Re: (fwd) Re: Perl/Tk on Solaris 10

On Feb 7, 2005, at 9:35 PM, Steve Lidie wrote:

> -- forwarded message --
> Path:  
> Lehigh.EDU!newsprint.newsread.com!newsread.com!news-xfer.newsread.com! 
> news.glorb.com!border1.nntp.dca.giganews.com!nntp.giganews.com! 
> local1.nntp.dca.giganews.com!nntp.bway.net!news.bway.net.POSTED!not- 
> for-mail
> NNTP-Posting-Date: Sun, 06 Feb 2005 15:17:16 -0600
> Date: Sun, 06 Feb 2005 16:17:16 -0500
> From: "Mark E. Perkins" <[email protected]>
> User-Agent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US;  
> rv:1.7.5) Gecko/20041217
> X-Accept-Language: en-us, en
> MIME-Version: 1.0
> Newsgroups: comp.lang.perl.tk
> Subject: Re: Perl/Tk on Solaris 10
> Xref: Lehigh.EDU comp.lang.perl.tk:43507
>
> On 2/6/05 10:19, Steve Lidie wrote:
>
>> Mark E. Perkins <[email protected]> wrote:
>>
>>> On 1/28/05 19:28, Adrian J P Waters wrote:
>>>
>>>
>>>> Has anyone managed to get Tk working on Solaris 10?
>>>>
>>>> I can build perl 5.8.6 from source using GCC in either 32/64 bit,  
>>>> but Tk
>>>> fails numerous tests with 'dubious results' when I attempt to  
>>>> install it via
>>>> CPAN.
>>>>
>>>> Is Tk just not Solaris 10 compatible, or is something else going on?

Sorry, cannot speak to/on/about Solaris.

>>>>
>>>>
>>>
>>> I'm getting similar behavior under Mac OS X 10.3.7. Perl 5.8.6  
>>> builds and
>>> tests successfully. Tk 804.027 builds but testing numerous 'dubious
>>> results' as well as outright failures.
>>>
>>> It looks like this Perl was built with threads. Is that the problem?  
>>> Or is
>>> this a generl 5.8.6 issue?
>>
>>
>> Anyone care to show us error messages?
>
> Of course. Before doing so, I thought I'd see whether this was a known
> problem, or if I'm just lucky. Be aware that the 'make Tk' phase  
> completed
> without a hitch.

You must just be lucky ;)

>
> I will also note that I re-read the pTk README, which indicates that a
> threaded perl should be OK....

My current Perl and Tk is Perl 5.8.2 and Tk 804.027.   I just fetched  
and compiled Perl 5.8.6 and built Tk 804.027 against that Perl w/o  
problems. Whew. Good news for me.

>
> First the output from 'perl -V', then the output from 'test Tk':
>
> ======================================================================
> ======================================================================
> -> perl -V
> Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
>    Platform:
>      osname=darwin, osvers=7.7.0, archname=darwin-thread-multi-2level
>      uname='darwin crow.fringe.mep 7.7.0 darwin kernel version 7.7.0:  
> sun
> nov 7 16:06:51 pst 2004; root:xnuxnu-517.9.5.obj~1release_ppc power
> macintosh powerpc '
>      config_args='-sde -Dprefix=/Volumes/NetBSD/pkg
> -Dscriptdir=/Volumes/NetBSD/pkg/bin -Darchname=powerpc-darwin -Dcc=gcc
> -pipe -Doptimize=-O2  -D_REENTRANT -I/usr/include  
> -Dinstallstyle=lib/perl5
> -Duseshrplib -Ui_malloc -Uusemymalloc -Uinstallusrbinperl -Dman3ext=3
> -Dman3dir=/Volumes/NetBSD/pkg/lib/perl5/5.8.6/man/man3
> -Dsiteman3dir=/Volumes/NetBSD/pkg/lib/perl5/site_perl/man/man3
> -Dman1dir=/Volumes/NetBSD/pkg/man/man1 -Dsiteprefix=/Volumes/NetBSD/pkg
> -Dsiteman1dir=/Volumes/NetBSD/pkg/man/man1 -Duseithreads  
> -Dlibswanted=m c
> pthread'
>      hint=recommended, useposix=true, d_sigaction=define
>      usethreads=define use5005threads=undef useithreads=define
> usemultiplicity=define
>      useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
>      use64bitint=undef use64bitall=undef uselongdouble=undef
>      usemymalloc=n, bincompat5005=undef
>    Compiler:
>      cc='gcc -pipe', ccflags ='-fno-common -DPERL_DARWIN  
> -no-cpp-precomp
> -fno-strict-aliasing -pipe -I/Volumes/NetBSD/pkg/include',
>      optimize='-O2 -D_REENTRANT -I/usr/include',
>      cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN  
> -no-cpp-precomp
> -fno-strict-aliasing -pipe -I/Volumes/NetBSD/pkg/include'
>      ccversion='', gccversion='3.3 20030304 (Apple Computer, Inc. build
> 1671)', gccosandvers=''
>      intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
>      d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
>      ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
> lseeksize=8
>      alignbytes=8, prototype=define
>    Linker and Libraries:
>      ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags ='
> -L/Volumes/NetBSD/pkg/lib'
>      libpth=/Volumes/NetBSD/pkg/lib /usr/lib
>      libs=-lm -lc -lpthread
>      perllibs=-lm -lc -lpthread
>      libc=/usr/lib/libc.dylib, so=dylib, useshrplib=true,  
> libperl=libperl.dylib
>      gnulibc_version=''
>    Dynamic Linking:
>      dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
>      cccdlflags=' ', lddlflags='    -bundle -undefined dynamic_lookup
> -L/Volumes/NetBSD/pkg/lib'
>
>
> Characteristics of this binary (from libperl):
>    Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES
> PERL_IMPLICIT_CONTEXT
>    Built under darwin
>    Compiled at Feb  5 2005 20:58:19
>    @INC:
>       
> /Volumes/NetBSD/pkg/lib/perl5/site_perl/5.8.6/darwin-thread-multi 
> -2level

