Re: Sybperl: make error 1
dobbie1 <[email protected]>
| Newsgroups | gmane.comp.lang.perl.modules.dbi.sybase |
|---|---|
| Message-ID | <[email protected]> |
Following your reply below, I did:
make clean
perl Makefile.PL
vi DBlib/Makefile:
#EXTRALIBS = -L/sybase/lib -lsybdb -lskrb
EXTRALIBS = -L/sybase/lib -lsybdb
#LDLOADLIBS = -L/sybase/lib -lsybdb -lskrb -lm
LDLOADLIBS = -L/sybase/lib -lsybdb -lm
make
'make test' yielded the following messages:
# make test
make[1]: Entering directory `/tmp/sybperl-2.18/BCP'
make[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
make[1]: Entering directory `/tmp/sybperl-2.18/BLK'
make[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
make[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
make[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
make[1]: Entering directory `/tmp/sybperl-2.18/DBlib'
make[1]: Leaving directory `/tmp/sybperl-2.18/DBlib'
make[1]: Entering directory `/tmp/sybperl-2.18/Sybperl'
make[1]: Leaving directory `/tmp/sybperl-2.18/Sybperl'
PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1_db_dblib...........Sybase error: Server name not found in interface
file.
not ok 1
-- The supplied login id/password combination may be invalid
t/1_db_dblib...........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-22
Failed 22/22 tests, 0.00% okay
t/1_db_money...........DB-Library error:
Server name not found in interface file.
not ok 1
-- The userid/password combination may be invalid - check the PWD file
t/1_db_money...........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-13
Failed 13/13 tests, 0.00% okay
t/2_ct_ctlib...........
Open Client Message: (In msg_cb)
Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
Message String: ct_connect(): directory service layer: internal
directory control layer error: Requested server name not found.
connection failed... at t/2_ct_ctlib.t line 32.
Can't call method "ct_execute" on an undefined value at t/2_ct_ctlib.t
line 38.
t/2_ct_ctlib...........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-30
Failed 29/30 tests, 3.33% okay
t/2_ct_cursor..........
Open Client Message:
Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
Message String: ct_connect(): directory service layer: internal
directory control layer error: Requested server name not found.
connection failed... at t/2_ct_cursor.t line 27.
not ok 2
-- The user id/password combination may be invalid.
t/2_ct_cursor..........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-22
Failed 21/22 tests, 4.55% okay
t/2_ct_nsql............
Open Client Message:
Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
Message String: ct_connect(): directory service layer: internal
directory control layer error: Requested server name not found.
connection failed... at t/2_ct_nsql.t line 22.
Can't call method "nsql" on an undefined value at t/2_ct_nsql.t line 27.
t/2_ct_nsql............dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-4
Failed 3/4 tests, 25.00% okay
t/2_ct_prepare.........
Open Client Message:
Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
Message String: ct_connect(): directory service layer: internal
directory control layer error: Requested server name not found.
connection failed... at t/2_ct_prepare.t line 23.
Can't call method "ct_execute" on an undefined value at t/2_ct_prepare.t
line 29.
t/2_ct_prepare.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-15
Failed 14/15 tests, 6.67% okay
t/2_ct_xblk............connection failed... at t/2_ct_xblk.t line 29.
Can't call method "ct_sql" on unblessed reference at t/2_ct_xblk.t line 36.
t/2_ct_xblk............dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-21
Failed 20/21 tests, 4.76% okay
t/3_bcp................Sybase error: Server name not found in interface
file.
Can't call method "sql" on an undefined value at t/3_bcp.t line 33.
t/3_bcp................dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-9
Failed 8/9 tests, 11.11% okay
t/4_blk................ok
1/19
Open Client Message:
Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
Message String: ct_connect(): directory service layer: internal
directory control layer error: Requested server name not found.
connection failed... at /tmp/sybperl-2.18/blib/lib/Sybase/BLK.pm line 363.
# Failed test 2 in t/4_blk.t at line 23
# t/4_blk.t line 23 is: ok(defined($X)); # 2
Can't call method "ct_sql" on an undefined value at t/4_blk.t line 27.
t/4_blk................dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-19
Failed 18/19 tests, 5.26% okay
t/5_sybperl............Sybase error: Server name not found in interface
file.
not ok 1
-- You may need to edit t/sybperl.t to add login names and passwords
t/5_sybperl............dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-28
Failed 28/28 tests, 0.00% okay
t/5_sybperl_dbmoney....Sybase error: Server name not found in interface
file.
not ok 1
-- You may need to edit t/dbmoney.t to add login names and passwords
t/5_sybperl_dbmoney....dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-32
Failed 32/32 tests, 0.00% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/1_db_dblib.t 255 65280 22 44 200.00% 1-22
t/1_db_money.t 255 65280 13 26 200.00% 1-13
t/2_ct_ctlib.t 255 65280 30 57 190.00% 2-30
t/2_ct_cursor.t 255 65280 22 42 190.91% 2-22
t/2_ct_nsql.t 255 65280 4 5 125.00% 2-4
t/2_ct_prepare.t 255 65280 15 27 180.00% 2-15
t/2_ct_xblk.t 255 65280 21 39 185.71% 2-21
t/3_bcp.t 255 65280 9 15 166.67% 2-9
t/4_blk.t 255 65280 19 35 184.21% 2-19
t/5_sybperl.t 255 65280 28 56 200.00% 1-28
t/5_sybperl_dbmoney.t 255 65280 32 64 200.00% 1-32
Failed 11/11 test scripts, 0.00% okay. 208/215 subtests failed, 3.26% okay.
make: *** [test_dynamic] Error 255
What is wrong now ?
