Re: K3b issues resmgr communication failure and crashes PCLOS

On Monday 23 July 2007 08:42:24 Dimitris Kalamaras wrote:
> Στις 21-07-2007, ημέρα Σαβ, και ώρα 12:59 +0200, ο/η Sebastian Trüg
>
> έγραψε:
> > Could you please provide a crash backtrace?
>
> Thanks for the answer. How do I get the backtrace? Can I find a complete
> log somewhere in my disk?

normally KDE pops up a dialog when an application crashes. But even better is 
to run k3b through gdb:

gdb k3b
run --nofork

>
> --Dimitris
>
> > On Tuesday 03 July 2007 13:44:02 dimitris kalamaras wrote:
> > > Hello people,
> > >
> > > I found some references to this problem on the net, but no exact
> > > answer. I thought maybe you can help.
> > >
> > > Here it goes: my PC running PCLinuxOS 2007 crashed repeatedly in the
> > > last couple of days. Didnt know why, but I thought that it had
> > > something to do with the DVDR device. When I ejected a DVD (but not
> > > always) the computer would stop responding.
> > > Today, I burned a DVDRW, circa 4G. When K3B finished, it ejected the
> > > DVD and the computer crashed again. After rebooting, I checked the
> > > /var/log/messages and saw these messages printed just before the crash:
> > >
> > > Jul  3 12:00:42 ypatia k3b: resmgr: communication failure: No such file
> > > or directory
> > > Jul  3 11:01:14 ypatia last message repeated 49 times
> > > Jul  3 11:01:34 ypatia last message repeated 30 times
> > > Jul  3 11:02:35 ypatia last message repeated 59 times
> > > Jul  3 11:03:36 ypatia last message repeated 57 times
> > > Jul  3 11:04:37 ypatia last message repeated 60 times
> > > Jul  3 11:05:38 ypatia last message repeated 61 times
> > > ...
> > > Jul  3 11:22:57 ypatia last message repeated 60 times
> > > Jul  3 11:23:58 ypatia last message repeated 58 times
> > > Jul  3 11:24:59 ypatia last message repeated 60 times
> > > Jul  3 11:26:01 ypatia last message repeated 60 times
> > > Jul  3 11:27:02 ypatia last message repeated 61 times
> > > Jul  3 11:28:03 ypatia last message repeated 61 times
> > > Jul  3 11:28:34 ypatia last message repeated 30 times
> > >
> > > I started K3B again, and the message was repeated. I terminated the
> > > application - the message stopped. Then I installed resmgr and started
> > > resmgrd. But now, when I start K3B, I have a constant flow of messages
> > > of this form (they never stop!):
> > >
> > > ul  3 12:57:24 ypatia resmgr[4434]: disconnect from dimitris
> > > Jul  3 12:57:24 ypatia resmgr[4434]: accepted connection from user
> > > dimitris Jul  3 12:57:24 ypatia k3b: resmgr: server response code 502
> > > Jul  3 12:57:24 ypatia resmgr[4434]: disconnect from dimitris
> > > Jul  3 12:57:24 ypatia resmgr[4434]: accepted connection from user
> > > dimitris Jul  3 12:57:24 ypatia k3b: resmgr: server response code 502
> > > Jul  3 12:57:24 ypatia resmgr[4434]: disconnect from dimitris
> > > Jul  3 12:57:24 ypatia resmgr[4434]: accepted connection from user
> > > dimitris Jul  3 12:57:24 ypatia k3b: resmgr: server response code 502
> > > Jul  3 12:57:24 ypatia resmgr[4434]: disconnect from dimitris
> > > Jul  3 12:57:24 ypatia resmgr[4434]: accepted connection from user
> > > dimitris Jul  3 12:57:24 ypatia k3b: resmgr: server response code 502
> > > Jul  3 12:57:24 ypatia resmgr[4434]: disconnect from dimitris
> > > Jul  3 12:57:24 ypatia resmgr[4434]: accepted connection from user
> > > dimitris Jul  3 12:57:24 ypatia k3b: resmgr: server response code 502
> > > Jul  3 12:57:24 ypatia resmgr[4434]: disconnect from dimitris
> > > Jul  3 12:57:24 ypatia resmgr[4434]: accepted connection from user
> > > dimitris Jul  3 12:57:24 ypatia k3b: resmgr: server response code 502
> > > Jul  3 12:57:24 ypatia resmgr[4434]: disconnect from dimitris
> > > Jul  3 12:57:25 ypatia resmgr[4434]: accepted connection from user
> > > dimitris Jul  3 12:57:25 ypatia k3b: resmgr: server response code 502
> > > Jul  3 12:57:25 ypatia resmgr[4434]: disconnect from dimitris
> > >
> > >
> > > Do you know anything about this? Is it safe to have all these messages
> > > printed in my messages log repeatedly?
> > >
> > > I am using K3B 1.0.1. These are elements from my dmesg, for your
> > > convenience:
> > >
> > > ATIIXP: IDE controller at PCI slot 0000:00:14.1
> > > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> > > ATIIXP: chipset revision 0
> > > ATIIXP: not 100% native mode: will probe irqs later
> > >     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
> > >     ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> > > Probing IDE interface ide0...
> > > hda: WDC WD800JB-00CRA1, ATA DISK drive
> > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > > Probing IDE interface ide1...
> > > hdc: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive
> > > hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
> > > ide1 at 0x170-0x177,0x376 on irq 15
> > > hda: max request size: 128KiB
> > > hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63,
> > > UDMA(100)
> > > hda: cache flushes not supported
> > >  hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 >
> > > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> > >
> > >
> > >
> > > Thanks in advance,
> > >
> > >
> > >
> > > --Dimitris
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2005.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > K3b-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/k3b-user



-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/
_______________________________________________
K3b-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/k3b-user