Re: Need some help -- trying ot install Sybperl

I haven't had this problem....
I followed this sequence:

install Sybase::CTlib
install DBI
install DBD::Sybase

For DBI and DBD:: I ended up doing a manual 'make install' since the CPAN 
test reported failure though when I ran them manually they looked good.

Rob V.


----- Original Message ----- 
From: "William Bell" <[email protected]>
To: "Rob Verschoor" <[email protected]>
Cc: <[email protected]>
Sent: Saturday, May 26, 2007 00:37
Subject: Re: Need some help -- trying ot install Sybperl


>I have been following in your footsteps... I removed all instances of
> the DBI module from both vendor_perl and site_perl....
>
> I successfully (I think) reinstalled DBI 1.56 - all tests succeeded and
> the make install ran to completion....
>
> I then ran perl Makefile.PL for the DBD::Sybase package and it completes
> correctly... however when I run make test I get the following
> errors.....Any thoughts?
>
>
> [root@wmblin01 DBD-Sybase-1.08]# make test
> gcc -c  -I/opt/syblibs_15/OCS-15_0/include
> -I/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/auto/DBI
> -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
> -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -Wall
> -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
> --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic
> -fasynchronous-unwind-tables   -DVERSION=\"1.08\" -DXS_VERSION=\"1.08\"
> -fPIC "-I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE"   Sybase.c
> Sybase.c: In function 'XS_DBD__Sybase__db__isdead':
> Sybase.c:103: warning: unused variable 'ix'
> Sybase.c: In function 'XS_DBD__Sybase__db__date_fmt':
> Sybase.c:121: warning: unused variable 'ix'
> Sybase.xs: In function 'XS_DBD__Sybase__db_ping':
> Sybase.xs:83: warning: implicit declaration of function 'syb_ping'
> Sybase.xs: In function 'XS_DBD__Sybase__st_cancel':
> Sybase.xs:95: warning: implicit declaration of function 'syb_st_cancel'
> Sybase.c:157: warning: unused variable 'ix'
> Sybase.c: In function 'XS_DBD__Sybase__st_ct_get_data':
> Sybase.c:175: warning: unused variable 'ix'
> Sybase.c: In function 'XS_DBD__Sybase__st_ct_data_info':
> Sybase.c:205: warning: unused variable 'ix'
> Sybase.c: In function 'XS_DBD__Sybase__st_ct_send_data':
> Sybase.c:240: warning: unused variable 'ix'
> Sybase.c: In function 'XS_DBD__Sybase__st_ct_prepare_send':
> Sybase.c:260: warning: unused variable 'ix'
> Sybase.c: In function 'XS_DBD__Sybase__st_ct_finish_send':
> Sybase.c:278: warning: unused variable 'ix'
> Sybase.xsi: In function 'XS_DBD__Sybase__db_disconnect':
> Sybase.xsi:277: error: invalid lvalue in assignment
> Sybase.xsi: In function 'XS_DBD__Sybase__db_DESTROY':
> Sybase.xsi:336: error: invalid lvalue in assignment
> make: *** [Sybase.o] Error 1
>
>
>
> On Fri, 2007-05-25 at 15:40 +0200, Rob Verschoor wrote:
>> There seems to be something wrong with today....
>> I managed to install Sybase::CTlib correctly with the hitns from 
>> Michael,
>> so my next attempt is DBD::Sybase. Here I get a compilation error about 
>> a
>> missing 'my_perl' symbol. I've googled and searched in the mailing list
>> archive but I cannot find an answer so far.
>>
>> In the dialog I chose not to use chained mode, and as recommended to 
>> use
>> the normal libraries (instead of the threaded ones).
>>
>> Any hints much appreciated!
>>
>> Rob V.
>> [email protected]
>>
>>
>>
>> cpan[1]> install DBD::Sybase
>>
>> ...
>> ...
>>
>> Checking if your kit is complete...
>> Looks good
>> Using DBI 1.32 installed in
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI
>> Writing Makefile for DBD::Sybase
>> Could not read '/root/.cpan/build/DBD-Sybase-1.08-FdCImL/META.yml'.
>> Falling back to other methods to determine prerequisites
>> cp dbd-sybase.pod blib/lib/DBD/dbd-sybase.pod
>> cp Sybase.pm blib/lib/DBD/Sybase.pm
>> /usr/bin/perl -p -e "s/~DRIVER~/Sybase/g" <
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver.xst
>>  > Sybase.xsi
>> /usr/bin/perl /usr/lib/perl5/5.8.0/ExtUtils/xsubpp  -typemap
>> /usr/lib/perl5/5.8.0/ExtUtils/typemap  Sybase.xs > Sybase.xsc && mv
>> Sybase.xsc Sybase.c
>> gcc -c  -I/opt/sybase1501/OCS-15_0/include -DNO_CHAINED_TRAN=1 -I/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI
>>  -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing
>>  -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm
>>  -O2 -g -pipe -march=i386 -mcpu=i686   -DVERSION=\"1.08\" -DXS_VERSION=\"1.08\"
>>  -fPIC "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE"   Sybase.c
>> In file included from Sybase.h:16,
>>                  from Sybase.xs:14:
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/DBIXS.h:
>> In function `get_dbistate':
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/DBIXS.h:413:
>> `my_perl' undeclared (first use in this function)
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/DBIXS.h:413:
>> (Each undeclared identifier is reported only once
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/DBIXS.h:413:
>> for each function it appears in.)
>> In file included from Sybase.c:352:
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver_xst.h:
>> In function `dbixst_bounce_method':
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver_xst.h:14:
>> `my_perl' undeclared (first use in this function)
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver_xst.h:
>> In function `dbdxst_bind_params':
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver_xst.h:54:
>> `my_perl' undeclared (first use in this function)
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver_xst.h:
>> In function `dbdxst_fetchall_arrayref':
>> /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver_xst.h:80:
>> `my_perl' undeclared (first use in this function)
>> make: *** [Sybase.o] Error 1
>>   MEWP/DBD-Sybase-1.08.tar.gz
>>   /usr/bin/make -- NOT OK
>>
>