Marek
[email protected] wrote:
>OK - that's a different problem.
>
>You need to edit the sybperl-2.xx/DBlib/Makefile and remove any references
>to -lskrb, and then rebuild.
>
>I suggest the following:
>
>cd sybperl-2.18
>make clean
>perl Makefile.PL
>...
>vi DBlib/Makefile - remove any -lskrb you find
>make
>make test
>
>Michael
>
>
>
>
>Internet
>[email protected]@peppler.org - 18/11/2005 12:19
>
>
>Sent by: [email protected]
>
>To: sybperl-l
>
>cc: Michael PEPPLER
>
>
>Subject: Re: Sybperl: make error 1
>
>
>Hello,
>
>Pardon me for being ignorant about README.
>
>Before 'make install' I did 'make test':
># make test
>make[1]: Entering directory `/tmp/sybperl-2.18/BCP'
>make[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
>make[1]: Entering directory `/tmp/sybperl-2.18/BLK'
>make[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
>make[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
>make[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
>make[1]: Entering directory `/tmp/sybperl-2.18/DBlib'
>make[1]: Leaving directory `/tmp/sybperl-2.18/DBlib'
>make[1]: Entering directory `/tmp/sybperl-2.18/Sybperl'
>make[1]: Leaving directory `/tmp/sybperl-2.18/Sybperl'
>PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e"
>"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
>t/1_db_dblib...........Can't load
>'/tmp/sybperl-2.18/blib/arch/auto/Sybase/DBlib/DBlib.so' for module
>Sybase::DBlib: ld.so.1: /usr/local/bin/perl: fatal: relocation error:
>file /sybase/lib/libskrb.so: symbol netp_dlopen_svr4: referenced symbol
>not found at /usr/local/lib/perl5/5.8.7/sun4-solaris/DynaLoader.pm line
>230.
> at t/1_db_dblib.t line 9
>Compilation failed in require at t/1_db_dblib.t line 9.
>BEGIN failed--compilation aborted at t/1_db_dblib.t line 9.
>t/1_db_dblib...........dubious
>
> Test returned status 2 (wstat 512, 0x200)
>t/1_db_money...........Can't load
>'/tmp/sybperl-2.18/blib/arch/auto/Sybase/DBlib/DBlib.so' for module
>Sybase::DBlib: ld.so.1: /usr/local/bin/perl: fatal: relocation error:
>file /sybase/lib/libskrb.so: symbol netp_dlopen_svr4: referenced symbol
>not found at /usr/local/lib/perl5/5.8.7/sun4-solaris/DynaLoader.pm line
>230.
> at t/1_db_money.t line 9
>Compilation failed in require at t/1_db_money.t line 9.
>BEGIN failed--compilation aborted at t/1_db_money.t line 9.
>t/1_db_money...........dubious
>
> Test returned status 2 (wstat 512, 0x200)
>t/2_ct_ctlib...........
>Open Client Message: (In msg_cb)
>Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
>Message String: ct_connect(): directory service layer: internal
>directory control layer error: Requested server name not found.
>connection failed... at t/2_ct_ctlib.t line 32.
>Can't call method "ct_execute" on an undefined value at t/2_ct_ctlib.t
>line 38.
>t/2_ct_ctlib...........dubious
>
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 2-30
> Failed 29/30 tests, 3.33% okay
>t/2_ct_cursor..........
>Open Client Message:
>Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
>Message String: ct_connect(): directory service layer: internal
>directory control layer error: Requested server name not found.
>connection failed... at t/2_ct_cursor.t line 27.
>not ok 2
>-- The user id/password combination may be invalid.
>t/2_ct_cursor..........dubious
>
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 2-22
> Failed 21/22 tests, 4.55% okay
>t/2_ct_nsql............
>Open Client Message:
>Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
>Message String: ct_connect(): directory service layer: internal
>directory control layer error: Requested server name not found.
>connection failed... at t/2_ct_nsql.t line 22.
>Can't call method "nsql" on an undefined value at t/2_ct_nsql.t line 27.
>t/2_ct_nsql............dubious
>
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 2-4
> Failed 3/4 tests, 25.00% okay
>t/2_ct_prepare.........
>Open Client Message:
>Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
>Message String: ct_connect(): directory service layer: internal
>directory control layer error: Requested server name not found.
>connection failed... at t/2_ct_prepare.t line 23.
>Can't call method "ct_execute" on an undefined value at t/2_ct_prepare.t
>line 29.
>t/2_ct_prepare.........dubious
>
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 2-15
> Failed 14/15 tests, 6.67% okay
>t/2_ct_xblk............connection failed... at t/2_ct_xblk.t line 29.
