Re: problem building perl 5.10.1
Fabio Ciampi <[email protected]> Mon, 02 Aug 2010 11:40:29 +0200
| Newsgroups | gmane.comp.lang.perl.ports.vms |
|---|---|
| Message-ID | <[email protected]> |
Hi
Thanks to both for answers.
I've have to change the machine on which install perl for reasons linked
to production environment problems.
Anyway I still have an IA64 Operating System (Version V8.3-1H1), ODS5
disk, MadGoat Make Utility V4.1. Instead I change my compiler; now I
have HP C X7.3-289.
>>>
>>> @configure "-des" "-Dprefix=DATE$MSA1:[PERL-5_10_1.]"
>>
>> I have not used the -Dprefix. On VMS, I use logical names to
>> determine which version of an application to run. Perl uses the
>> logical name PERL_ROOT, regardless of what prefix that you assign.
>
> True, but irrelevant. On VMS, the prefix just determines what goes
> into the generated perl_setup.com to specify where Perl will be
> installed. Everything will still refer to perl_root, which will in
> turn point the directory specified by prefix. In theory, vms_prefix
> is configurable and would give you something other than perl_root;
> Don't Do That, though, as way too many things have evolved to depend
> explicitly on perl_root.
>
This time, for semplicity, I didn't use any prefix; I only gave the command:
@configure "-des"
>>> mmk
>>> mmk test
>>> The mmk process works (I only have some "Warning: long symbol....").
>>> During mmk test I saw some tests failed:
>>> t/op/exec.....................................................FAILED
>>> at test 16
>>> ext/Compress-Raw-Bzip2/t/01bzip2..............................FAILED--expected
>>> 157 tests, saw 10
>>> ext/Compress-Raw-Bzip2/t/09limitoutput........................FAILED--expected
>>> 88 tests, saw 5
>>> ext/IO-Compress/t/001bzip2....................................FAILED
>>> at test 58
>>> ext/IO-Compress/t/006zip......................................FAILED--expected
>>> 77 tests, saw 17
>>
>> Perl is sensitive to the logical name BIN, and foreign commands for
>> ZIP and BZIP2 among others.
>
> Yes, the compression modules are sensitive to what compression
> utilities you have installed. The tests attempt to determine what's
> there and use it or work around it but often fail to do so correctly.
>
I have modified the startup file in cluster$mgr directory to exclude my
machine to take the symbol commands concerning compression utility.
About the logical name BIN I don't have logical name assigned to it.
>> For building and the initial testing of Perl, make sure that all the
>> DECC$ feature logicals are set to their default.
>
> I would say check which, if any you have enabled and try turning them
> off. E.g.
>
> $ show logical DECC$*
I have only the default DECC$ feature logicals:
"DECC$CRTLMAP" = "SYS$SHARE:DECC$SHR"
"DECC$SHR_AV" = "DECC$SHR
> Quotas could, as John said, also be a problem. We don't have a
> complete or up-to-date list of what quotas you need, so maybe post the
> results of
>
> $ show process/quota
>
> 22-JUL-2010 13:59:09.33 User: CRAIG Process ID: 0005B477
> Node: ALMA Process name: "_FTA6:"
>
> Process Quotas:
> Account name: CAB
> CPU limit: Infinite Direct I/O limit: 1024
> Buffered I/O byte count quota: 1999808 Buffered I/O limit: 1024
> Timer queue entry quota: 400 Open file quota: 512
> Paging file quota: 2993040 Subprocess quota: 10
> Default page fault cluster: 64 AST quota: 398
> Enqueue quota: 4000 Shared file limit: 0
> Max detached processes: 0 Max active jobs: 0
>
ISTI-MX4> show process/quota
30-JUL-2010 16:09:23.59 User: SYSTEM Process ID: 3F0004AE
Node: MX4 Process name: "_TNA3:"
Process Quotas:
Account name: SYSTEM
CPU limit: Infinite Direct I/O limit: 200
Buffered I/O byte count quota: 2999808 Buffered I/O limit: 200
Timer queue entry quota: 2000 Open file quota: 300
Paging file quota: 1492944 Subprocess quota: 10
Default page fault cluster: 64 AST quota: 248
Enqueue quota: 2500 Shared file limit: 0
Max detached processes: 0 Max active jobs: 0
This time the mmk test process execute completely and the tests
concerning the compression utility work fine. Anyway I have some other
tests failed:
Failed 9 tests out of 1550, 99.42% okay.