Ah, it looks like you yourself did not build this Perl.  Right?  You  
seem to have an other-Perl mounted on your desktop ...


>      /Volumes/NetBSD/pkg/lib/perl5/site_perl/5.8.6
>      /Volumes/NetBSD/pkg/lib/perl5/site_perl/5.8.4
>      /Volumes/NetBSD/pkg/lib/perl5/site_perl
>      /Volumes/NetBSD/pkg/lib/perl5/5.8.6/darwin-thread-multi-2level
>      /Volumes/NetBSD/pkg/lib/perl5/5.8.6
>      .
>
> ======================================================================
> ======================================================================
> cpan> test Tk
> Running test for module Tk
> Running make for N/NI/NI-S/Tk-804.027.tar.gz
>    Is already unwrapped into directory  
> /Users/mep/.cpan/build/Tk-804.027
>    Has already been processed within this session
> Running make test
> cd pTk && /usr/bin/make DEFINE=""
> cd zlib && /usr/bin/make libz.a "CC=gcc -pipe  " RANLIB="/usr/bin/ar  
> ts"
> make[2]: `libz.a' is up to date.
> make[2]: Nothing to be done for `all'.
> make[2]: Nothing to be done for `all'.
> cd jpeg && /usr/bin/make libjpeg.a
> make[2]: `libjpeg.a' is up to date.
> make[2]: Nothing to be done for `all'.
> PERL_DL_NONLAZY=1 /usr/pkg/bin/perl "-MExtUtils::Command::MM" "-e"
> "test_harness(0, 'blib/lib', 'blib/arch')" t/JP.t t/KR.t t/Require.t
> t/Trace.t t/X.t t/after.t t/autoload.t t/balloon.t  
> t/browseentry-grabtest.t
> t/browseentry-subclassing.t t/browseentry.t t/browseentry2.t t/button.t
> t/create.t t/cursor.t t/dash.t t/dialogbox.t t/entry.t t/fbox.t
> t/fileevent.t t/fileselect.t t/font.t t/fork.t t/geomgr.t t/iso8859-1.t
> t/leak.t t/list.t t/listbox.t t/listvar.t t/magic.t t/mega.t t/mwm.t
> t/optmenu.t t/photo.t t/pixmap.t t/progbar.t t/regexp.t t/slaves.t
> t/trace1.t t/widget.t t/wm-time.t t/wm.t t/zzHList.t t/zzPhoto.t
> t/zzScrolled.t t/zzText.t t/zzTixGrid.t
> t/after......................ok
> t/autoload...................ok
> t/balloon....................ok
> t/browseentry-grabtest.......ok
> t/browseentry-subclassing....dubious
>          Test returned status 0 (wstat 10, 0xa)
>          after all the subtests completed successfully
> t/browseentry................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 8-15
>          Failed 8/15 tests, 46.67% okay
> t/browseentry2...............ok
> t/button.....................ok
> t/create.....................dubious
>          Test returned status 0 (wstat 11, 0xb)
> DIED. FAILED tests 11-528
>          Failed 518/528 tests, 1.89% okay
> t/cursor.....................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 1-7
>          Failed 7/7 tests, 0.00% okay
> t/dash.......................ok
> t/dialogbox..................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 3-8
>          Failed 6/8 tests, 25.00% okay
> t/entry......................dubious
>          Test returned status 0 (wstat 11, 0xb)
> DIED. FAILED tests 3-336
>          Failed 334/336 tests, 0.60% okay
> t/fbox.......................ok
> t/fileevent..................ok
> t/fileselect.................ok
> t/font.......................ok
> t/fork.......................ok
> t/geomgr.....................dubious
>          Test returned status 0 (wstat 11, 0xb)
> DIED. FAILED tests 2-19
>          Failed 18/19 tests, 5.26% okay
> t/iso8859-1..................ok
> t/JP.........................skipped
>          all skipped: locale's 'iso-8859-1' cannot represent Japanese.
> t/KR.........................skipped
>          all skipped: locale's 'iso-8859-1' cannot represent Korean.
> t/leak.......................ok
> t/list.......................ok
> t/listbox....................ok
