Re: For "make doc": -enable-gtk2, but "lablgtk" is used
Oliver Bandel <[email protected]> Thu, 05 Nov 2015 17:12:59 +0100
| Newsgroups | gmane.comp.lang.ocaml.lib.net.devel |
|---|---|
| Message-ID | <20151105171259.Horde.rbwXLH8QUser9G5PVbOjNeg@webmail.in-berlin.de> |
Hi,
ok, I misinterpreted the last part of confugure-script.
It was mentioned the DEFAULTS were -disable-<...>
not that the defaults could be overwritten with -disable-<...>
So I used now
./configure \
-enable-pcre \
-enable-full-pcre \
-enable-gtk \
-enable-gtk2 \
-enable-tcl \
-enable-gnutls \
-enable-gssapi \
-enable-zip \
-enable-apache \
-enable-nethttpd \
Result: configure worked fine and "make" worked fine,
but "make doc" failed again:
====================================================
make[1]: Leaving directory
'/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
make[1]: Entering directory
'/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
ocamlfind ocamlc -g -I ../../src/netstring -package "unix " -w -3-25
-c netgzip.mli
File "netgzip.mli", line 5, characters 19-34:
Error: Unbound module Gzip
../../Makefile.rules:120: recipe for target 'netgzip.cmi' failed
make[1]: *** [netgzip.cmi] Error 2
make[1]: Leaving directory
'/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
Makefile:40: recipe for target 'doc' failed
make: *** [doc] Error 2
====================================================
So, even though configure worked and make worked,
make doc failed.
If there is missing a module (Gzip), I would assume,
that aomething before "make doc" would fail or mention the problem.
Somehow it does not.
More ideas on that?
Ciao,
Oliver
Zitat von Gerd Stolpmann <[email protected]> (Thu, 05 Nov 2015
10:47:31 +0100)
> I create the documentation all the time. You need a fully configured
> ocamlnet, with all bells and whistles. Which makes sense, because the
> docs should be complete.
>
> Gerd
>
> Am Mittwoch, den 04.11.2015, 16:34 +0100 schrieb Oliver Bandel:
>> Well, the main problem was:
>>
>> ocamlfind: Package `lablgtk' not found
>>
>>
>> Now I tried with svn-stuff.
>>
>> The configure seems to have different defaults.
>> -enable-gtk2 seems not to be necessary.
>>
>> So I did just "./configure".
>> Then "make doc"
>>
>> Result:
>>
>> ============================================================================================
>> ~/tmp/OCamlnet-Docs/trunk/code >make doc
>> for pkg in src/*/.; do \
>> test ! -f $pkg/Makefile -o -f $pkg/doc-ignore || \
>> { ( cd $pkg && make -f Makefile.pre generate ) || exit; \
>> ( cd $pkg && make -f Makefile.pre depend ) || exit; \
>> ( cd $pkg && make ocamldoc.dump ) || exit; \
>> }; \
>> done
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> make[2]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> sed -e 's/@VERSION@/4.0.4/' \
>> -e 's/@AUTHDHREQS@//' \
>> -e 's/@PREFERRED_CGI_PKG@//' \
>> -e 's/@REGEXP_PROVIDER@/str/' \
>> -e 's/@COMPAT_PCRE_PROVIDER@//' \
>> -e 's/@ZIP_PROVIDER@//' \
>> META.in >META
>> make[2]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> ocamlfind ocamldep *.ml *.mli >depend || { rm -f depend; exit 1; }
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> ocamlfind ocamlc -g -I ../../src/equeue -I ../../src/netsys -package
>> "unix" -w -3-25 -c uq_tcl.mli
>> File "uq_tcl.mli", line 3, characters 5-11:
>> Error: Unbound module Equeue
>> ../../Makefile.rules:120: recipe for target 'uq_tcl.cmi' failed
>> make[1]: *** [uq_tcl.cmi] Error 2
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/equeue-tcl'
>> Makefile:40: recipe for target 'doc' failed
>> make: *** [doc] Error 2
>> ============================================================================================
>>
>>
>> Then directly afterwards I compiled the software, before starting
>> again a "make doc".
>> Software builds.
>>
>> Result of "make doc", after is does some work:
>> ============================================================================================
>> [...]
>> ocamlfind ocamlc -g -I ../../src/netsys -I ../../src/netstring
>> -package "unix unix" -w -3-25 -c nettls_gnutls.ml
>> ocamlfind ocamldoc -dump ocamldoc.dump -stars -I ../../src/netsys -I
>> ../../src/netstring -package "unix unix" nettls_gnutls_bindings.mli
>> nettls_nettle_bindings.mli nettls_gnutls.mli || { rm -f ocamldoc.dump;
>> exit 1; }
>> Warning: Module type Netsys_crypto_types.DIGESTS not found
>> Warning: Module type Netsys_crypto_types.SYMMETRIC_CRYPTO not found
>> Warning: Module type Netsys_crypto_types.TLS_PROVIDER not found
>> Warning: Module or module type Netsys_crypto_types.TLS_PROVIDER not found
>> Warning: Element Netsys_types.memory not found
>> Warning: Element Netsys_types not found
>> Warning: Element Netsys_types not found
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/nettls-gnutls'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> make[2]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> make[2]: Nothing to be done for 'realgenerate'.
>> make[2]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> make[1]: 'depend' is up to date.
