Re: Properly installing Bioperl - Ubuntu - Git

Shane McCoy <[email protected]>
Newsgroups gmane.comp.lang.perl.bio.general
Message-ID <CAEzGp2KnOkN1cW2PPjD3j1Fhuc8YJAGjaRAAhYhNdwo8yEmj9Q@mail.gmail.com>
Hey Chris!
Thanks for the update. I don't believe i'm using the master, i used: git
clone git://github.com/bioperl/bioperl-live.git
So the version is correct then? 1.006924 for the above git clone.
thanks for your time!
shane

On Fri, Jan 16, 2015 at 3:30 PM, Fields, Christopher J <
[email protected]> wrote:

>  I’ve uploaded a new version of Bundle::BioPerl to CPAN (this removes Ace
> and Bio::ASN1::EntrezGene).
>
>  One key thing: the ‘master’ branch on github is *not* the branch you
> want to check out from if you want stable code; you need the ‘v1.6.x’
> branch.  We’re splitting out repositories from the main distribution (about
> 4 or so now), so if you try to run a typical installation it may not work
> as Bio::Root will be missing.
>
>  chris
>
>  On Jan 16, 2015, at 10:42 AM, Liliana Maria Cano Mogrovejo <
> [email protected]> wrote:
>
>  Hi Chris,
>
>  Thanks for looking into this! I am also experiencing the same problem
> encountered by Shane.
>
>  Thanks,
>
>  Lili
>
>      Liliana Cano, PhD.
>  Postdoctoral Research Associate
>  Dept. Plant Pathology
>  North Carolina State University
>  Raleigh, NC 27695, USA.
>  Email: [email protected]
>  Phone: +1-919-513-1280
>  Mobile: +1-919-703-6147
>
>  https://twitter.com/ConchitaCano
> http://plantpathology.ces.ncsu.edu/profile/liliana-cano/
>
>  On Jan 16, 2015, at 11:30 AM, Shane McCoy <[email protected]>
> wrote:
>
>  Thanks Chris!
> appreciate you looking into this
> shane
>
> On Thu, Jan 15, 2015 at 11:32 AM, Fields, Christopher J <
> [email protected]> wrote:
>
>> Just an update on this; I contacted Chris D. and Bundle::BioPerl is now
>> on github:
>>
>>  https://github.com/bioperl/Bundle-BioPerl
>>
>>  I’ll work on pushing a new release up to CPAN, will post back when that
>> is done.
>>
>>  chris (f)
>>
>>  On Jan 14, 2015, at 2:14 PM, Fields, Christopher J <
>> [email protected]> wrote:
>>
>>  Bundle::BioPerl is out of date.  I’ll have to check in with Chris
>> Dagdigian to see if we can update that, as it’s not on github.
>>
>>  Unless you are using NCBI and the ‘gene’ database, you won’t need
>> Bio::ASN1::EntrezGene.  The latest CPAN releases for both should still
>> resolve the circular dependency though; not sure why you are running into
>> this problem.
>>
>>  The github master version should technically be ‘1.007000_001’ or
>> similar, not ‘1.006925’.   I’ll have a look at that.
>>
>>  chris
>>
>>  On Jan 13, 2015, at 5:23 PM, Shane McCoy <[email protected]>
>> wrote:
>>
>>  Hello!
>> Not too familiar w/ Bioperl and want to make sure i've properly installed
>> on my VM ubuntu 14.4 server w/ git.
>>  http://www.bioperl.org/wiki/BioPerl_Dependencies
>> http://www.bioperl.org/wiki/Using_Git
>>
>>  sudo apt-get update
>> sudo apt-get upgrade
>> sudo apt-get check
>> sudo apt-get autoclean
>>
>>  sudo apt-get install build-essential git gcc
>> sudo apt-get install libexpat1 expat
>> sudo apt-get install libgd-dev  (unable to locate libgd recommended on
>> gmod.org/wiki/BioPerl Dependencies Outside perl)
>> sudo apt-get install libssl-dev
