kmail error
Ulf von Barth <[email protected]>
| Newsgroups | gmane.comp.kde.users.pim |
|---|---|
| Organization | Lund University |
| Message-ID | <[email protected]> |
Dear KDE users, I recently "upgraded" to KDE 4.4.5 just to find that kmail does not work properly any more on my new AMD dual core (x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+) computer running Gentoo Linux (2.6.34-gentoo-r6-cyprien-FTT). When I open kmail I get error messages from Akonadi (see enclosed file). If I ignore the message I can use kmail as I did before the "upgrade" but if I click away the message, kmail crashes. I laso discovered that my machine is now about a factor of ten slower than before the upgrade. This is most likely due to new software automatically installed by my latest KDE such as nepomuk and strigi. Needless to say, I have no use for akonadi, nepomuk, or strigi! How can I solve this problem? Best Regards, vonbarth -- --------------------------------------------------------------------------------- Prof. Ulf von Barth Tel: 46-46-2229069 Dept. of Physics, FTT Group Fax: 46-46-2224416 Lund University Mobile: 46-705-975952 Sölvegatan 14 A E-mail: [email protected] S-22362 LUND, SWEDEN -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ KDE PIM users mailing list Subscription management: https://mail.kde.org/mailman/listinfo/kdepim-users
kmail_err_101007
(text/plain, 20 KB)
Akonadi Server Self-Test Report =============================== Test 1: SUCCESS -------- Database driver found. Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system. File content of '/users/barth/.config/akonadi/akonadiserverrc': [%General] Driver=QMYSQL SizeThreshold=4096 ExternalPayload=false [QMYSQL] Name=akonadi User= Password= Options="UNIX_SOCKET=/users/barth/.local/share/akonadi/db_misc/mysql.socket" ServerPath=/usr/sbin/mysqld StartServer=true Host= [Debug] Tracer=null Test 2: SUCCESS -------- MySQL server found. Details: You currently have configured Akonadi to use the MySQL server '/usr/sbin/mysqld'. Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld', its locations varies depending on the distribution. Test 3: SUCCESS -------- MySQL server is executable. Details: MySQL server found: /usr/sbin/mysqld Ver 5.0.90-log for pc-linux-gnu on x86_64 (Gentoo Linux mysql-5.0.90-r2) Test 4: SUCCESS -------- MySQL server log contains no errors. Details: The MySQL server log file '<a href='/users/barth/.local/share/akonadi/db_data/mysql.err'>/users/barth/.local/share/akonadi/db_data/mysql.err</a>' does not contain any errors or warnings. File content of '/users/barth/.local/share/akonadi/db_data/mysql.err': InnoDB: The InnoDB memory heap is disabled InnoDB: use atomic builtins. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. 101007 12:20:51 InnoDB: Retrying to lock the first data file InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to lock ./ibdata1, error: 11 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. InnoDB: Unable to loc Test 5: SUCCESS -------- MySQL server default configuration found. Details: The default configuration for the MySQL server was found and is readable at <a href='/usr/share/config/akonadi/mysql-global.conf'>/usr/share/config/akonadi/mysql-global.conf</a>. File content of '/usr/share/config/akonadi/mysql-global.conf': # # Global Akonadi MySQL server settings, # These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf # # Based on advice by Kris Köhntopp <[email protected]> # [mysqld] skip_grant_tables skip_networking # strict query parsing/interpretation # TODO: make Akonadi work with those settings enabled #sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat #sql_mode=strict_trans_tables # use InnoDB for transactions and better crash recovery default_storage_engine=innodb # case-insensitive table names, avoids trouble on windows lower_case_table_names=1 character_set_server=latin1 collation_server=latin1_general_ci table_cache=200 thread_cache_size=3 log_bin=mysql-bin expire_logs_days=3 #sync_bin_log=0 # error log file name, relative to datadir log_error=mysql.err log_warnings=2 # log all queries, useful for debugging