Re: Kdevelop and gdb 10.0.1
Milian Wolff <[email protected]> Fri, 11 Dec 2020 15:32:44 +0100
| Newsgroups | gmane.comp.kde.users.kdevelop |
|---|---|
| Message-ID | <123670613.S9gUk6AO3u@milian-workstation> |
On Freitag, 11. Dezember 2020 14:43:59 CET Alvin wrote: > On Thu, Dec 10, 2020 at 9:19 AM Milian Wolff <[email protected]> wrote: > > On Donnerstag, 10. Dezember 2020 14:03:28 CET René J.V. Bertin wrote: > > > On Thursday December 10 2020 13:30:20 Milian Wolff wrote: > > > >We had to change the system to create appimages, so I would appreciate > > > >if > > > >someone could test this new 5.6.1 appimage: > > > > > > > >https://lmnm.duckdns.org/s/TwjLWnQsQG8tD43 > > > > > > > >Does it work on your platform/distro? Ideally test something > > > >non-KDE/arch > > > >based, as that was tested by me already :) > > > > > > It works on my KUbuntu 14.04 frankenOS, though with a sh*load of debug > > > output (tip of the iceberg below). > > > > Thanks for testing. > > > > > I don't know if you're obliged to include FreeType and FontConfig in > > > this > > > new AppImage; it wasn't yet the case with 5.6.0 - and people like me who > > > have those libraries installed with the Infinality+Ultimate patches can > > > notice a significant font rendering quality w.r.t. their system > > > applications. > > > > I quite frankly don't care about such little things. People should only > > use > > the AppImage if they have to, but if things look a bit odd then so be it. > > If you want something nice, user a modern distro that gives you a proper > > package directly. > > > > > OTOH you *could* include the required libdbus; it will work > > > just fine with an older dbus daemon. > > > > > > /tmp/.mount_KDevel6UAxF6/AppRun.wrapped: > > > /lib/x86_64-linux-gnu/libdbus-1.so.3: no version information available > > > (required by /tmp/.mount_KDevel6UAxF6/usr/lib/libQt5WebEngineCore.so.5) > > > /tmp/.mount_KDevel6UAxF6/AppRun.wrapped: > > > /lib/x86_64-linux-gnu/libdbus-1.so.3: no version information available > > > (required by /tmp/.mount_KDevel6UAxF6/usr/lib/libpulse.so.0) > > > /tmp/.mount_KDevel6UAxF6/AppRun.wrapped: > > > /lib/x86_64-linux-gnu/libdbus-1.so.3: no version information available > > > (required by /tmp/.mount_KDevel6UAxF6/usr/lib/libpulsecommon-10.0.so) > > > > Bundling the old libdbus makes problems on newer distros, so I explicitly > > remove that. Quite frankly, 14.04 is far too old for me to care - it's EOL > > already after all. > > > > > QXcbIntegration: Cannot create platform OpenGL context, neither GLX nor > > > EGL > > > > Yes, I've seen that too, but feel reluctant of bundling GLX/EGL libs hm. > > Maybe I have to, the old appimage also does it. > > > > > are enabled qt.widgets.painting: Marking QRect(0,0 880x502) of > > > QWidget(0xb96960, name="qt_scrollarea_viewport") dirty with > > > QWidgetRepaintManager::UpdateLater qt.widgets.painting: Sending update > > > request to KDevelop::SessionChooserDialog(0x7fff0e0576c0) with > > > QWidgetRepaintManager::UpdateLater qt.widgets.painting: Marking > > > QRect(0,0 > > > 880x502) of QWidget(0xb96960, name="qt_scrollarea_viewport") dirty with > > > QWidgetRepaintManager::UpdateLater qt.widgets.painting: Marking > > > QRect(0,0 > > > 900x600) of KDevelop::SessionChooserDialog(0x7fff0e0576c0) dirty with > > > QWidgetRepaintManager::UpdateLater qt.widgets.painting: Marking > > > QRect(0,0 > > > 80x23) of QPushButton(0xfd1740) dirty with > > > QWidgetRepaintManager::UpdateLater > > > > Disable these in your ~/.config/QtProject/qtlogging.ini, they shouldn't be > > enabled by default. > > > > Bye > > > > -- > > Milian Wolff > > [email protected] > > http://milianw.de > > Thank you for generating the AppImage. I tried it and had no issues on both: > 1. Ubuntu 20.10 using GNOME 3.38.1 (X11), gdb 9.2 > 2. openSUSE Tumbleweed 20201209 KDE Plasma 5.20.4, KDE Frameworks > 5.76.0 and Qt 5.15.2, gdb 10.1 > > I have been using the KDevelop AppImages in Ubuntu for some time as I > was too impatient for Ubuntu to upgrade the repo. I haven't bothered > trying the Applmages before in openSUSE as I use KDE on that machine. > > FWIW, since it was mentioned this bug was fixed but just not > officially released, I went ahead and installed KDevelop from > openSUSE's Unstable KDE extra repo (version 5.6.40 20201210) which I > believe is a nightly build. I've been using that for a few days > without any issues (no crashing, able to debug, etc.). Thanks for the confirmation Alvin! Cheers -- Milian Wolff [email protected] http://milianw.de
signature.asc
(application/pgp-signature, 833 B)
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEezawi1aUvUGg3A1+8zYW/HGdOX8FAl/TgwwACgkQ8zYW/HGd OX81oxAAuaNshYQb50q0pUFxutxos3SAfJL8zWUrSb5vHQXR+sESojU4KJPEu1ZQ eYqm82SAKhVg65SXrsm0TTNeojRpTG8e18XlGHOewhneVDp3e+W4E58mWXPW+EVU QeWqTKfxFvn7YWRolZRq8Wu/FTuzdktF69Gf+2gaiRU2rXQMuVC0BpD1rh6IFGj6 8Y6EL3xDzFjABdI8lfJl6gnIQye5fRpe4aWYbaM/VxS0hna/WlVZQHgiFW9l0noS aG/GlE4NIJKzMYWgMQUTb0XGc8tpsLYOlfNbg0a+nXy2iskevJ/M39D8ZTkZbsNN g241uJkYugbucOvuHTJ/lER28gN+qOYa2p6RPm62K3kJuIc5BWfJpxIhhUlPMjj9 SU2UIFhddfmG4A14Co2NjqU7M4oTMxkB3ZWDuDhq4eACtHaSXKxu05PlCRcsW4d8 4JbhZB+kntxh3LEi8KqyKHiK9TTRY6be1EMLk5Rwp+XFRjKzOAkwk/d4zfeKAsyk RFcL4otYUGuQOPeXj13zOxJOVMGDxjIJB6MrdbXGxC9nn5yZ8Jh+J5M+DoPTkU5V 6Ws7HhftrW9aQemXERZGxGhPGj95CV/Z9/iUqvXnkrbcGU09/Ly5ssCAiavBWPLj yC5fYg9+w01vdpRs00JXljmueVf3vji8f0ewLvGE4j3Y/+dipO0= =5uSH -----END PGP SIGNATURE-----