>> sudo apt-get install libpq-dev
>> sudo apt-get install libdb-dev libperl-dev
>> sudo apt-get install libgd-gd2-perl
>> sudo apt-get install libxml2
>> sudo apt-get install libxml2-dev
>>
>>  Installed local::lib manually for perl modules. Set environment path
>> echo '[ $SHLVL -eq 1 ] && eval "$(perl -I$HOME/perl5/lib/perl5
>> -Mlocal::lib)"' >>~/.bashrc
>>
>>  cpan> install Bundle::CPAN (archive::zip failed? pff!)
>> cpan> install Bundle::BioPerl
>> Failed during this command:
>>  LDS/AcePerl-1.92.tar.gz                      : make_test NO
>>  CJFIELDS/Bio-ASN1-EntrezGene-1.70.tar.gz     : make_test NO
>>  CAPTTOFU/DBD-mysql-4.029.tar.gz              : writemakefile NO
>> '/usr/bin/perl Makefile.PL
>> and several more. missing packages etc and successfully installed except
>> the above 3. Don't think i need those.
>>
>>  sudo apt-get install libgd-gd2-perl
>>
>>  git clone https://github.com/bioperl/bioperl-live.git
>> cd bioperl-live
>> perl Build.PL --fails - needs more modules
>>
>>
>>  Configuring C/CJ/CJFIELDS/BioPerl-1.6.924.tar.gz with Build.PL
>> Checking prerequisites...
>>   recommends:
>>
>>  Algorithm::Munkres
>> Array::Compare
>> Bio::Phylo
>> Convert::Binary::C
>> GraphViz
>> HTML::TableExtract is not installed
>> PostScript::TextBlock is not installed
>> SOAP::Lite
>> Net::SSLeay Crypt::SSLeay IO::Socket::SSL
>> Sort::Naturally
>> XML::LibXML
>> DBD::Pg
>> DBD::SQLite
>> (all above installed via CPAN)
>>
>>  Checking optional features...
>> EntrezGene............disabled
>>   requires:
>>     ! Bio::ASN1::EntrezGene is not installed
>>  - starts installing bioperl
>> i let it run and it installed Bioperl fine via CPAN.  build OK.
>> Installed bio::asn1::entrezgene & bio::root::build
>> perl Build.PL
>> now needs Inline::C...
>> cpan>install Inline::C
>>  cd bioperl-live
>>  perl Build.PL -- fails. missing Manifest?
>> Build manifest
>> perl Build.PL --still fails
>> perl Build -- works
>> ./Build test --PASS
>> sudo ./Build install
>>
>>  Installed / passed tests OK.
>> Added;
>> export PERL5LIB="$HOME/bioperl-live:$PERL5LIB"
>> to .bashrc
>>
>>  So i've installed via CPAN which i didn't really want, but couldn't run
>> Build.PL w/o prereq Bio::ASN1::EntrezGene which starts installing bioperl.
>> What should i have done differently?
>> i still did Build w/ Git clone, but when i check Version i get 1.006924.
>> I thought the bioperl-live version was 1.006925? i set the environment
>> variable in bashrc for bioperl-live.
>> Ok, thanks for your time! Just want to make sure i'm doing this
>> correctly.
>> Shane
>>  _______________________________________________
>> Bioperl-l mailing list
>> [email protected]
>> http://mailman.open-bio.org/mailman/listinfo/bioperl-l
>>
>>
>>  _______________________________________________
>> Bioperl-l mailing list
>> [email protected]
>> http://mailman.open-bio.org/mailman/listinfo/bioperl-l
>>
>>
>>
>  _______________________________________________
> Bioperl-l mailing list
> [email protected]
> http://mailman.open-bio.org/mailman/listinfo/bioperl-l
>
>
>
>

_______________________________________________
Bioperl-l mailing list
[email protected]
http://mailman.open-bio.org/mailman/listinfo/bioperl-l
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.