[-.lib.Archive.Extract.t]01_Archive-Extract.t
[-.lib.CPANPLUS.t]03_CPANPLUS-Internals-Source.t
[-.lib.CPANPLUS.t]15_CPANPLUS-Shell.t
[-.lib.ExtUtils.t]cp.t
[-.lib.ExtUtils.t]pm_to_blib.t
[-.lib.Module.Build.t]debug.t
[-.lib.Module.Build.t]tilde.t
[-.lib]vmsish.t
op/exec.t
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
### You have a good chance to get more information by running
### ./perl harness
### in the 't' directory since most (>=80%) of the tests succeeded.
u=69.33 s=0.00 cu=0.00 cs=0.00 scripts=1550 tests=217993
30-JUL-2010 18:19:40.41 User: SYSTEM Process ID: 3F000598
Node: MX4 Process name:
"SYSTEM_63790"
Accounting information:
Buffered I/O count: 1352573 Peak working set size: 114496
Direct I/O count: 53188 Peak virtual size: 344272
Page faults: 26725 Mounted volumes: 0
Images activated: 17
Elapsed CPU time: 0 00:01:09.34
Connect time: 0 02:01:45.87
Following more information about the failure of the tests:
ISTI-MX4> @[.vms]test .exe "" "-v" [.op]exec.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:23:00.59 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 77481 Peak working set size: 27216
Direct I/O count: 37268 Peak virtual size: 220304
Page faults: 223564 Mounted volumes: 0
Images activated: 484
Elapsed CPU time: 0 00:00:29.69
Connect time: 0 02:54:09.66
1..22
ok 1 - interp system(EXPR)
ok 2 - exited 0
ok 3 - split & direct system(EXPR)
ok 4 - exited 0
ok 5 - system(PROG, LIST)
ok 6 - exited 0
ok 7 - piped echo emulation
not ok 8 - no extra newlines on `` # TODO VMS sticks newlines on everything
# Failed at [.op]exec.t line 82
# got 'ok
# '
# expected 'ok'
not ok 9 - no extra newlines on pipes # TODO VMS sticks newlines on
everything
# Failed at [.op]exec.t line 85
# got 'ok
# '
# expected 'ok'
not ok 10 - doubled up newlines # TODO VMS sticks newlines on everything
# Failed at [.op]exec.t line 88
# got 'ok
#
#
# '
# expected 'ok
#
# '
not ok 11 - extra newlines on inside pipes # TODO VMS sticks newlines on
everything
# Failed at [.op]exec.t line 91
# got 'ok
#
# '
# expected 'ok
# '
not ok 12 - extra newlines on outgoing pipes # TODO VMS sticks newlines
on everything
# Failed at [.op]exec.t line 94
# got 'ok
#
# '
# expected 'ok
# '
not ok 13 - ignore $/ when capturing output in scalar context # TODO VMS
sticks newlines on everything
# Failed at [.op]exec.t line 100
# got '1234
# '
# expected '1234'
ok 14 - Explicit exit of 0
ok 15 - Explicit exit of 1
not ok 16
t/OP/EXEC....FAILED at test 16
Failed 1 test out of 1, 0.00% okay.
[.OP]EXEC.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=29.87 s=0.00 cu=0.00 cs=0.00 scripts=1 tests=22
30-JUL-2010 18:23:07.70 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 78420 Peak working set size: 27216
Direct I/O count: 37350 Peak virtual size: 220304
Page faults: 224189 Mounted volumes: 0
Images activated: 486
Elapsed CPU time: 0 00:00:29.88
Connect time: 0 02:54:16.78
%SYSTEM-F-ABORT, abort
About the test:
$rc = system { "lskdfj" } "lskdfj";
unless( ok($rc == 255 << 8 or $rc == -1 or $rc == 256 or $rc == 512) ) {
print "# \$rc == $rc\n";
}
I don't understand very well what I should do for trying running the
test independently how you suggested me.
Anyway if I comment the other tests and I run this test alone with
@[.vms]test .exe "" "-v" [.op]exec.t, I don't see anything but it
confirm that is this test that failed:
# Failed at [.op]exec.t line 13
not ok 1
t/OP/EXEC....FAILED at test 1
Failed 1 test out of 0, 0.00% okay.