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> ocamlfind ocamldoc -dump ocamldoc.dump -stars -I ../../src/netstring
>> -package "unix" netunidata.mli || { rm -f ocamldoc.dump; exit 1; }
>> Warning: Element Netconversion not found
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netunidata'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> make[2]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> sed -e 's/@VERSION@/4.0.4/' \
>> -e 's/@AUTHDHREQS@//' \
>> -e 's/@PREFERRED_CGI_PKG@//' \
>> -e 's/@REGEXP_PROVIDER@/str/' \
>> -e 's/@COMPAT_PCRE_PROVIDER@//' \
>> -e 's/@ZIP_PROVIDER@//' \
>> META.in >META
>> make[2]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> ocamlfind ocamldep *.ml *.mli >depend || { rm -f depend; exit 1; }
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> make[1]: Entering directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> ocamlfind ocamlc -g -I ../../src/netstring -package "unix " -w -3-25
>> -c netgzip.mli
>> File "netgzip.mli", line 5, characters 19-34:
>> Error: Unbound module Gzip
>> ../../Makefile.rules:120: recipe for target 'netgzip.cmi' failed
>> make[1]: *** [netgzip.cmi] Error 2
>> make[1]: Leaving directory
>> '/home/oliver/tmp/OCamlnet-Docs/trunk/code/src/netzip'
>> Makefile:40: recipe for target 'doc' failed
>> make: *** [doc] Error 2
>> ~/tmp/OCamlnet-Docs/trunk/code >
>> ============================================================================================
>>
>>
>> So it's not possible to generate the docs from the svn-stuff, even
>> though the lib itself can be build.
>>
>> Ciao,
>> Oliver
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Zitat von Gerd Stolpmann <[email protected]> (Wed, 04 Nov 2015
>> 10:56:44 +0100)
>>
>> > Try it with a checked-out version of ocamlnet:
>> >
>> > svn co https://godirepo.camlcity.org/svn/lib-ocamlnet2/trunk ocamlnet
>> >
>> > Obviously the file src/equeue-gtk1/doc-ignore is missing in the tarball.
>> >
>> > Gerd
>> >
>> >
>> > Am Freitag, den 30.10.2015, 22:44 +0100 schrieb Oliver Bandel:
>> >> Hello,
>> >>
>> >> my main goal was, to get the documentation as pdf.
>> >>
>> >> So I tried the target "doc" with "make doc", to see what happens.
>> >>
>> >> The process failed with a message, that "lablgtk" is unknown.
>> >> I tried with "-enable-gtk2" (after using a fresh source dir to be sure
>> >> about this problem).
>> >>
>> >> But "lablgtk" is used anyway for the "make doc" and the stuff
>> fails again.
>> >>
>> >>
>> >>
>> >> Here is the output from "make doc":
>> >>
>> >>
>> >>
>> =================================================================================================
>> >> ocamlnet-4.0.4> make doc
>> >> for pkg in src/*/.; do \
>> >> test ! -f $pkg/Makefile -o -f $pkg/doc-ignore || \
>> >> { ( cd $pkg && make -f Makefile.pre generate ) || exit; \
>> >> ( cd $pkg && make -f Makefile.pre depend ) || exit; \
>> >> ( cd $pkg && make ocamldoc.dump ) || exit; \
>> >> }; \
>> >> done
>> >> make[1]: Entering directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> make[2]: Entering directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> sed -e 's/@VERSION@/4.0.4/' \
>> >> -e 's/@AUTHDHREQS@//' \
>> >> -e 's/@PREFERRED_CGI_PKG@//' \
>> >> -e 's/@REGEXP_PROVIDER@/str/' \
>> >> -e 's/@COMPAT_PCRE_PROVIDER@//' \
>> >> -e 's/@ZIP_PROVIDER@//' \
>> >> META.in >META
>> >> make[2]: Leaving directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> make[1]: Leaving directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> make[1]: Entering directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> make[1]: Leaving directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> make[1]: Entering directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> ocamlfind ocamlc -g -I ../../src/equeue -I ../../src/netsys -package
>> >> "unix lablgtk" -pp "../../tools/cppo-0.9.4/cppo -D GTK1" -w -3-25 -c
>> >> uq_gtk_helper.ml
>> >> ocamlfind: Package `lablgtk' not found
>> >> ../../Makefile.rules:117: recipe for target 'uq_gtk_helper.cmo' failed
>> >> make[1]: *** [uq_gtk_helper.cmo] Error 2
>> >> make[1]: Leaving directory
>> >> '/home/oliver/AUR4/ocamlnet/src/ocamlnet-4.0.4/src/equeue-gtk1'
>> >> Makefile:40: recipe for target 'doc' failed
>> >> make: *** [doc] Error 2
>> >> ocamlnet-4.0.4>
>> >>
>> =================================================================================================
>> >>
>> >> Any ideas on that?
>> >>
>> >> Ciao,
>> >> Oliver
>> >>
>> >>
>> >>
>> ------------------------------------------------------------------------------
>> >> _______________________________________________
>> >> Ocamlnet-devel mailing list
>> >> [email protected]
>> >> https://lists.sourceforge.net/lists/listinfo/ocamlnet-devel
>> >
>> > --
>> > ------------------------------------------------------------
>> > Gerd Stolpmann, Darmstadt, Germany [email protected]
>> > My OCaml site: http://www.camlcity.org
>> > Contact details: http://www.camlcity.org/contact.html
>> > Company homepage: http://www.gerd-stolpmann.de
>> > ------------------------------------------------------------
>>
>>
>>
>
> --
> ------------------------------------------------------------
> Gerd Stolpmann, Darmstadt, Germany [email protected]
> My OCaml site: http://www.camlcity.org
> Contact details: http://www.camlcity.org/contact.html
> Company homepage: http://www.gerd-stolpmann.de
> ------------------------------------------------------------
------------------------------------------------------------------------------