>          4/437 skipped: various reasons, 3/437 unexpectedly succeeded
> t/listvar....................ok
> t/magic......................ok
> t/mega.......................ok
> t/mwm........................ok
> t/optmenu....................ok
> t/photo......................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 2-100
>          Failed 99/100 tests, 1.00% okay
> t/pixmap.....................ok
> t/progbar....................ok
> t/regexp.....................ok
> t/Require....................ok
> t/slaves.....................ok
> t/Trace......................ok
> t/trace1.....................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 3-17
>          Failed 15/17 tests, 11.76% okay
> t/widget.....................ok
> t/wm-time....................dubious
>          Test returned status 0 (wstat 11, 0xb)
> DIED. FAILED tests 1-6
>          Failed 6/6 tests, 0.00% okay
> t/wm.........................ok
> t/X..........................ok
> t/zzHList....................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 5-23
>          Failed 19/23 tests, 17.39% okay
> t/zzPhoto....................ok
> t/zzScrolled.................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 5-94
>          Failed 90/94 tests, 4.26% okay
> t/zzText.....................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 9-22
>          Failed 14/22 tests, 36.36% okay
> t/zzTixGrid..................dubious
>          Test returned status 0 (wstat 10, 0xa)
> DIED. FAILED tests 7-33
>          Failed 27/33 tests, 18.18% okay
> Failed Test                 Stat Wstat Total Fail  Failed  List of  
> Failed
> ----------------------------------------------------------------------- 
> --------
> t/browseentry-subclassing.t    0    10     2    0   0.00%  ??
> t/browseentry.t                0    10    15   16 106.67%  8-15
> t/create.t                     0    11   528 1036 196.21%  11-528
> t/cursor.t                     0    10     7   14 200.00%  1-7
> t/dialogbox.t                  0    10     8   12 150.00%  3-8
> t/entry.t                      0    11   336  668 198.81%  3-336
> t/geomgr.t                     0    11    19   36 189.47%  2-19
> t/photo.t                      0    10   100  198 198.00%  2-100
> t/trace1.t                     0    10    17   30 176.47%  3-17
> t/wm-time.t                    0    11     6   12 200.00%  1-6
> t/zzHList.t                    0    10    23   38 165.22%  5-23
> t/zzScrolled.t                 0    10    94  180 191.49%  5-94
> t/zzText.t                     0    10    22   28 127.27%  9-22
> t/zzTixGrid.t                  0    10    33   54 163.64%  7-33
>   (3 subtests UNEXPECTEDLY SUCCEEDED), 2 tests and 4 subtests skipped.
> Failed 14/47 test scripts, 70.21% okay. 1161/2054 subtests failed,  
> 43.48% okay.
> make: *** [test_dynamic] Error 2
>    /usr/bin/make test -- NOT OK
>
> cpan>
> -- end of forwarded message --


Above not at all normal.  This is more normal, on Mac OS X 10.3.7  
Panther:

   566  tar -zxpf perl-5.8.6.tar.gz
   567  cd perl-5.8.6
   569  sh Configure -des -Dprefix=/tmp
   570  make test
   571  make install
   572  PATH=/tmp/bin:$PATH
   573  which perl
   574  perl -v
   575  cd ../Tk-804.027
   576  make distclean
   577  perl -v
   578  perl Makefile.PL ;make
   579  make test

Please try to build Perl and Tk as above and report results and OS  
version, etc. Thanks,

Steve

-++**==--++**==--++**==--++**==--++**==--++**==--++**==
This message was posted through the Stanford campus mailing list
server.  If you wish to unsubscribe from this mailing list, send the
message body of "unsubscribe ptk" to [email protected]