[.OP]EXEC.T
If I comment this test lines and running exec.t, I obtain again an error:
1..22
ok 1 - interp system(EXPR)
ok 2 - exited 0
ok 3 - split & direct system(EXPR)
ok 4 - exited 0
ok 5 - system(PROG, LIST)
ok 6 - exited 0
ok 7 - piped echo emulation
not ok 8 - no extra newlines on `` # TODO VMS sticks newlines on everything
# Failed at [.op]exec.t line 82
# got 'ok
# '
# expected 'ok'
not ok 9 - no extra newlines on pipes # TODO VMS sticks newlines on
everything
# Failed at [.op]exec.t line 85
# got 'ok
# '
# expected 'ok'
not ok 10 - doubled up newlines # TODO VMS sticks newlines on everything
# Failed at [.op]exec.t line 88
# got 'ok
#
#
# '
# expected 'ok
#
# '
not ok 11 - extra newlines on inside pipes # TODO VMS sticks newlines on
everything
# Failed at [.op]exec.t line 91
# got 'ok
#
# '
# expected 'ok
# '
not ok 12 - extra newlines on outgoing pipes # TODO VMS sticks newlines
on everything
# Failed at [.op]exec.t line 94
# got 'ok
#
# '
# expected 'ok
# '
not ok 13 - ignore $/ when capturing output in scalar context # TODO VMS
sticks newlines on everything
# Failed at [.op]exec.t line 100
# got '1234
# '
# expected '1234'
ok 14 - Explicit exit of 0
ok 15 - Explicit exit of 1
not ok 16
t/OP/EXEC....FAILED at test 16
Failed 1 test out of 1, 0.00% okay.
[.OP]EXEC.T
If I comment the lines:
$rc = system { "lskdfj" } "lskdfj";
unless( ok($rc == 255 << 8 or $rc == -1 or $rc == 256 or $rc == 512) ) {
print "# \$rc == $rc\n";
}
and also the following test:
unless ( ok( $! == 2 or $! =~ /\bno\b.*\bfile/i or
$! == 13 or $! =~ /permission denied/i or
$! == 22 or $! =~ /invalid argument/i ) ) {
printf "# \$! eq %d, '%s'\n", $!, $!;
}
now it seems to work:
1..22
ok 1 - interp system(EXPR)
ok 2 - exited 0
ok 3 - split & direct system(EXPR)
ok 4 - exited 0
ok 5 - system(PROG, LIST)
ok 6 - exited 0
ok 7 - piped echo emulation
not ok 8 - no extra newlines on `` # TODO VMS sticks newlines on everything
# Failed at [.op]exec.t line 82
# got 'ok
# '
# expected 'ok'
not ok 9 - no extra newlines on pipes # TODO VMS sticks newlines on
everything
# Failed at [.op]exec.t line 85
# got 'ok
# '
# expected 'ok'
not ok 10 - doubled up newlines # TODO VMS sticks newlines on everything
# Failed at [.op]exec.t line 88
# got 'ok
#
#
# '
# expected 'ok
#
# '
not ok 11 - extra newlines on inside pipes # TODO VMS sticks newlines on
everything
# Failed at [.op]exec.t line 91
# got 'ok
#
# '
# expected 'ok
# '
not ok 12 - extra newlines on outgoing pipes # TODO VMS sticks newlines
on everything
# Failed at [.op]exec.t line 94
# got 'ok
#
# '
# expected 'ok
# '
not ok 13 - ignore $/ when capturing output in scalar context # TODO VMS
sticks newlines on everything
# Failed at [.op]exec.t line 100
# got '1234
# '
# expected '1234'
ok 14 - Explicit exit of 0
ok 15 - Explicit exit of 1
ok 16 - basic ``
ok 17 - <<`HEREDOC`
ok 18 - readpipe default argument
ok 19 - exec failure doesn't terminate process
ok 20 - exec PROG, LIST
t/OP/EXEC....FAILED--expected 22 tests, saw 20
Failed 1 test out of 1, 0.00% okay.