>Can't call method "ct_sql" on unblessed reference at t/2_ct_xblk.t line 36.
>t/2_ct_xblk............dubious
>
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 2-21
> Failed 20/21 tests, 4.76% okay
>t/3_bcp................Can't load
>'/tmp/sybperl-2.18/blib/arch/auto/Sybase/DBlib/DBlib.so' for module
>Sybase::DBlib: ld.so.1: /usr/local/bin/perl: fatal: relocation error:
>file /sybase/lib/libskrb.so: symbol netp_dlopen_svr4: referenced symbol
>not found at /usr/local/lib/perl5/5.8.7/sun4-solaris/DynaLoader.pm line
>230.
> at /tmp/sybperl-2.18/blib/lib/Sybase/BCP.pm line 278
>Compilation failed in require at
>/tmp/sybperl-2.18/blib/lib/Sybase/BCP.pm line 278.
>BEGIN failed--compilation aborted at
>/tmp/sybperl-2.18/blib/lib/Sybase/BCP.pm line 278.
>Compilation failed in require at t/3_bcp.t line 14.
>BEGIN failed--compilation aborted at t/3_bcp.t line 14.
>t/3_bcp................dubious
>
> Test returned status 2 (wstat 512, 0x200)
>DIED. FAILED tests 1-9
> Failed 9/9 tests, 0.00% okay
>t/4_blk................ok
>1/19
>Open Client Message:
>Message number: LAYER = (6) ORIGIN = (8) SEVERITY = (5) NUMBER = (3)
>Message String: ct_connect(): directory service layer: internal
>directory control layer error: Requested server name not found.
>connection failed... at /tmp/sybperl-2.18/blib/lib/Sybase/BLK.pm line 363.
># Failed test 2 in t/4_blk.t at line 23
># t/4_blk.t line 23 is: ok(defined($X)); # 2
>Can't call method "ct_sql" on an undefined value at t/4_blk.t line 27.
>t/4_blk................dubious
>
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 2-19
> Failed 18/19 tests, 5.26% okay
>t/5_sybperl............Can't load
>'/tmp/sybperl-2.18/blib/arch/auto/Sybase/DBlib/DBlib.so' for module
>Sybase::DBlib: ld.so.1: /usr/local/bin/perl: fatal: relocation error:
>file /sybase/lib/libskrb.so: symbol netp_dlopen_svr4: referenced symbol
>not found at /usr/local/lib/perl5/5.8.7/sun4-solaris/DynaLoader.pm line
>230.
> at /tmp/sybperl-2.18/blib/lib/Sybase/Sybperl.pm line 79
>Compilation failed in require at
>/tmp/sybperl-2.18/blib/lib/Sybase/Sybperl.pm line 79.
>BEGIN failed--compilation aborted at
>/tmp/sybperl-2.18/blib/lib/Sybase/Sybperl.pm line 79.
>Compilation failed in require at /tmp/sybperl-2.18/blib/lib/sybperl.pl
>line 17.
>BEGIN failed--compilation aborted at
>/tmp/sybperl-2.18/blib/lib/sybperl.pl line 17.
>Compilation failed in require at t/5_sybperl.t line 7.
>t/5_sybperl............dubious
>
> Test returned status 2 (wstat 512, 0x200)
>DIED. FAILED tests 1-28
> Failed 28/28 tests, 0.00% okay
>t/5_sybperl_dbmoney....Can't load
>'/tmp/sybperl-2.18/blib/arch/auto/Sybase/DBlib/DBlib.so' for module
>Sybase::DBlib: ld.so.1: /usr/local/bin/perl: fatal: relocation error:
>file /sybase/lib/libskrb.so: symbol netp_dlopen_svr4: referenced symbol
>not found at /usr/local/lib/perl5/5.8.7/sun4-solaris/DynaLoader.pm line
>230.
> at /tmp/sybperl-2.18/blib/lib/Sybase/Sybperl.pm line 79
>Compilation failed in require at
>/tmp/sybperl-2.18/blib/lib/Sybase/Sybperl.pm line 79.
>BEGIN failed--compilation aborted at
>/tmp/sybperl-2.18/blib/lib/Sybase/Sybperl.pm line 79.
>Compilation failed in require at /tmp/sybperl-2.18/blib/lib/sybperl.pl
>line 17.
>BEGIN failed--compilation aborted at
>/tmp/sybperl-2.18/blib/lib/sybperl.pl line 17.
>Compilation failed in require at t/5_sybperl_dbmoney.t line 7.
>t/5_sybperl_dbmoney....dubious
>
> Test returned status 2 (wstat 512, 0x200)
>DIED. FAILED tests 1-32
> Failed 32/32 tests, 0.00% okay
>Failed Test Stat Wstat Total Fail Failed List of Failed
>-------------------------------------------------------------------------------
>
>t/1_db_dblib.t 2 512 ?? ?? % ??
>t/1_db_money.t 2 512 ?? ?? % ??
