Re: Re: SIGSEGV in 0.8.3

Hello Dirk,

the cl output from the cvs version doesn't look different to 0.8.3 either. I can't identify
a library related debug message or such (maybe its just me). I've doublechecked that i used the
binary from the cvs tree:

driver bttv, version 0x0000090f[wirth@pc001 wirth]$ kdetv -v
Qt: 3.1.2
KDE: 3.1.4-7 Red Hat
kdetv: post 0.8.3

And here is the output anyway:

[wirth@pc001 wirth]$ kdetv
Try to open v4l2 vbi device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.12 2002/11/30 02:37:18 mschimek Exp $Opened /dev/vbi
Try to open v4l2 (2002-10) vbi device, libzvbi interface rev.
$Id: io-v4l2k.c,v 1.4 2003/02/16 18:58:07 mschimek Exp $Opened /dev/vbi
/dev/vbi (BT878 video (Leadtek WinFast 20PCI:01:09.0) is a v4l2 vbi device,
Current scanning system is 625
Querying current vbi parameters... success
VBI capture parameters granted: format 59455247, 35468950 Hz, 2048 bpl, offs 244, F1 7+16, F2 319+16, flags 00000000
Nyquist check passed
Request decoding of services 0x60000c7f
Will decode services 0x0000041f
Using streaming interface
Fifo initialized
Requesting streaming i/o buffers
Try to open v4l vbi device, libzvbi interface rev.
$Id: io-v4l.c,v 1.9 2002/11/30 02:37:18 mschimek Exp $Opened /dev/vbi
Driver name 'BT878 video (Leadtek WinFast 20'
Attempt to guess the videostandard
Driver supports VIDIOCGTUNER: 0
Videostandard is PAL/SECAM
/dev/vbi (BT878 video (Leadtek WinFast 20) is a v4l vbi device
Hinted video standard 0, guessed 625
Driver supports VIDIOCGVBIFMT, guessed videostandard 625
Accept current vbi parameters
Guessed videostandard 625
Nyquist check passed
Will decode services 0x0000041f
Warning: no read select, reading will block
Capture buffer allocated
Successful opened /dev/vbi (BT878 video (Leadtek WinFast 20)
kdetv: could not open config files /home/user/wirth/.lircrc and /etc/lircrc
kdetv: Datei oder Verzeichnis nicht gefunden
QDateTime::fromString: Parameter out of range.

Is there a special switch to enable further debugging? Btw., there is no difference
in behavior between compiling with / without lirc support, and the last output
"QDateTime::...." appears just after startup at a time at which the app runs smoothly.

Maybe we should keep further conversation private, i don't think that too much people
on the list are interested in my problem....

Ciao,
-- 
Helmut Wirth

[email protected]
-------------------------------------------------------------
bison GmbH                         phone +49 89 / 50 03 91-14
Planegger Str. 16                  fax   +49 89 / 50 03 91-17
D-82110 Germering                  http://www.bison-soft.de/
-------------------------------------------------------------