[.OP]EXEC.T
########################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib.Archive.Extract.t]01_Archive-Extract.t;1
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:29:06.42 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 79109 Peak working set size: 27216
Direct I/O count: 37422 Peak virtual size: 220304
Page faults: 225525 Mounted volumes: 0
Images activated: 503
Elapsed CPU time: 0 00:00:30.08
Connect time: 0 03:00:15.50
ok 1 - use Archive::Extract;
ok 2 - Archive::Extract->can('types')
ok 3 - Got a list of types
ok 4 - Object created based on 'tgz'
ok 5 - No error logged
ok 6 - Object created based on 'tar'
ok 7 - No error logged
ok 8 - Object created based on 'gz'
ok 9 - No error logged
ok 10 - Object created based on 'zip'
ok 11 - No error logged
ok 12 - Object created based on 'bz2'
ok 13 - No error logged
ok 14 - Object created based on 'tbz'
ok 15 - No error logged
ok 16 - Object created based on 'Z'
ok 17 - No error logged
ok 18 - Object created based on 'lzma'
ok 19 - No error logged
ok 20 - No archive created based on '01_archive-extract.t;1'
ok 21 - Error not captured in class method
ok 22 - Error captured as warning
ok 23 - Error is: unknown file type
ok 24 - Archive created
ok 25 - No errors yet
ok 26 - Errors retrieved
ok 27 - As expected
ok 28 - Errors erased after ->extract() call
ok 29 - Found extraction dir
'$1$DGA100:[PERL-5_10_1.lib.Archive.Extract.t.src]'
ok 30 - Is expected dir
'$1$DGA100:[PERL-5_10_1.lib.Archive.Extract.t.src]'
ok 31 # skip Prepending ./ to a valid path doesn't give you another
valid path on VMS
ok 32 # skip Prepending ./ to a valid path doesn't give you another
valid path on VMS
ok 33 - The object isa Archive::Extract
ok 34 - Archive type recognized properly
not ok 35 - extract() for 'y.tar.gz' reports success (PP: 0 Bin: 1)
t/$1$DGA100/PERL-5_10_1/LIB/ARCHIVE/EXTRACT/T/01_ARCHIVE-EXTRACT.T....FAILED
at test 35
Failed 1 test out of 0, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB.ARCHIVE.EXTRACT.T]01_ARCHIVE-EXTRACT.T;1
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=30.21 s=0.00 cu=0.00 cs=0.00 scripts=0 tests=0
30-JUL-2010 18:29:23.53 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 81024 Peak working set size: 27216
Direct I/O count: 37506 Peak virtual size: 220304
Page faults: 226159 Mounted volumes: 0
Images activated: 505
Elapsed CPU time: 0 00:00:30.23
Connect time: 0 03:00:32.61
%SYSTEM-F-ABORT, abort
############################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib.CPANPLUS.t]03_CPANPLUS-Internals-Source.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:31:06.65 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 81152 Peak working set size: 27216
Direct I/O count: 37528 Peak virtual size: 220304
Page faults: 226495 Mounted volumes: 0
Images activated: 512
Elapsed CPU time: 0 00:00:30.26
Connect time: 0 03:02:15.73
ok 1 - The object isa CPANPLUS::Internals
ok 2 -
$1$DGA100:[PERL-5_10_1.LIB.CPANPLUS.T.dummy-cpanplus]01mailrc.txt.gz exists
ok 3 -
$1$DGA100:[PERL-5_10_1.LIB.CPANPLUS.T.dummy-cpanplus]02packages.details.txt.gz
exists
ok 4 -
$1$DGA100:[PERL-5_10_1.LIB.CPANPLUS.T.dummy-cpanplus]03modlist.data.gz
exists
ok 5 - Authortree loaded successfully