>t/2_ct_ctlib.t 255 65280 30 57 190.00% 2-30
>t/2_ct_cursor.t 255 65280 22 42 190.91% 2-22
>t/2_ct_nsql.t 255 65280 4 5 125.00% 2-4
>t/2_ct_prepare.t 255 65280 15 27 180.00% 2-15
>t/2_ct_xblk.t 255 65280 21 39 185.71% 2-21
>t/3_bcp.t 2 512 9 17 188.89% 1-9
>t/4_blk.t 255 65280 19 35 184.21% 2-19
>t/5_sybperl.t 2 512 28 56 200.00% 1-28
>t/5_sybperl_dbmoney.t 2 512 32 64 200.00% 1-32
>Failed 11/11 test scripts, 0.00% okay. 174/180 subtests failed, 3.33% okay.
>make: *** [test_dynamic] Error 2
>
>What is still missing ?
>
>Marek
>
>[email protected] wrote:
>
>
>
>>You need to run "make install" to put the modules in the right place....
>>
>>Michael
>>
>>
>>
>>
>>Internet
>>[email protected] - 18/11/2005 11:45
>>
>>
>>To: sybperl-l
>>cc: Michael PEPPLER
>>Subject: Re: Sybperl: make error 1
>>
>>
>>Hello again,
>>
>>Following your hint below I have created a dummpy sqlda.h, and rebuilt
>>Sybperl:
>># cd /tmp
>># cd sybperl-2.18
>># make
>>make[1]: Entering directory `/tmp/sybperl-2.18/BCP'
>>make[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
>>make[1]: Entering directory `/tmp/sybperl-2.18/BLK'
>>make[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
>>make[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
>>make[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
>>make[1]: Entering directory `/tmp/sybperl-2.18/DBlib'
>>make[1]: Leaving directory `/tmp/sybperl-2.18/DBlib'
>>make[1]: Entering directory `/tmp/sybperl-2.18/Sybperl'
>>make[1]: Leaving directory `/tmp/sybperl-2.18/Sybperl'
>># perl Makefile.PL
>>/sybase
>>Sybase OpenClient 11.1.1 found.
>>The sybperl modules need access to a Sybase server to run the tests.
>>To clear an entry please enter 'undef'
>>Sybase server to use (default: SYBASE):
>>User ID to log in to Sybase (default: sa):
>>Password (default: undef):
>>Sybase database to use on SYBASE (default: undef): NEAT
>>
>>* Writing login information, including password, to file PWD.
>>
>>/sybase
>>Sybase OpenClient 11.1.1 found.
>>Writing Makefile for Sybase::BCP
>>Writing Makefile for Sybase::BLK
>>/sybase
>>Sybase OpenClient 11.1.1 found.
>>Note (probably harmless): No library found for -lblk
>>Writing Makefile for Sybase::CTlib
>>/sybase
>>Sybase OpenClient 11.1.1 found.
>>Writing Makefile for Sybase::DBlib
>>/sybase
>>Sybase OpenClient 11.1.1 found.
>>Writing Makefile for Sybase::Sybperl
>>Writing Makefile for Sybase
>># make
>>make[1]: Entering directory `/tmp/sybperl-2.18/BCP'
>>Manifying ../blib/man3/Sybase::BCP.3
>>make[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
>>make[1]: Entering directory `/tmp/sybperl-2.18/BLK'
>>Manifying ../blib/man3/Sybase::BLK.3
>>make[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
>>make[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
>>Skip ../blib/lib/Sybase/CTlib.pm (unchanged)
>>gcc -c -I/sybase/include -fno-strict-aliasing -pipe
>>-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
>>-DVERSION=\"2.18\" -DXS_VERSION=\"2.18\" -fPIC
>>"-I/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE" -DCTLIBVS=100
>>-DSYBPLVER='"2.18"' -DDO_TIE -DNOBLK CTlib.c
>>Running Mkbootstrap for Sybase::CTlib ()
>>chmod 644 CTlib.bs
>>rm -f ../blib/arch/auto/Sybase/CTlib/CTlib.so
>>LD_RUN_PATH="/sybase/lib" gcc -L/sybase/lib -G -L/usr/local/lib
>>CTlib.o -o ../blib/arch/auto/Sybase/CTlib/CTlib.so -L/sybase/lib -lct
>>-lcs -ltcl -lcomn -lintl -lskrb -lm
>>chmod 755 ../blib/arch/auto/Sybase/CTlib/CTlib.so
>>cp CTlib.bs ../blib/arch/auto/Sybase/CTlib/CTlib.bs
>>chmod 644 ../blib/arch/auto/Sybase/CTlib/CTlib.bs
>>Manifying ../blib/man3/Sybase::CTlib.3
>>make[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
>>make[1]: Entering directory `/tmp/sybperl-2.18/DBlib'
>>Skip ../blib/lib/Sybase/DBlib.pm (unchanged)
>>gcc -c -I/sybase/include -fno-strict-aliasing -pipe
>>-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
>>-DVERSION=\"2.18\" -DXS_VERSION=\"2.18\" -fPIC
>>"-I/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE" -DDBLIBVS=1000
