Re: having a hard time compling moto_0.18 on freebsd

Oh, heh, yeah I had that issue on my linux box to, I just removed the
line was all, no big issue I thought.  Now I know to report that stuff I
guess ;).

As far as compiling AFTER the make clean, it still fails.  I'll get out
my C books and such, but I doubt it like hell if I'll figure anything
out on it.  
The error after the make clean:

bison -d moto.y
flex -I moto.l
gcc -I. -I/opt/jax/moto_0_18_0 -DHAVE_RCONFIG_H
-I/opt/jax/moto_0_18_0/include -DHAVE_CONFIG_H -g -O2 -Wall -c lex.yy.c
-o lex.yy.o
gcc -I. -I/opt/jax/moto_0_18_0 -DHAVE_RCONFIG_H
-I/opt/jax/moto_0_18_0/include -DHAVE_CONFIG_H -g -O2 -Wall -c
moto.tab.c -o moto.tab.o
moto.tab.c: In function `yyparse':
moto.tab.c:3129: warning: implicit declaration of function `yylex'
moto.y:652: syntax error before `}'
moto.y:653: syntax error before `}'
moto.y:720: syntax error before `}'
moto.y:722: syntax error before `}'
moto.y:900: syntax error before `}'
moto.y:901: syntax error before `}'
moto.y:1223: syntax error before `}'
moto.y:1225: syntax error before `}'
moto.y:1227: syntax error before `}'
moto.y:1233: syntax error before `}'
moto.y:1257: syntax error before `static'
moto.y:1279: `p' undeclared (first use in this function)
moto.y:1279: (Each undeclared identifier is reported only once
moto.y:1279: for each function it appears in.)
moto.y:1279: `env' undeclared (first use in this function)
moto.y:1281: `value' undeclared (first use in this function)
moto.y:1285: `svs' undeclared (first use in this function)
moto.y:1293: syntax error before `static'
moto.y:1299: `n' undeclared (first use in this function)
moto.y:1318: syntax error before `static'
moto.y:1328: warning: unreachable code at beginning of switch statement
moto.y:1385: warning: control reaches end of non-void function
moto.y: At top level:
moto.y:78: warning: `nullcell' used but never defined
moto.y:79: warning: `b' used but never defined
moto.y:80: warning: `c' used but never defined
moto.y:91: warning: `IVSMetaInfo' used but never defined
moto.y:92: warning: `SVSMetaInfo' used but never defined
moto.y:93: warning: `UCMetaInfo' used but never defined
*** Error code 1

Stop in /opt/jax/moto_0_18_0/src/moto.
*** Error code 1

Stop in /opt/jax/moto_0_18_0.


So it's identical.  I'l try upgrading gcc and see if that helps.



Oh, as far as joining the devel-list and becoming your BSD tester, sure,
I'll do that.  Be my first time to help on a project, that's rather
exciting.  Hell I have some a couple of them, Im sure I can do something
;)

thanks,
Jack


On Tue, 2003-03-04 at 14:31, David Hakim wrote:
> Wow ... I'm surprised that ever worked! Thanks for finding this :) 
> After removing the second
> 
> %token <ivs> ECONTINUE
> 
> on line 188 of moto.y you should just be able to 'make clean' and then 
> 'make' and everything should be fine. The reason you need to 'make 
> clean' first is that bison writes out a moto.tab.h file that uses that 
> %token information which is included by the lexer which had already 
> been built before you continued the make.
> 
> Thanks again for finding this one!
> -Dave
> 
> On Tuesday, March 4, 2003, at 04:07  PM, Jack wrote:
> 
> > Every runs fine with this config:
> >
> > ./configure --with-apache --with-mysql=/usr/local
> >
> > make give this:
> > moto.y:194.14-22: type redeclaration for ECONTINUE
> > *** Error code 1
> >
> > Okay, so i remove the extra type declaration, and run make again, and I
> > get...
> >
> > touch timestamp;
> > Making all in src/codex
> > Making all in src/moto
> > bison -d moto.y
> > flex -I moto.l
> > gcc -I. -I/opt/jax/moto_0_18_0 -DHAVE_RCONFIG_H
> > -I/opt/jax/moto_0_18_0/include -DHAVE_CONFIG_H -g -O2 -Wall -c lex.yy.c
> > -o lex.yy.o
> > gcc -I. -I/opt/jax/moto_0_18_0 -DHAVE_RCONFIG_H
> > -I/opt/jax/moto_0_18_0/include -DHAVE_CONFIG_H -g -O2 -Wall -c
> > moto.tab.c -o moto.tab.o
> > moto.tab.c: In function `yyparse':
> > moto.tab.c:3129: warning: implicit declaration of function `yylex'
> > moto.y:652: syntax error before `}'
> > moto.y:653: syntax error before `}'
> > moto.y:720: syntax error before `}'
> > moto.y:722: syntax error before `}'
> > moto.y:900: syntax error before `}'
> > moto.y:901: syntax error before `}'
> > moto.y:1223: syntax error before `}'
> > moto.y:1225: syntax error before `}'
> > moto.y:1227: syntax error before `}'
> > moto.y:1233: syntax error before `}'
> > moto.y:1257: syntax error before `static'
> > moto.y:1279: `p' undeclared (first use in this function)
> > moto.y:1279: (Each undeclared identifier is reported only once
> > moto.y:1279: for each function it appears in.)
> > moto.y:1279: `env' undeclared (first use in this function)
> > moto.y:1281: `value' undeclared (first use in this function)
> > moto.y:1285: `svs' undeclared (first use in this function)
> > moto.y:1293: syntax error before `static'
> > moto.y:1299: `n' undeclared (first use in this function)
> > moto.y:1318: syntax error before `static'
> > moto.y:1328: warning: unreachable code at beginning of switch statement
> > moto.y:1385: warning: control reaches end of non-void function
> > moto.y: At top level:
> > moto.y:78: warning: `nullcell' used but never defined
> > moto.y:79: warning: `b' used but never defined
> > moto.y:80: warning: `c' used but never defined
> > moto.y:91: warning: `IVSMetaInfo' used but never defined
> > moto.y:92: warning: `SVSMetaInfo' used but never defined
> > moto.y:93: warning: `UCMetaInfo' used but never defined
> > *** Error code 1
> >
> > Stop in /opt/jax/moto_0_18_0/src/moto.
> > *** Error code 1
> >
> > Stop in /opt/jax/moto_0_18_0.
> >
> >
> > Okay, I don't know what to do here.  I looked at line 652 where it was
> > moaning about it, and that looks fine to me, so I don't know.
> >
> > I thought maybe when I removed that ECONTINUE type declaration, I
> > screwed something up, so I removed the motodir, and untarred the moto
> > distribution again, and ended up with the same results.
> >
> > Which way is out?
> >
> > Thanks,
> > Jack
> >
> >