ok 6 - Authortree has items in it
ok 7 - Moduletree loaded successfully
ok 8 - Moduletree has items in it
ok 9 - The object isa CPANPLUS::Module::Author
ok 10 - The object isa CPANPLUS::Module
ok 11 - Testing save state functionality
ok 12 - No status set yet in module object
ok 13 - Status now set
ok 14 - State information saved
ok 15 - Diagnostics confirmed
ok 16 - Trees are rebuilt
ok 17 - Diagnostics confirmed
ok 18 - Status now set in module object
ok 19 - Found file for custom source
ok 20 - File
'$1$dga100:[perl-5_10_1.lib.cpanplus.t.dummy-CPAN.authors.id.EUNOXS]Foo-Bar-0.01.tar.gz'
exists
ok 21 - Sources should be written to
'file:///$1$dga100/perl-5_10_1/lib/cpanplus/t/dummy-CPAN/authors/id/EUNOXS'
ok 22 - Sources written to
'$1$DGA100:[PERL-5_10_1.LIB.CPANPLUS.T.dummy-cpanplus.custom-sources]file^%3A^%2F^%2F^%2F^%241^%24dga100^%2Fperl
-5_10_1^%2Flib^%2Fcpanplus^%2Ft^%2Fdummy-CPAN^%2Fauthors^%2Fid^%2FEUNOXS'
ok 23 - File exists
ok 24 - CPANPLUS::Backend->can('__write_custom_module_index')
ok 25 - Sources written
ok 26 - Written to expected file
ok 27 - Source file exists
ok 28 - File has non-zero size
ok 29 - CPANPLUS::Backend->can('__list_custom_module_sources')
ok 30 - Got list of sources
ok 31 - Found proper entry for
$1$DGA100:[PERL-5_10_1.LIB.CPANPLUS.T.dummy-cpanplus.custom-sources]file^%3A^%2F^%2F^%2F^%241^%24dga100^%
2Fperl-5_10_1^%2Flib^%2Fcpanplus^%2Ft^%2Fdummy-CPAN^%2Fauthors^%2Fid^%2FEUNOXS
ok 32 - CPANPLUS::Backend->can('__create_custom_module_entries')
ok 33 - Sources file loaded
ok 34 - Found added module
ok 35 - Full download path set
ok 36 - Attributed to custom author
ok 37 - Addition message recorded
ok 38 - CPANPLUS::Backend->can('__update_custom_module_sources')
ok 39 - Custom sources updated
not ok 40 - Timestamp on sourcefile updated
t/$1$DGA100/PERL-5_10_1/LIB/CPANPLUS/T/03_CPANPLUS-INTERNALS-SOURCE....FAILED
at test 40
Failed 1 test out of 0, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB.CPANPLUS.T]03_CPANPLUS-INTERNALS-SOURCE.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=30.41 s=0.00 cu=0.00 cs=0.00 scripts=0 tests=0
30-JUL-2010 18:31:19.26 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 82045 Peak working set size: 27216
Direct I/O count: 37616 Peak virtual size: 220304
Page faults: 227172 Mounted volumes: 0
Images activated: 514
Elapsed CPU time: 0 00:00:30.43
Connect time: 0 03:02:28.34
%SYSTEM-F-ABORT, abort
###############################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib.CPANPLUS.t]15_CPANPLUS-Shell.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:34:11.74 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 82192 Peak working set size: 27216
Direct I/O count: 37638 Peak virtual size: 220304
Page faults: 227507 Mounted volumes: 0
Images activated: 521
Elapsed CPU time: 0 00:00:30.47
Connect time: 0 03:05:20.82
ok 1 - use CPANPLUS::Shell;
ok 2 - Default shell loaded
ok 3 - New object created
ok 4 - Object isa CPANPLUS::Shell::Default
ok 5 - CPANPLUS::Shell->can('dispatch_on_input')
ok 6 - Testing 'v'
ok 7 - Output received
ok 8 - Output matches '(?-xism:CPANPLUS)'
ok 9 - Testing '! $self->__print($$)'
ok 10 - Output received
ok 11 - Output matches '(?-xism:1056974156)'
ok 12 - Testing '?'
