[sdk/kdesrc-build/docbook_historied_per_file] doc: Add a feature to kdesvn-build contributed by Tom Albers, --resume-after.

Git commit 8a270eeabc2258b895f78ddcca7e0c5449ce42f8 by Michael Pyne.
Committed on 13/02/2010 at 04:12.
Pushed by ashark into branch 'docbook_historied_per_file'.

Add a feature to kdesvn-build contributed by Tom Albers, --resume-after.

It's just like --resume-from, except that if you've already verified that your fix
allows the module to build and install there's no reason to run kdesvn-build through
the same process again. Using --resume-after tells kdesvn-build to pick up with the
module after the one you've supplied (which would normally be the module that failed).

CCMAIL:[email protected]

svn path=/trunk/KDE/kdesdk/doc/scripts/kdesvn-build/; revision=1089384

Original commit: 4506f185
https://invent.kde.org/sdk/kdesrc-build/-/commit/4506f18570e209a96441278c1443e66ec67810fb

M  +20   -1    doc/cmdline/supported-cmdline-params.docbook
M  +1    -0    doc/index.docbook
M  +12   -3    doc/using-kdesvn-build/advanced-features.docbook

https://invent.kde.org/sdk/kdesrc-build/-/commit/8a270eeabc2258b895f78ddcca7e0c5449ce42f8

diff --git a/doc/cmdline/supported-cmdline-params.docbook b/doc/cmdline/supported-cmdline-params.docbook
index 08c5757e..f068282f 100644
--- a/doc/cmdline/supported-cmdline-params.docbook
+++ b/doc/cmdline/supported-cmdline-params.docbook
@@ -204,7 +204,26 @@ This option is used to resume the build starting from the given module, which
 should be the next option on the command line. This option implies <link
 linkend="cmdline-no-src"><parameter>--no-src</parameter></link>. You should not
 specify other module names on the command line.
-</para></listitem>
+</para>
+<para>See also: <xref linkend="cmdline-resume-after"/> and <xref
+linkend="resuming-failed"/>. You would prefer to use this command line option
+if you have fixed the build error and want &kdesvn-build; to complete the
+build.</para></listitem>
+</varlistentry>
+
+<varlistentry id="cmdline-resume-after">
+<term><parameter>--resume-after</parameter></term>
+<listitem><para>
+This option is used to resume the build starting after the given module, which
+should be the next option on the command line. This option implies <link
+linkend="cmdline-no-src"><parameter>--no-src</parameter></link>. You should not
+specify other module names on the command line.
+</para>
+<para>See also: <xref linkend="cmdline-resume-from"/> and <xref
+linkend="resuming-failed"/>. You would prefer to use this command line option
+if you have fixed the build error and have also built and installed the module
+yourself, and want &kdesvn-build; to start again with the next
+module.</para></listitem>
 </varlistentry>
 
 <varlistentry id="cmdline-rc-file">
diff --git a/doc/index.docbook b/doc/index.docbook
index c1fdfe55..62b1b51a 100644
--- a/doc/index.docbook
+++ b/doc/index.docbook
@@ -46,6 +46,7 @@
   <!ENTITY cmd-nice '<link linkend="cmdline-nice">--nice</link>'>
   <!ENTITY cmd-ignore-modules '<link linkend="cmdline-ignore-modules">--ignore-modules</link>'>
   <!ENTITY cmd-resume-from '<link linkend="cmdline-resume-from">--resume-from</link>'>
+  <!ENTITY cmd-resume-after '<link linkend="cmdline-resume-after">--resume-after</link>'>
   <!ENTITY cmd-reconfigure '<link linkend="cmdline-reconfigure">--reconfigure</link>'>
   <!ENTITY cmd-refresh-build '<link linkend="cmdline-refresh-build">--refresh-build</link>'>
   <!ENTITY introduction SYSTEM "introduction/index.docbook">
diff --git a/doc/using-kdesvn-build/advanced-features.docbook b/doc/using-kdesvn-build/advanced-features.docbook
index c034de01..79fef174 100644
--- a/doc/using-kdesvn-build/advanced-features.docbook
+++ b/doc/using-kdesvn-build/advanced-features.docbook
@@ -319,10 +319,10 @@ end global
 <para>You can tell &kdesvn-build; to start building from a different module
 than it normally would. This can be useful when a set of modules failed, or
 if you canceled a build run in the middle. You can control this using the
-&cmd-resume-from; option.</para>
+&cmd-resume-from; option and the &cmd-resume-after; option.</para>
 
-<note><para>Using &cmd-resume-from; will skip the source code update.</para>
-</note>
+<note><para>Using either of the resume options will skip the source code
+update.</para> </note>
 
 <informalexample>
 <para>Resuming the build starting from kdebase:</para>
@@ -332,6 +332,15 @@ if you canceled a build run in the middle. You can control this using the
 </screen>
 </informalexample>
 
+<informalexample>
+<para>Resuming the build starting after kdebase (in case you manually fixed
+the issue and installed the module yourself):</para>
+
+<screen>
+<prompt>%</prompt> <userinput><command>kdesvn-build</command> <option>--resume-after=<replaceable>kdebase</replaceable></option></userinput>
+</screen>
+</informalexample>
+
 </sect3>
 
 <sect3 id="ignoring-modules">