RE: WTK can't connect to server

Hi Sandy,
 
I've most often seen this when firewall settings are blocking the port
and/or the address.
 
(Occasionally seen it with remote DSL users when their DSL modem's ip
address/mask conflicts with our internal network addressing and packets
get routed wrongly at the client.)
 
Regards,
  Bryce Stenberg
  Harness Racing New Zealand Inc.
  IT Department. 
 


________________________________

	From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected]
	Sent: Friday, 26 August 2005 12:27 a.m.
	To: [email protected]
	Subject: [fourjs-users] WTK can't connect to server
	
	

	Hi 
	
	I'm getting the error below when attempting to connect to
server. 
	
	        wtcp client term0 to <IP address>, service 513 failed:
CONNECT FAIL none 
	
	Regards, 
	
	Sandy Sawmy 
	MCS Development Ltd 
	
	
====================================================
DISCLAIMER:
Confidential or privileged information may be contained in this message.
If you are not the intended recipient of the message, please notify the
sender immediately.

Opinions, conclusions and other information expressed in this message
are those of the sender, else otherwise stated by the individual sender,
to be those of MCS Ltd, to whom no liability shall be attached
whatsoever.
*****************************************************