but generates an enormous amount of data #log=mysql.full # log queries slower than n seconds, log file name relative to datadir (for debugging only) #log_slow_queries=mysql.slow #long_query_time=1 # log queries not using indices, debug only, disable for production use #log_queries_not_using_indexes=1 # maximum blob size max_allowed_packet=32M max_connections=256 # makes sense when having the same query multiple times # makes no sense with prepared statements and/or transactions query_cache_type=0 query_cache_size=0 innodb_file_per_table=1 innodb_log_buffer_size=1M innodb_additional_mem_pool_size=1M # messure database size and adjust # SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema"); innodb_buffer_pool_size=80M # size of average write burst, keep Innob_log_waits small, keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables) innodb_log_file_size=64M innodb_flush_log_at_trx_commit=2 Test 6: SKIP -------- MySQL server custom configuration not available. Details: The custom configuration for the MySQL server was not found but is optional. Test 7: SUCCESS -------- MySQL server configuration is usable. Details: The MySQL server configuration was found at <a href='/users/barth/.local/share/akonadi/mysql.conf'>/users/barth/.local/share/akonadi/mysql.conf</a> and is readable. File content of '/users/barth/.local/share/akonadi/mysql.conf': # # Global Akonadi MySQL server settings, # These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf # # Based on advice by Kris Köhntopp <[email protected]> # [mysqld] skip_grant_tables skip_networking # strict query parsing/interpretation # TODO: make Akonadi work with those settings enabled #sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat #sql_mode=strict_trans_tables # use InnoDB for transactions and better crash recovery default_storage_engine=innodb # case-insensitive table names, avoids trouble on windows lower_case_table_names=1 character_set_server=latin1 collation_server=latin1_general_ci table_cache=200 thread_cache_size=3 log_bin=mysql-bin expire_logs_days=3 #sync_bin_log=0 # error log file name, relative to datadir log_error=mysql.err log_warnings=2 # log all queries, useful for debugging but generates an enormous amount of data #log=mysql.full # log queries slower than n seconds, log file name relative to datadir log_slow_queries=mysql.slow long_query_time=1 # log queries not using indices, debug only, disable for production use log_queries_not_using_indexes=1 # maximum blob size max_allowed_packet=32M max_connections=256 # makes sense when having the same query multiple times # makes no sense with prepared statements and/or transactions query_cache_type=0 query_cache_size=0 innodb_file_per_table=1 innodb_log_buffer_size=1M innodb_additional_mem_pool_size=1M # messure database size and adjust # SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema"); innodb_buffer_pool_size=80M # size of average write burst, keep Innob_log_waits small, keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables) innodb_log_file_size=64M innodb_flush_log_at_trx_commit=2 Test 8: SUCCESS -------- akonadictl found and usable Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully. Result: Akonadi 1.3.1 Test 9: ERROR -------- Akonadi control process not registered at D-Bus. Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup. Test 10: ERROR -------- Akonadi server process not registered at D-Bus. Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup. Test 11: ERROR -------- Nepomuk search service not registered at D-Bus. Details: The Nepomuk search service is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup. Test 12: SKIP -------- Protocol version check not possible. Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements. Test 13: ERROR -------- No resource agents found. Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents /usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share:/usr/local/share:/usr/share:/usr/share/gdm', make sure this includes all paths where Akonadi agents are installed to. Directory listing of '/usr/share/akonadi/agents': birthdaysresource.desktop contactsresource.desktop icalresource.desktop imapresource.desktop kabcresource.desktop kcalresource.desktop knutresource.desktop kolabproxyresource.desktop localbookmarksresource.desktop maildirresource.desktop maildispatcheragent.desktop mboxresource.desktop microblog.desktop mtdummyresource.desktop nepomukcalendarfeeder.desktop nepomukcontactfeeder.desktop nepomuktagresource.desktop nntpresource.desktop notesresource.desktop pop3resource.desktop vcarddirresource.desktop vcardresource.desktop Directory listing of '/usr/share/akonadi/agents': birthdaysresource.desktop contactsresource.desktop icalresource.desktop imapresource.desktop kabcresource.desktop kcalresource.desktop knutresource.desktop kolabproxyresource.desktop localbookmarksresource.desktop maildirresource.desktop maildispatcheragent.desktop mboxresource.desktop microblog.desktop mtdummyresource.desktop nepomukcalendarfeeder.desktop nepomukcontactfeeder.desktop nepomuktagresource.desktop nntpresource.desktop notesresource.desktop pop3resource.desktop vcarddirresource.desktop vcardresource.desktop Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/local/share:/usr/share:/usr/share/gdm' Test 14: ERROR -------- Current Akonadi server error log found. Details: The Akonadi server did report error during startup into <a href='/users/barth/.local/share/akonadi/akonadiserver.error'>/users/barth/.local/share/akonadi/akonadiserver.error</a>. File content of '/users/barth/.local/share/akonadi/akonadiserver.error': "[ 0: akonadiserver(_Z11akBacktracev+0x39) [0x40bb19] 1: akonadiserver() [0x40c05a] 2: /lib/libc.so.6(+0x324d0) [0x7f956f1224d0] 3: /lib/libc.so.6(gsignal+0x35) [0x7f956f122445] 4: /lib/libc.so.6(abort+0x181) [0x7f956f123941] 5: /usr/lib64/qt4/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x85) [0x7f95702d8bd5] 6: /usr/lib64/qt4/libQtCore.so.4(+0x71d7d) [0x7f95702d8d7d] 7: /usr/lib64/qt4/libQtCore.so.4(_Z6qFatalPKcz+0x95) [0x7f95702d8f15] 8: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer25startMysqlDatabaseProcessEv+0x119e) [0x7f957074b13e] 9: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0x2e0) [0x7f9570750430] 10: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServerC1EP7QObject+0x78) [0x7f9570750738] 11: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer8instanceEv+0x47) [0x7f9570751a77] 12: akonadiserver(main+0x2e1) [0x406af1] 13: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f956f10eba6] 14: akonadiserver() [0x406719] ] " Test 15: ERROR -------- Previous Akonadi server error log found. Details: The Akonadi server did report error during its previous startup into <a href='/users/barth/.local/share/akonadi/akonadiserver.error.old'>/users/barth/.local/share/akonadi/akonadiserver.error.old</a>. File content of '/users/barth/.local/share/akonadi/akonadiserver.error.old': "[ 0: akonadiserver(_Z11akBacktracev+0x39) [0x40bb19] 1: akonadiserver() [0x40c05a] 2: /lib/libc.so.6(+0x324d0) [0x7f14ac71e4d0] 3: /lib/libc.so.6(gsignal+0x35) [0x7f14ac71e445] 4: /lib/libc.so.6(abort+0x181) [0x7f14ac71f941] 5: /usr/lib64/qt4/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x85) [0x7f14ad8d4bd5] 6: /usr/lib64/qt4/libQtCore.so.4(+0x71d7d) [0x7f14ad8d4d7d] 7: /usr/lib64/qt4/libQtCore.so.4(_Z6qFatalPKcz+0x95) [0x7f14ad8d4f15] 8: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer25startMysqlDatabaseProcessEv+0x119e) [0x7f14add4713e] 9: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0x2e0) [0x7f14add4c430] 10: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServerC1EP7QObject+0x78) [0x7f14add4c738] 11: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer8instanceEv+0x47) [0x7f14add4da77] 12: akonadiserver(main+0x2e1) [0x406af1] 13: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f14ac70aba6] 14: akonadiserver() [0x406719] ] " Test 16: SUCCESS -------- No current Akonadi control error log found. Details: The Akonadi control process did not report any errors during its current startup. Test 17: SUCCESS -------- No previous Akonadi control error log found. Details: The Akonadi control process did not report any errors during its previous startup.