ok 13 - Output received
ok 14 - Output matches '(?-xism:\[General\])'
ok 15 - Testing 'h'
ok 16 - Output received
ok 17 - Output matches '(?-xism:\[General\])'
ok 18 - Testing 's'
ok 19 - Output received
ok 20 - Output matches '(?-xism:Unknown type)'
ok 21 - Testing 's conf'
ok 22 - Output received
ok 23 - Output matches '(?-xism:CPANPLUS::Shell::Default)'
ok 24 - Testing 's program'
ok 25 - Output received
ok 26 - Output matches '(?-xism:sudo)'
ok 27 - Testing 's mirrors'
ok 28 - Output received
ok 29 - Output matches '(?-xism:dummy-CPAN)'
ok 30 - Testing 's selfupdate'
ok 31 - Output received
ok 32 - Output matches '(?-xism:selfupdate)'
ok 33 - Testing 'b'
ok 34 - Output received
ok 35 - Output matches '(?-xism:autobundle)'
ok 36 - Testing 'a EUNOXS'
ok 37 - Output received
ok 38 - Output matches '(?-xism:EUNOXS)'
ok 39 - Testing 'm Foo::Bar::EU::NOXS'
ok 40 - Output received
ok 41 - Output matches '(?-xism:Foo::Bar::EU::NOXS)'
ok 42 - Testing 'w'
ok 43 - Output received
ok 44 - Output matches '(?-xism:Foo::Bar::EU::NOXS)'
ok 45 - Testing 'r 1'
ok 46 - Output received
ok 47 - Output matches '(?-xism:README)'
ok 48 - Testing 'r Foo::Bar::EU::NOXS'
ok 49 - Output received
ok 50 - Output matches '(?-xism:README)'
ok 51 - Testing 'f Foo::Bar::EU::NOXS'
ok 52 - Output received
ok 53 - Output matches '(?-xism:EUNOXS)'
ok 54 - Testing 'd Foo::Bar::EU::NOXS'
ok 55 - Output received
ok 56 - Output matches '(?-xism:Foo::Bar::EU::NOXS)'
ok 57 - Testing 'l Foo::Bar::EU::NOXS'
ok 58 - Output received
ok 59 - Output matches '(?-xism:Foo::Bar::EU::NOXS)'
ok 60 - Testing '! die $$; p'
ok 61 - Output received
ok 62 - Output matches '(?-xism:1056974156)'
ok 63 - Testing '/plugins'
ok 64 - Output received
ok 65 - Output matches '(?i-xsm:Available plugins:)'
ok 66 - Testing '/? ?'
ok 67 - Output received
ok 68 - Output matches '(?i-xsm:usage)'
ok 69 - Testing '/? cs'
ok 70 - Output received
ok 71 - Output matches '(?-xism:/cs)'
ok 72 - Testing '/cs --add
file:///$1$dga100/perl-5_10_1/lib/cpanplus/t/dummy-CPAN'
ok 73 - Output received
ok 74 - Output matches '(?-xism:Added remote source)'
ok 75 - Testing '/cs --list'
ok 76 - Output received
ok 77 - Output matches
'(?i-xsm:file\:\/\/\/\$1\$dga100\/perl\-5_10_1\/lib\/cpanplus\/t\/dummy\-CPAN)'
ok 78 - Testing '/cs --contents
file:///$1$dga100/perl-5_10_1/lib/cpanplus/t/dummy-CPAN'
ok 79 - Output received
ok 80 - Output matches '(?i-xsm:EUNOXS)'
ok 81 - Testing '/cs --update'
ok 82 - Output received
ok 83 - Output matches '(?-xism:Updated remote sources)'
ok 84 - Testing '/cs --update
file:///$1$dga100/perl-5_10_1/lib/cpanplus/t/dummy-CPAN'
ok 85 - Output received
ok 86 - Output matches '(?-xism:Updated remote sources)'
ok 87 - Testing '/cs --write
$1$DGA100:[PERL-5_10_1.LIB.CPANPLUS.T]dummy-cpanplus'
ok 88 - Output received
ok 89 - Output matches '(?-xism:Wrote remote source index)'
ok 90 - Testing '/cs --remove
file:///$1$dga100/perl-5_10_1/lib/cpanplus/t/dummy-CPAN'
ok 91 - Output received
ok 92 - Output matches '(?-xism:Removed remote source)'
1..92
cannot opendir for SYS$SYSROOT:[SYSMGR.I1lwoTIS0O]: directory not found
at /$1$DGA100/PERL-5_10_1/lib/File/Temp.pm line 902
t/$1$DGA100/PERL-5_10_1/LIB/CPANPLUS/T/15_CPANPLUS-SHELL....FAILED--extra
output after trailing 1..n
Failed 1 test out of 1, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB.CPANPLUS.T]15_CPANPLUS-SHELL.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=30.62 s=0.00 cu=0.00 cs=0.00 scripts=1 tests=92
30-JUL-2010 18:35:40.60 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 83279 Peak working set size: 27216
Direct I/O count: 37725 Peak virtual size: 220304
Page faults: 228138 Mounted volumes: 0
Images activated: 523
Elapsed CPU time: 0 00:00:30.63
Connect time: 0 03:06:49.68
%SYSTEM-F-ABORT, abort
#######################################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib.ExtUtils.t]cp.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:38:08.36 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 83426 Peak working set size: 27216
