LOGIN+TLS SASL(-13): authentication failure: checkpass failed


What might be leading to these SASL/ldap errors after the yum update? 


Thanks,
Bob


On Saturday, May 1, 2021, 5:05:08 AM PDT, Skale, Franz <[email protected]> wrote: 





Hi Bob,
it seems, that the cyrus imapd failed to start.
It the central component. Wihtout a running and working imapd, no 
service could function !
So check the imapd logfiles and report back.
Btw. every service can  be put in debug mode using the "-d" flag by 
changing the /etc/default/* defaults file.
For cyrus, you might wann try:
# Set this to 1 or higher to enable debugging on cyrmaster
CYRUS_VERBOSE=1

Best regards
Franz

On 2021-05-01 02:00, Bob Jones wrote:
> Hello Kolab Community,
> 
> Our Kolab server has gone into some kind of funk, and we can't seem to
> receive/send any emails. The server is on CentOS 7/Kolab 16 and was
> recently updated (was healthy before the update).
> 
> The relevant kolab packages updated were:
>    Updated: kolab-freebusy-1.1.2-3.63.el7.kolab_16.noarch
>    Updated: kolab-syncroton-2.3.19-1.3.el7.kolab_16.noarch
>    Updated: roundcubemail-skin-kolab-0.4.1-10.19.el7.kolab_16.noarch
>    Updated:
> roundcubemail-plugin-redundant_attachments-1.4.11.4-1.2.el7.kolab_16.noarch
>    Updated:
> roundcubemail-plugin-newmail_notifier-1.4.11.4-1.2.el7.kolab_16.noarch
>    Updated: 
> roundcubemail-plugin-contextmenu-3.0-14.57.el7.kolab_16.noarch
>    Updated: guam-0.9.9-2.8.el7.kolab_16.x86_64
>    Updated: kolab-webadmin-3.2.15-3.1.el7.kolab_16.noarch
>    Updated: wallace-0.8.19-1.8.el7.kolab_16.noarch
>    Updated: cyrus-imapd-2.5.15.28-1.22.el7.kolab_16.x86_64
>    Updated: kolab-server-0.8.19-1.8.el7.kolab_16.noarch
>    Updated: kolab-saslauthd-0.8.19-1.8.el7.kolab_16.noarch
>   Updated: postfix-kolab-0.8.19-1.8.el7.kolab_16.noarch
> 
> 
> kolabd does not start. Here is what I see from status:
> 
> systemctl status kolabd.service
> 
>    ● kolabd.service - Kolab Groupware Server.
>       Loaded: loaded (/usr/lib/systemd/system/kolabd.service; enabled;
> vendor preset: disabled)
>       Active: failed (Result: exit-code) since Fri 2021-04-30 18:58:33
> UTC; 1h 44min ago
>      Process: 1944 ExecStart=/usr/sbin/kolabd $FLAGS --pid-file
> /run/kolabd/kolabd.pid (code=exited, status=0/SUCCESS)
> Main PID: 1946 (code=exited, status=2)
> 
>    Apr xxx.yyy.zzz systemd[1]: Starting Kolab Groupware Server....
>    Apr xxx.yyy.zzz systemd[1]: kolabd.service: Supervising process
> 1946 which is not our child. We'll most likely not notice when it
> exits.
>    Apr xxx.yyy.zzz systemd[1]: Started Kolab Groupware Server..
>    Apr xxx.yyy.zzz systemd[1]: kolabd.service: main process exited,
> code=exited, status=2/INVALIDARGUMENT
>    Apr xxx.yyy.zzz systemd[1]: Unit kolabd.service entered failed 
> state.
>    Apr xxx.yyy.zzz systemd[1]: kolabd.service failed.
> 
> 
> kolab lm reports
> 
>    cyruslib.CYRUSError: (99, 'LIST', 'Connection is not authenticated')
> 
> 
> kolab-saslauthd seems to be running but testsaslauthd -u cyrus-admin
> -p fails with:
> 
>    0: NO "authentication failed"
> 
> dirsrv seems to be running (ns-slapd). Email clients are failing to
> log in perhaps because of (from /var/log/maillog):
> 
>    xxxxxx imaps[2258]: SASL Password verification failed
>    xxxxxx imaps[2258]: badlogin: [127.0.0.1] unknown
> AUTHENTICATE+PLAIN+TLS [SASL(-13): authentication failure: Password
> verification failed]
> 
> pykolab seems to be reporting many messages of the form:
> 
>    2021-04-XX 23:52:45,266 pykolab.auth ERROR [1289] Invalid DN,
> username and/or password for 'uid=kolab-service,ou=Special
> Users,dc=abc,dc=com'.          
>    2021-04-XX 23:52:45,277 pykolab.auth ERROR [1289] Invalid DN,
> username and/or password for 'uid=yyy,ou=People,dc=abc,dc=com'.
>    2021-04-XX 23:52:50,130 pykolab.auth ERROR [1289] Invalid DN,
> username and/or password for 'uid=kolab-service,ou=Special
> Users,dc=abc,dc=com'.
>    2021-04-XX 23:52:50,142 pykolab.auth ERROR [1289] Invalid DN,
> username and/or password for 'uid=zzzzzz,ou=People,dc=abc,dc=com'.
>    2021-04-XX 23:52:54,054 pykolab.auth ERROR [1476] Invalid DN,
> username and/or password for 'uid=kolab-service,ou=Special
> Users,dc=abc,dc=com'.
>    2021-04-XX 23:52:54,055 pykolab.auth ERROR [1476] Invalid DN,
> username and/or password for 'uid=kolab-service,ou=Special
> Users,dc=abc,dc=com'.
> 
> What could be going wrong? Any help is appreciated.
> 
> Bob

> 
>   
> _______________________________________________
> users mailing list
> [email protected]
> https://lists.kolab.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
https://lists.kolab.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
https://lists.kolab.org/mailman/listinfo/users