Re: 1000+ file project load times?

Hi Eric,

> are there any users here with projects files in this size who can offer 
> feedback on your start up times with this size project? Specifically
> I'm curious if your are experincing normal load times expected in
> seconds or abnormal load times in minutes. Please post your CPU, RAM
> distribution and KDE/Quanta version.

I'm on OpenBSD 4.2 MP amd64 (dmesg follows); KDE/Quanta 3.5.7 and have
exactly 11800 files in my .webprj (1.1Mb in size) file, accessible by sftp
(compression turned on) on yet another OpenBSD 4.2 host.

Opening the project takes a few seconds to d/l the project file, a few
seconds to parse it. I don't automatically load any files or projects
when starting up Quanta. I'm ready to go in about 5 seconds.

My laptop (Debian testing; KDE/Quanta 3.5.9) is much slower (power
management) but still I am done within 10 seconds on the same project.

Oh and OpenBSD is not a 'distribution'. We don't all run Linux. :-P

Let me know if you need any more details.

HTH... Nico

The dmesg, then:

OpenBSD 4.2-stable (GENERIC.MP) #1: Sat Apr 12 12:05:16 CEST 2008
    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145972224 (2046MB)
avail mem = 2072690688 (1976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (36 entries)
bios0: vendor Phoenix Technologies, LTD version "V1.4" date 06/27/2007
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7253
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP SSDT HPET MCFG APIC 
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2300.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu0: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative cpu0: apic clock running at
199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Athlon
(tm) 64 X2 Dual Core Processor 4400+, 2299.98 MHz cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu1: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative ioapic0 at mainbus0 apid 2
pa 0xfec00000, version 3, 24 pins ioapic0: misconfigured as apic 0,
remapped to apid 2 ioapic1 at mainbus0 apid 3 pa 0xfecc0000, version 3,
24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (PEXG)
acpiprt2 at acpi0: bus 3 (PEX0)
acpiprt3 at acpi0: bus 0 (PEX1)
acpiprt4 at acpi0: bus 0 (PEX2)
acpiprt5 at acpi0: bus 0 (PEX3)
acpiprt6 at acpi0: bus 0 (P2PE)
acpiprt7 at acpi0: bus 0 (PE5C)
acpiprt8 at acpi0: bus 0 (PE6C)
acpiprt9 at acpi0: bus 4 (P2PB)
acpiprt10 at acpi0: bus 128 (PCI1)
acpiprt11 at acpi0: bus 128 (PE5C)
acpiprt12 at acpi0: bus 128 (PE6C)
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpibtn at acpi0 not configured
cpu0: PowerNow! K8 2299 MHz: speeds: 2300 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8M890 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8M890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M890 Host" rev 0x00
"VIA K8M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7 "VIA K8M890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce 7300 GS" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
pciide0 at pci0 dev 15 function 0 "VIA VT8237A SATA" rev 0x80: DMA
pciide0: using apic 2 int 21 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD321KJ>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S203D, SB00> SCSI0
5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility pciide1: channel 0 disabled (no drives) pciide1: channel 1
disabled (no drives) uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB"
rev 0xa0: apic 2 int 20 (irq 10) uhci1 at pci0 dev 16 function 1 "VIA
VT83C572 USB" rev 0xa0: apic 2 int 22 (irq 11) uhci2 at pci0 dev 16
function 2 "VIA VT83C572 USB" rev 0xa0: apic 2 int 21 (irq 5) uhci3 at
pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0xa0: apic 2 int 23 (irq
10) ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int
21 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0: VIA EHCI root
hub, rev 2.00/1.00, addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8237A
ISA" rev 0x00 iic0 at viapm0
iic0: addr 0x2f 00=c2 01=0f 02=00 03=01 04=07 05=00 06=18 07=00 08=00
14=14 15=62 16=02 17=05 pchb6 at pci0 dev 17 function 7 "VIA VT8251
VLINK" rev 0x00 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c:
apic 2 int 23 (irq 10), address 00:19:db:c6:8e:24 rlphy0 at vr0 phy 1:
RTL8201L 10/100 PHY, rev. 1 pchb7 at pci0 dev 19 function 0 "VIA VT8237A
PCI-PCI" rev 0x00 ppb3 at pci0 dev 19 function 1 "VIA VT8237A PCI-PCI"
rev 0x00 pci4 at ppb3 bus 4
re0 at pci4 dev 5 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), apic 2 int 18 (irq 5), address 00:e0:4c:69:84:26 rgephy0 at re0
phy 7: RTL8169S/8110S PHY, rev. 3 pchb8 at pci0 dev 24 function 0 "AMD
AMD64 HyperTransport" rev 0x00 pchb9 at pci0 dev 24 function 1 "AMD AMD64
Address Map" rev 0x00 pchb10 at pci0 dev 24 function 2 "AMD AMD64 DRAM
Cfg" rev 0x00 pchb11 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev
0x00 usb1 at uhci0: USB revision 1.0
uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: VIA UHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627EHF
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 2, iclass
3/1 ums0 at uhidev0: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: Microsoft Comfort Curve Keyboard 2000, rev 2.00/1.73, addr 3,
iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 2 configuration 1 interface 1
uhidev2: Microsoft Comfort Curve Keyboard 2000, rev 2.00/1.73, addr 3,
iclass 3/0 uhidev2: 1 report ids
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b