>>-DSYBPLVER='"2.18"' -DDO_TIE -DNOBLK DBlib.c
>>Running Mkbootstrap for Sybase::DBlib ()
>>chmod 644 DBlib.bs
>>rm -f ../blib/arch/auto/Sybase/DBlib/DBlib.so
>>LD_RUN_PATH="/sybase/lib" gcc -L/sybase/lib -G -L/usr/local/lib
>>DBlib.o -o ../blib/arch/auto/Sybase/DBlib/DBlib.so -L/sybase/lib
>>-lsybdb -lskrb -lm
>>chmod 755 ../blib/arch/auto/Sybase/DBlib/DBlib.so
>>cp DBlib.bs ../blib/arch/auto/Sybase/DBlib/DBlib.bs
>>chmod 644 ../blib/arch/auto/Sybase/DBlib/DBlib.bs
>>Manifying ../blib/man3/Sybase::DBlib.3
>>make[1]: Leaving directory `/tmp/sybperl-2.18/DBlib'
>>make[1]: Entering directory `/tmp/sybperl-2.18/Sybperl'
>>Manifying ../blib/man3/Sybase::Sybperl.3
>>make[1]: Leaving directory `/tmp/sybperl-2.18/Sybperl'
>>Manifying blib/man3/sybperl.3
>>
>>The script that calls Sybperl contains:
>>#!/usr/local/bin/perl
>># Set program name
>>$prog_name = substr($0, rindex($0, "/") + 1);
>># Has to have perl5
>>if ($] < 5.000)
>> {
>> die("$prog_name: Perl version too old ($]).\n");
>> }
>># Packages
>>use Sybase::Sybperl;
>>
>>This scripts aborts with the following message:
>>
>>
>>>print-nw
>>>
>>>
>>Can't locate Sybase/Sybperl.pm in @INC (@INC contains:
>>/usr/local/lib/perl5/5.8.7/sun4-solaris /usr/local/lib/perl5/5.8.7
>>/usr/local/lib/perl5/site_perl/5.8.7/sun4-solaris
>>/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl .)
>>at print-nw line 52.
>>BEGIN failed--compilation aborted at print-nw line 52.
>>
>>What have I missed here ?
>>
>>Marek
>>
>>[email protected] wrote:
>>
>>
>>
>>
>>
>>>Google is your friend.
>>>
>>>If you search on "sybperl sqlda" you should find the answer to your
>>>question.
>>>
>>>Michael
>>>
>>>
>>>
>>>
>>>Internet
>>>[email protected]@peppler.org - 18/11/2005 09:58
>>>
>>>Sent by: [email protected]
>>>To: sybperl-l
>>>cc:
>>>Subject: Re: Sybperl: make error 1
>>>
>>>
>>>Hello again,
>>>
>>>Pardon my ignorance.
>>>
>>>I fetched perl 5.8.7 and binutils from www.sunfreeware.com, and started
>>>to build sybperl again:
>>># perl Makefile.PL
>>>/sybase
>>>Sybase OpenClient 11.1.1 found.
>>>The sybperl modules need access to a Sybase server to run the tests.
>>>To clear an entry please enter 'undef'
>>>Sybase server to use (default: SYBASE):
>>>User ID to log in to Sybase (default: sa):
>>>Password (default: undef):
>>>Sybase database to use on SYBASE (default: undef): NEAT
>>>
>>>* Writing login information, including password, to file PWD.
>>>
>>>/sybase
>>>Sybase OpenClient 11.1.1 found.
>>>Writing Makefile for Sybase::BCP
>>>Writing Makefile for Sybase::BLK
>>>/sybase
>>>Sybase OpenClient 11.1.1 found.
>>>Note (probably harmless): No library found for -lblk
>>>Writing Makefile for Sybase::CTlib
>>>/sybase
>>>Sybase OpenClient 11.1.1 found.
>>>Writing Makefile for Sybase::DBlib
>>>/sybase
>>>Sybase OpenClient 11.1.1 found.
>>>Writing Makefile for Sybase::Sybperl
>>>Writing Makefile for Sybase
>>># make
>>>make[1]: Entering directory `/tmp/sybperl-2.18/BCP'
>>>Manifying ../blib/man3/Sybase::BCP.3
>>>make[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
>>>make[1]: Entering directory `/tmp/sybperl-2.18/BLK'
>>>Manifying ../blib/man3/Sybase::BLK.3
>>>make[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
>>>make[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
>>>Skip ../blib/lib/Sybase/CTlib.pm (unchanged)
>>>gcc -c -I/sybase/include -fno-strict-aliasing -pipe
>>>-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
>>>-DVERSION=\"2.18\" -DXS_VERSION=\"2.18\" -fPIC
>>>"-I/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE" -DCTLIBVS=100
>>>-DSYBPLVER='"2.18"' -DDO_TIE -DNOBLK CTlib.c
>>>In file included from CTlib.xs:41:
>>>/sybase/include/ctpublic.h:20:19: sqlda.h: No such file or directory
>>>In file included from CTlib.xs:41:
>>>/sybase/include/ctpublic.h:268: error: parse error before "SQLDA"
>>>make[1]: *** [CTlib.o] Error 1
>>>make[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
>>>make: *** [subdirs] Error 2
>>>
>>>As /sybase/include does not include sqlda.h, where do I find it ?
