Re: How to get kwintv going with a vcr

Configure your TV ap for television, NTSC if in the US, put a tape in the 
VCR and scan for channels. The only one you'll get will probably be chan 3. 
Select chan 3 and watch your VCR.

On 8/18/05, Steve <[email protected]> wrote:
> 
> Hi;
> 
> I know this sounds lame, but I have never owed a VCR.
> 
> I have a PC, with a haugepauge TV card, kwintv 3.3*, and an old vcr a
> friend gave me so I can see some old tapes another friend gave me.
> 
> I hooked a line ( for video ) from the video out on the vcr to the
> "line in" on my tv card.
> 
> Nothing happens when I bring up kwintv.
> 
> Is there something else I need to do to kwintv or the vcr?
> 
> Thanks much in advance for the help
> 
> Steve
> 
> Steve
> http://www.geocities.com/beforewisdom/
> 
> "The internet may be a good substitute for television, but is it a good 
> substitute for what television replaced?"
> _______________________________________________
> kwintv mailing list
> [email protected]
> https://mail.kde.org/mailman/listinfo/kwintv
> 



-- 
____________
George Fragos
[email protected]
73 East Swift Ave.
Fresno CA 93704

_______________________________________________
kwintv mailing list
[email protected]
https://mail.kde.org/mailman/listinfo/kwintv