Direct I/O count: 37752 Peak virtual size: 220304
Page faults: 228478 Mounted volumes: 0
Images activated: 530
Elapsed CPU time: 0 00:00:30.66
Connect time: 0 03:09:17.44
1..1
not ok 1 - cp updated mtime
t/$1$DGA100/PERL-5_10_1/LIB/EXTUTILS/T/CP....FAILED at test 1
Failed 1 test out of 1, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB.EXTUTILS.T]CP.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=30.79 s=0.00 cu=0.00 cs=0.00 scripts=1 tests=1
30-JUL-2010 18:38:09.94 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 84145 Peak working set size: 27216
Direct I/O count: 37848 Peak virtual size: 220304
Page faults: 229164 Mounted volumes: 0
Images activated: 532
Elapsed CPU time: 0 00:00:30.80
Connect time: 0 03:09:19.02
%SYSTEM-F-ABORT, abort
###########################################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib.ExtUtils.t]pm_to_blib.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:40:00.09 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 84281 Peak working set size: 27216
Direct I/O count: 37871 Peak virtual size: 220304
Page faults: 229499 Mounted volumes: 0
Images activated: 539
Elapsed CPU time: 0 00:00:30.84
Connect time: 0 03:11:09.17
ok 1 - setup
ok 2 - chdir'd to Big-Dummy
ok 3 - run($1$dga100:[000000.perl-5_10_1.t]perl.exe;1 Makefile.PL)
ok 4 - run(MMK)
ok 5 - blib copied pm file
ok 6
ok 7 - run(MMK)
not ok 8
t/$1$DGA100/PERL-5_10_1/LIB/EXTUTILS/T/PM_TO_BLIB....FAILED at test 8
Failed 1 test out of 0, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB.EXTUTILS.T]PM_TO_BLIB.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=31.04 s=0.00 cu=0.00 cs=0.00 scripts=0 tests=0
30-JUL-2010 18:40:43.56 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 85033 Peak working set size: 27216
Direct I/O count: 37954 Peak virtual size: 220304
Page faults: 230133 Mounted volumes: 0
Images activated: 541
Elapsed CPU time: 0 00:00:31.05
Connect time: 0 03:11:52.64
%SYSTEM-F-ABORT, abort
###################################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib.Module.Build.t]debug.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:42:20.60 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 85171 Peak working set size: 27216
Direct I/O count: 37976 Peak virtual size: 220304
Page faults: 230476 Mounted volumes: 0
Images activated: 548
Elapsed CPU time: 0 00:00:31.12
Connect time: 0 03:13:29.68
1..3
ok 1 - require Module::Build;
ok 2 # skip no blib in core
Can't open perl script "Build": no such file or directory
t/$1$DGA100/PERL-5_10_1/LIB/MODULE/BUILD/T/DEBUG....FAILED--unexpected
output at test 2
Failed 1 test out of 1, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB.MODULE.BUILD.T]DEBUG.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=31.25 s=0.00 cu=0.00 cs=0.00 scripts=1 tests=3
30-JUL-2010 18:42:27.50 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 85904 Peak working set size: 27216
Direct I/O count: 38061 Peak virtual size: 220304
Page faults: 231155 Mounted volumes: 0
Images activated: 550
Elapsed CPU time: 0 00:00:31.26
Connect time: 0 03:13:36.58
%SYSTEM-F-ABORT, abort
##########################################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib.Module.Build.t]tilde.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:43:56.20 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 86047 Peak working set size: 27216
Direct I/O count: 38083 Peak virtual size: 220304
Page faults: 231495 Mounted volumes: 0
Images activated: 557
Elapsed CPU time: 0 00:00:31.30
Connect time: 0 03:15:05.28
1..18
ok 1 - use Module::Build;
ok 2 # skip no blib in core
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17 - API does not expand tildes
Use of uninitialized value $home in concatenation (.) or string at
$1$dga100:[000000.perl-5_10_1.lib.module.build.t]tilde.t line 102.