>>>
>>>Regards,
>>>
>>>Marek
>>>
>>>[email protected] wrote:
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>>It does that because it pulls that information from Perl's Config.pm
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>file.
>>>
>>>
>>>
>>>
>>>
>>>
>>>>That's why I suggested also building a new perl (or getting a gcc-built
>>>>perl from www.sunfreeware.com)
>>>>
>>>>Michael
>>>>
>>>>
>>>>
>>>>
>>>>Internet
>>>>[email protected]@peppler.org - 17/11/2005 22:39
>>>>
>>>>
>>>>Sent by: [email protected]
>>>>
>>>>To: sybperl-l
>>>>
>>>>cc: Michael PEPPLER
>>>>
>>>>
>>>>Subject: Re: Sybperl: make error 1
>>>>
>>>>
>>>>Hello again,
>>>>
>>>>After having fetched gcc and make from www.sunfreeware.com, I re-run
>>>>perl Makefile.PL
>>>>Then modify Makefile to contain:
>>>>#CC = cc
>>>>CC = gcc
>>>>#LD = cc
>>>>LD = gcc
>>>>
>>>>Eventually I run make:
>>>># make
>>>>make[1]: Entering directory `/tmp/sybperl-2.18/BCP'
>>>>make[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
>>>>make[1]: Entering directory `/tmp/sybperl-2.18/BLK'
>>>>make[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
>>>>make[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
>>>>cc -c -I/sybase/include -xO3 -xdepend -DVERSION=\"2.18\"
>>>>-DXS_VERSION=\"2.18\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE
>>>>-DCTLIBVS=100 -DSYBPLVER='"2.18"' -DDO_TIE -DNOBLK CTlib.c
>>>>make[1]: cc: Command not found
>>>>make[1]: *** [CTlib.o] Error 127
>>>>make[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
>>>>make: *** [subdirs] Error 2
>>>>
>>>>Why does make call 'cc -c -I/sybase/include ...' although I have
>>>>modified CC and LD ?
>>>>
>>>>Marek
>>>>
>>>>dobbie1 wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Michael,
>>>>>
>>>>>Thank you for your reply.
>>>>>
>>>>>I will report my progress as soon I get all the pieces in place.
>>>>>
>>>>>Marek
>>>>>
>>>>>[email protected] wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>You need several things before you can get this to build.
>>>>>>
>>>>>>First you need a C compiler - either the one from Sun (not free) or
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>gcc
>>
>>
>>
>>
>>>>>>(see www.sunfreeware.com).
>>>>>>
>>>>>>Once you have that you really need to rebuild perl or get a new perl
>>>>>>binary
>>>>>>built with gcc (from www.sunfreeware.com, for example) as it is pretty
>>>>>>tricky to get a perl module to build correctly when the main perl
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>binary
>>>
>>>
>>>
>>>
>>>
>>>
>>>>>>was created with a different compiler.
>>>>>>
>>>>>>Once all that is done, then you can build sybperl, and yes, the
>>>>>>syntax you
>>>>>>used in the CONFIG file is correct.
>>>>>>
>>>>>>Michael
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>Internet
>>>>>>[email protected]@peppler.org - 11/11/2005 15:03
>>>>>>
>>>>>>
>>>>>>Sent by: [email protected]
>>>>>>
>>>>>>To: sybperl-l
>>>>>>
>>>>>>cc: Michael PEPPLER
>>>>>>
>>>>>>
>>>>>>Subject: Re: Sybperl: make error 1
>>>>>>
>>>>>>
>>>>>>Hello again,
>>>>>>
>>>>>>Thank you for your reply.
>>>>>>
>>>>>>I am still missing a reply stating how I insert -DNOBLK into
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>EXTRA_DEFS.