t/$1$DGA100/PERL-5_10_1/LIB/MODULE/BUILD/T/TILDE....FAILED--unexpected
output at test 17
Failed 1 test out of 1, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB.MODULE.BUILD.T]TILDE.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=31.46 s=0.00 cu=0.00 cs=0.00 scripts=1 tests=18
30-JUL-2010 18:44:14.19 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 86851 Peak working set size: 27216
Direct I/O count: 38167 Peak virtual size: 220304
Page faults: 232134 Mounted volumes: 0
Images activated: 559
Elapsed CPU time: 0 00:00:31.46
Connect time: 0 03:15:23.27
%SYSTEM-F-ABORT, abort
###################################################################################
ISTI-MX4> @[.vms]test .exe "" "-v"
$1$DGA100:[000000.PERL-5_10_1.lib]vmsish.t
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]PERL.EXE;1 deleted (16
blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]PERL.EXE;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]PERL.EXE;1 (15 blocks)
%DELETE-I-FILDEL, $1$DGA100:[000000.PERL-5_10_1.t]vmspipe.com;1 deleted
(8 blocks)
%COPY-S-COPIED, $1$DGA100:[000000.PERL-5_10_1]vmspipe.com;1 copied to
$1$DGA100:[000000.PERL-5_10_1.T]vmspipe.com;1 (2 blocks)
30-JUL-2010 18:45:17.84 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 86981 Peak working set size: 27216
Direct I/O count: 38189 Peak virtual size: 220304
Page faults: 232480 Mounted volumes: 0
Images activated: 566
Elapsed CPU time: 0 00:00:31.51
Connect time: 0 03:16:26.92
1..25
ok 1 # skip tests for non-VMS only
ok 2 - simple Perl invokation: POSIX success status
ok 3 - importing vmsish [vmsish status]
ok 4 - unimport vmsish [POSIX STATUS]
ok 5 - lex scope of vmsish [vmsish status]
ok 6 - outer lex scope of vmsish [POSIX status]
ok 7 - importing vmsish exit [POSIX status]
ok 8 - POSIX ERR exit, DCL error message check
ok 9 - vmsish status check, POSIX ERR exit
ok 10 - vmsish OK exit, DCL error message check
ok 11 - vmsish status check, vmsish OK exit
ok 12 - vmsish ERR exit, DCL error message check
ok 13 - vmsish ERR exit, vmsish status check
ok 14 - POSIX ERR exit, vmsish hushed, DCL error message check
ok 15 - vmsish ERR exit, vmsish hushed, DCL error message check
ok 16 - vmsish ERR exit, no vmsish hushed, DCL error message check
ok 17 - die, vmsish hushed, DCL error message check
ok 18 - croak, vmsish hushed, DCL error message check
ok 19 - vmsish ERR exit, vmsish hushed at runtime, DCL error message check
# Failed at $1$dga100:[000000.perl-5_10_1.lib]vmsish.t line 151
# Failed at $1$dga100:[000000.perl-5_10_1.lib]vmsish.t line 157
# Failed at $1$dga100:[000000.perl-5_10_1.lib]vmsish.t line 164
# Failed at $1$dga100:[000000.perl-5_10_1.lib]vmsish.t line 167
ok 20 - compile ERR exit, vmsish hushed, DCL error message check
ok 21 - use vmsish qw(time)
not ok 22 - (time) UTC: 1280511919 VMS: 1280519119
t/$1$DGA100/PERL-5_10_1/LIB/VMSISH....FAILED at test 22
Failed 1 test out of 1, 0.00% okay.
$1$DGA100:[000000.PERL-5_10_1.LIB]VMSISH.T
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
u=31.68 s=0.00 cu=0.00 cs=0.00 scripts=1 tests=25
30-JUL-2010 18:45:19.85 User: SYSTEM Process ID: 3F00044A
Node: MX4 Process name: "SYSTEM"
Accounting information:
Buffered I/O count: 87794 Peak working set size: 27216
Direct I/O count: 38271 Peak virtual size: 220304
Page faults: 233153 Mounted volumes: 0
Images activated: 568
Elapsed CPU time: 0 00:00:31.69
Connect time: 0 03:16:28.93
%SYSTEM-F-ABORT, abort
########################################################################
Regards
Fabio