>>>
>>>
>>>
>>>
>>>
>>>
>>>>>>Should it be:
>>>>>>EXTRA_DEFS=-DDO_TIE -DNOBLK
>>>>>>
>>>>>>I have digged deeper into make, and made the following:
>>>>>># PATH=$PATH:/usr/ccs/bin; export PATH; echo $PATH
>>>>>>/usr/sbin:/usr/bin:/usr/perl5:/usr/ccs/bin
>>>>>># which make
>>>>>>/usr/ccs/bin/make
>>>>>>
>>>>>>Now I run make:
>>>>>># make
>>>>>>mkdir ../blib/lib/Sybase
>>>>>>mkdir ../blib/arch/auto/Sybase/BCP
>>>>>>mkdir ../blib/lib/auto/Sybase/BCP
>>>>>>cp BCP.pm ../blib/lib/Sybase/BCP.pm
>>>>>>Manifying ../blib/man3/Sybase::BCP.3
>>>>>>mkdir ../blib/arch/auto/Sybase/BLK
>>>>>>mkdir ../blib/lib/auto/Sybase/BLK
>>>>>>cp BLK.pm ../blib/lib/Sybase/BLK.pm
>>>>>>Manifying ../blib/man3/Sybase::BLK.3
>>>>>>mkdir ../blib/arch/auto/Sybase/CTlib
>>>>>>mkdir ../blib/lib/auto/Sybase/CTlib
>>>>>>cp CTlib.pm ../blib/lib/Sybase/CTlib.pm
>>>>>>AutoSplitting ../blib/lib/Sybase/CTlib.pm
>>>>>>(../blib/lib/auto/Sybase/CTlib)
>>>>>>/usr/bin/perl -I/usr/perl5/5.00503/sun4-solaris -I/usr/perl5/5.00503
>>>>>>/usr/perl5/5.00503/ExtUtils/xsubpp -prototypes -typemap
>>>>>>/usr/perl5/5.00503/ExtUtils/typemap CTlib.xs >xstmp.c && mv xstmp.c
>>>>>>CTlib.c
>>>>>>cc -c -I/sybase/include -xO3 -xdepend -DVERSION=\"2.18\"
>>>>>>-DXS_VERSION=\"2.18\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE
>>>>>>-DCTLIBVS=100 -DSYBPLVER='"2.18"' -DDO_TIE CTlib.c
>>>>>>sh: cc: not found
>>>>>>*** Error code 1
>>>>>>make: Fatal error: Command failed for target `CTlib.o'
>>>>>>Current working directory /tmp/sybperl-2.18/CTlib
>>>>>>*** Error code 1
>>>>>>make: Fatal error: Command failed for target `subdirs'
>>>>>>
>>>>>>I have found cc in /usr/ucb, appended the directory to $PATH, and run
>>>>>>make again:
>>>>>># find / -name cc -print
>>>>>>/usr/ucb/cc
>>>>>># PATH=$PATH:/usr/ucb; export PATH; echo $PATH
>>>>>>/usr/sbin:/usr/bin:/usr/perl5:/usr/ccs/bin:/usr/ucb
>>>>>># make
>>>>>>cc -c -I/sybase/include -xO3 -xdepend -DVERSION=\"2.18\"
>>>>>>-DXS_VERSION=\"2.18\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE
>>>>>>-DCTLIBVS=100 -DSYBPLVER='"2.18"' -DDO_TIE CTlib.c
>>>>>>/usr/ucb/cc: language optional software package not installed
>>>>>>*** Error code 1
>>>>>>make: Fatal error: Command failed for target `CTlib.o'
>>>>>>Current working directory /tmp/sybperl-2.18/CTlib
>>>>>>*** Error code 1
>>>>>>make: Fatal error: Command failed for target `subdirs'
>>>>>>
>>>>>>What cc package is missing ?
>>>>>>
>>>>>>Marek
>>>>>>
>>>>>>[email protected] wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Sorry -DNOBLK.
>>>>>>>
>>>>>>>For the make not being found I don't really know what the problem
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>might
>>>
>>>
>>>
>>>
>>>
>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>be.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Michael
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>Internet
>>>>>>>[email protected] - 11/11/2005 14:12
>>>>>>>
>>>>>>>To: Michael PEPPLER
>>>>>>>
>>>>>>>cc:
>>>>>>>
>>>>>>>
>>>>>>>Subject: Re: Sybperl: make error 1
>>>>>>>
>>>>>>>
>>>>>>>Hello again,
>>>>>>>
>>>>>>>I have checked CONFIG, and it contains:
>>>>>>>EXTRA_DEFS=-DDO_TIE
>>>>>>>Further on CONFIG mentions -DNOBLK, and not -DNO_BLK.
>>>>>>>Which option is valid ?
>>>>>>>How do I append the valid option to the existing EXTRA_DEFS ?
>>>>>>>
>>>>>>># which make
>>>>>>>o make in /usr/sbin /usr/bin
>>>>>>>Although I have changed the order in PATH:
>>>>>>># echo $PATH
>>>>>>>/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/perl5
>>>>>>># which make
>>>>>>>o make in /usr/sbin /usr/bin
>>>>>>>
>>>>>>>What have I missed here ?
>>>>>>>
>>>>>>>Marek
>>>>>>>
>>>>>>>[email protected] wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>A couple of problems.
>>>>>>>>
>>>>>>>>First, the -lblk library is missing. This is "normal" on Solaris
>>>>>>>>unless
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>you
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>have the full OpenClient SDK installed.
>>>>>>>>For sybperl you should be able to add a -DNO_BLK in the CONFIG file
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>to
>>>
>>>
>>>
>>>
>>>
>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>get
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>around this and have the make succeed.
>>>>>>>>
>>>>>>>>Second, the make binary is indeed in /usr/ccs/bin. My guess is that
>>>>>>>>the
>>>>>>>>path isn't quite right. What does "which make" produce?
>>>>>>>>
>>>>>>>>Michael
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>Internet
>>>>>>>>[email protected]@peppler.org - 11/11/2005 11:21
>>>>>>>>
>>>>>>>>
>>>>>>>>Sent by: [email protected]
>>>>>>>>
>>>>>>>>To: sybperl-l
>>>>>>>>
>>>>>>>>cc:
>>>>>>>>
>>>>>>>>
>>>>>>>>Subject: Sybperl: make error 1
>>>>>>>>
>>>>>>>>
>>>>>>>>Hello,
>>>>>>>>
>>>>>>>>Below is the screen output while trying to install Sybperl in my Sun
>>>>>>>>E250 running Solaris 8 and Sybase 11.9:
>>>>>>>># PATH=$PATH:/usr/perl5
>>>>>>>># echo $PATH
>>>>>>>>/usr/sbin:/usr/bin:/usr/perl5
>>>>>>>># perl -v
>>>>>>>>
>>>>>>>>This is perl, version 5.005_03 built for sun4-solaris
>>>>>>>># perl Makefile.PL
>>>>>>>>/sybase
>>>>>>>>Sybase OpenClient 11.1.1 found.
>>>>>>>>The sybperl modules need access to a Sybase server to run the tests.
>>>>>>>>To clear an entry please enter 'undef'
>>>>>>>>Sybase server to use (default: SYBASE):
>>>>>>>>User ID to log in to Sybase (default: sa):
>>>>>>>>Password (default: undef):
>>>>>>>>Sybase database to use on SYBASE (default: undef):
>>>>>>>>
>>>>>>>>* Writing login information, including password, to file PWD.
>>>>>>>>
>>>>>>>>Checking if your kit is complete...
>>>>>>>>Looks good
>>>>>>>>/sybase
>>>>>>>>Sybase OpenClient 11.1.1 found.
>>>>>>>>Writing Makefile for Sybase::BCP
>>>>>>>>Writing Makefile for Sybase::BLK
>>>>>>>>/sybase
>>>>>>>>Sybase OpenClient 11.1.1 found.
>>>>>>>>Note (probably harmless): No library found for -lblk
>>>>>>>>Writing Makefile for Sybase::CTlib
>>>>>>>>/sybase
>>>>>>>>Sybase OpenClient 11.1.1 found.
>>>>>>>>Writing Makefile for Sybase::DBlib
>>>>>>>>/sybase
>>>>>>>>Sybase OpenClient 11.1.1 found.
>>>>>>>>Writing Makefile for Sybase::Sybperl
>>>>>>>>Writing Makefile for Sybase
>>>>>>>># make
>>>>>>>>make: not found
>>>>>>>># find / -name make -print
>>>>>>>>/usr/share/lib/make
>>>>>>>>/usr/ccs/bin/make
>>>>>>>>/usr/xpg4/bin/make
>>>>>>>># PATH=$PATH:/usr/ccs/bin
>>>>>>>># echo $PATH
>>>>>>>>/usr/sbin:/usr/bin:/usr/perl5:/usr/ccs/bin
>>>>>>>># make
>>>>>>>>mkdir blib
>>>>>>>>mkdir blib/lib
>>>>>>>>mkdir blib/arch
>>>>>>>>mkdir blib/arch/auto
>>>>>>>>mkdir blib/arch/auto/Sybase
>>>>>>>>mkdir blib/lib/auto
>>>>>>>>mkdir blib/lib/auto/Sybase
>>>>>>>>mkdir blib/man3
>>>>>>>>cp lib/sql.pl blib/lib/sql.pl
>>>>>>>>cp lib/sybperl.pl blib/lib/sybperl.pl
>>>>>>>>cp lib/sybutil.pl blib/lib/sybutil.pl
>>>>>>>>cp lib/ctutil.pl blib/lib/ctutil.pl
>>>>>>>>sh: make: not found
>>>>>>>>*** Error code 1
>>>>>>>>make: Fatal error: Command failed for target `subdirs'
>>>>>>>>
>>>>>>>>Shall I use another make instead of /usr/ccs/bin/make ?
>>>>>>>>
>>>>>>>>Regards,
>>>>>>>>
>>>>>>>>Marek
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>This message and any attachments (the "message") is
>>>>>>>>intended solely for the addressees and is confidential.
>>>>>>>>If you receive this message in error, please delete it and
>>>>>>>>immediately notify the sender. Any use not in accord with
>>>>>>>>its purpose, any dissemination or disclosure, either whole
>>>>>>>>or partial, is prohibited except formal approval. The internet
>>>>>>>>can not guarantee the integrity of this message.
>>>>>>>>BNP PARIBAS (and its subsidiaries) shall (will) not
>>>>>>>>therefore be liable for the message if modified.
>>>>>>>>
>>>>>>>> ---------------------------------------------
>>>>>>>>
>>>>>>>>Ce message et toutes les pieces jointes (ci-apres le
>>>>>>>>"message") sont etablis a l'intention exclusive de ses
>>>>>>>>destinataires et sont confidentiels. Si vous recevez ce
>>>>>>>>message par erreur, merci de le detruire et d'en avertir
>>>>>>>>immediatement l'expediteur. Toute utilisation de ce
>>>>>>>>message non conforme a sa destination, toute diffusion
>>>>>>>>ou toute publication, totale ou partielle, est interdite, sauf
>>>>>>>>autorisation expresse. L'internet ne permettant pas
>>>>>>>>d'assurer l'integrite de ce message, BNP PARIBAS (et ses
>>>>>>>>filiales) decline(nt) toute responsabilite au titre de ce
>>>>>>>>message, dans l'hypothese ou il aurait ete modifie.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
>